MaxBlast Stainless Steel Trumpet 12V Horn - Single MaxBlast Single Trumpet Air Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage. Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Motor Well Boot - 3" Split Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. |
Motor Well Boot - 4" Split Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. 5 1/2" diameter |
Motor Well Boot - 5-1/2" Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Includes mounting ring. |
Mounting Plate for 325190 Rod Holder Mounting Plate only for the 325190 30° removable rod holder. |
Multi-Purpose Cutter Replacement Anvil This is a replacement anvil only for Sea-Dog's multi-purpose cutter, which is great for cutting rope, wire, and plastic tubing. Features:
|
Multi-Tool with Knife Blade - 304 Stainless Steel This handy Multi-Tool includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file, and saw. Constructed of corrosion resistant stamped 304 stainless steel. A must have for every tool bag! Includes canvas carrying case. |
Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included). |
Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included). |
Nylon Adjustable Flagpole Clamps - 1/2" - Pair The flag is attached to the flagpole using sliding, black nylon pennant mounts. Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags. |
Nylon Angled Deck Hinge - Black Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Angled Deck Hinge - White Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Boat Hook/Paddle Clip UV stabilized injection molded nylon construction. One-piece boat hook/paddle clip allows for the simple one handed storage of your boat hook or paddle. Anti-snag ramps prevent line from getting stuck under the clip when not in use. Features leash attachment points for securing a paddle leash. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Nylon Concave Deck Hinge - Black Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Concave Deck Hinge - White Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Deck Fill Key Deck Fill Key is constructed of injection molded black nylon. For use with all Fill Caps featuring 1-3/16" holes on center. |
Nylon Deck Hinge - Black Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Deck Hinge - White Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Fendermate™ Fendermate™ is the latest in fender brackets. Clamps securely on both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire. Unique double locking action locks the clamp on the rail or wire while still allowing full adjustment of the height of the fender. When the proper height is reached, the final locking action clamps the rope quickly and securely. Constructed of marine grade reinforced injection molded nylon. |
Nylon Flagpole Pennant Mounts & Stainless Clips - Pair The Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either 7/8" or 1" tubing. Maximum speed 10 MPH. |
Nylon Small Deck Hinge - Black Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Small Deck Hinge - White Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white. |
Nylon Square Tube Top Insert - Black - 1" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Square Tube Top Insert - White - 1" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Switch Panel - Water Resistant - 5 Toggles with Power Socket The Water Resistant Toggle Switch Panel features five 15A 12VDC toggle switches, a 12VDC power socket, inline fuse holders, and a decal sheet. Constructed of injection molded ABS. Installs with four #6 RH fasteners (not included). |
Nylon Top Cap - Black - 3/4" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Cap - Black - 7/8" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Cap - White - 3/4" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Cap - White - 7/8" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Insert - Black - 3/4" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Insert - Black - 7/8" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
Nylon Top Insert - White - 3/4" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |