Twin Mini Compact Horn Twin Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replacement for many common OEM horns. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577061. |
Twist Type Hatch Adjuster with Elbow - 14" Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc. |
Two Pole Side Mount Rod Storage Rack - Black These Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws. |
Two Pole Side Mount Rod Storage Rack - White These Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws. |
Two Socket Mounting Plate Only - 10 Pack This dual power socket/meter panel accommodates USB and standard power sockets and meters that are 1-1/8 inches in diameter. Constructed of injection-molded nylon. Specifications:
|
Universal Safety Kill Switch The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
USB Map Light Add light anywhere a USB port is present. This USB map light features 10 bright LEDs and a flexible 7” gooseneck that can rotate 360° illuminating any dark corner. A three function touch switch provides a full 10 bulb brightness mode as well as a 5 bulb half bright mode. Light head is detachable for easy storage. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Washdown Faucet - Chrome Plated Brass The Washdown Faucet is ideal for exterior fresh water washdown applications. Allows control of water flow on exterior surface. Pipe size: 1/2" FIPT x 3/4" MGHT. Constructed of chrome plated brass. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Washdown Water Outlet - 316 Stainless Steel The Washdown Water Outlet allows for a garden hose to be hooked up to the onboard water system for use as a washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. Pipe size: 1/2" FIPT x 3/4" MGHT. Constructed of corrosion resistant investment cast 316 stainless steel. |
Water Resistant Toggle Switch Panel Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features six 15A 12VDC toggle switches with blue LED indicator lights, ATC fuse holders, and decal sheet. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Water Resistant Toggle Switch Panel with LED Power Socket - 5 Toggle Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted power socket, ATC fuse holders, and decal sheet. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Water Resistant Toggle Switch Panel with USB Power Socket - 5 Toggle Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted double USB power socket, ATC fuse holders, and decal sheet. USB power socket output is 4.8A, 2.4A per side. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Waterproof Standard Wiper Motor Kit 2-1/2" - 110° Waterproof Standard Wiper Motor Kit includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of corrosion resistant powder coated aluminum housing with stainless steel base plate, shaft, and knurled drive nut. IP66 rating. CE compliant. 3-year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Waterproof Standard Wiper Motor Kit 2-1/2" - 80° Waterproof Standard Wiper Motor Kit includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of corrosion resistant powder coated aluminum housing with stainless steel base plate, shaft, and knurled drive nut. IP66 rating. CE compliant. 3-year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
White LED Navigation Lights - Port & Starboard LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. 400071 is constructed of injection molded ABS. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Windshield Washer Kit Complete - Plastic This Windshield Washer Kit comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles, and mounting bracket. Tank capacity is 2.5 liters (2.66 quarts). Installs with two #10 RH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware. |
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 18" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware. |
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 24" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |