Shop by Brand: Sea-Dog

Heavy Duty Battery Box Strap - 48" 

Heavy Duty Battery Box Strap includes a woven polypropylene strap, stainless steel buckle, two chrome plated brass brackets, and four #8 FH fasteners.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon

These quality stainless steel Heavy Duty Canvas & Upholstery Scissors are designed with offset handles to allow the blades to hug the work surface, giving you clean and precise cutting characteristics with both thin and thick materials. Constructed with a heavy duty stainless steel blade for optimum performance and long-lasting sharpness. Fine, precision-ground, serrated edge ensures effortless cutting. Comfortable soft cushion grip and adjustable blade tension to reduce fatigue. Ideal for all heavy duty cutting including rubber, vinyl, leather, plastics, cordage, upholstery, Kevlar, and canvas.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hidden Mount Mini Compact Horn 

Hidden Mount Mini Compact Horn is constructed of powder coated steel. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577068.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ignition Safety Kill Switch 

Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. The kill switch includes a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Inboard Motor Flush

Molded Rubber/Aluminum 

Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.

Ladder Lock - Chrome Brass

These highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a chrome plated finish. Installs with eight #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ladder Lock - Brass

These highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a plain finish. Installs with eight #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Leather Mooring Line Chafe Kit - 1/2" 

Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Leather Mooring Line Chafe Kit - 3/4" 

Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Leather Mooring Line Chafe Kit - 3/8" & 7/16" 

Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Leather Mooring Line Chafe Kit - 5/8" 

Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Cockpit Spreader Light 1440 Lumens - Black

These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Available in black or white. Low amp draw. 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Cockpit Spreader Light 1440 Lumens - White

These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Available in black or white. Low amp draw. 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Flush Mount Combo Drink Holder with Drain Fitting - Blue LED

The corrosion resistant stamped 304 stainless combo LED drink holders feature three LEDs, available in red for night vision. The flush mount dual-purpose design allows the use of beverage cans with or without insulated wraps as well as most standard size bottles. Integral drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" hole for installation. The bottom is padded with a rubber insert to prevent rattling. 12VDC.

LED Flush Mount Combo Drink Holder with Drain Fitting - Red LED

The corrosion resistant stamped 304 stainless combo LED drink holders feature three LEDs, available in red for night vision. The flush mount dual-purpose design allows the use of beverage cans with or without insulated wraps as well as most standard size bottles. Integral drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" hole for installation. The bottom is padded with a rubber insert to prevent rattling. 12VDC.

LED Fold Down All Around Light for Pontoon Boat - 24"

LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

LED Fold Down All Around Light for Pontoon Boat - 9" 

LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Masthead Light - 2 NM - 225° 

LED 225° Masthead Lights are fixed mounted and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Pop Out Combination Bow Light

The LED Pop-Out Combination Bow Light is approved for USCG 2 NM (Colreg 2 mile). A simple twist of the cap allows the light to pop up, ready to use when it’s switched on. Push the cap down, twist to lock, and light disappears into the deck. Constructed of corrosion resistant investment cast stainless steel cap and bezel. Installs with three #10 fasteners (included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Removable Telescopic All Around Light - 26" - 48" 

LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED RGB Rod Holder with Tube Insert

These LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Insert (325189, sold separately). Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately). 

Specifications:

• Constructed of formed 304 stainless steel
• Patented
• Watts: 2.6W
• Voltage: 12V

LED Rod Holder Cap Light - 2" Diameter

LED RGB Rod Holder Cap attaches to the bottom of any 2” diameter rod holder. A Bluetooth Smart Phone Controller (403051-1) lets you operate this RGB LED Rod Holder Cap from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB Rod Holder Caps with an optional terminal block (426624). 

Specifications:

• Lumens: 200
• Watts: 2.4W
• Voltage: 12V
• Light Color: RGB
• LEDs: 12
• Patented 

* Sold in Pairs

LED Tube Insert for Existing Rod Holders 11' Long Cut To Fit Any Angle

Retrofit your existing rod holder with the LED RGB Tube Insert. Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder Tube Insert from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately). Patented.

Features:

• 10" x 1-5/8" x 12"
• Weight: 0.25

Magneto Safety Kill Switch 

Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The magneto (red cap) version functions in applications where the circuit is normally open (not complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is closed (complete), allowing grounding to a suitable ground such as a grounding block, the battery, or a suitable area on the engine itself. The kill switch includes a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Max Blast Single Mini Compact Horn 

Max Blast Single Mini Compact Horn is constructed of injection molded housing under the stamped 304 stainless steel cover, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577060.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Max Blast Twin Mini Compact Horn 

MaxBlast Twin Mini Compact Horn is constructed of injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn - Dual Trumpet 

MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66’). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn - Mini Dual Trumpet 

MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66’). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn Compressor - 12V

The MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. Maximum: 20A. 12 or 24VDC. CE compliant.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn Compressor - 24V

The MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. Maximum: 20A. 12 or 24VDC. CE compliant.

MaxBlast Stainless Steel Trumpet 12V Horn - Dual

MaxBlast Dual Trumpet Air Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage. 

Specifications:

• Stainless Steel
• Dual
• 12V

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.