Shop by Brand: Sea-Dog

Splash Guard Switch Panel Vertical - 4 Switch

The Splash Guard Vertical 4-Gang Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4” x 1-1/4” glass style fuses. Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where the front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with four #6 RH fasteners (not included). CE compliant. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Square Tube Rail Mount Fillet Table - 20" 

Features:

• Solid one-piece construction for long life and easy maintenance
• Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware
• UV stabilized high-density polypropylene construction
• Medium, 20" wide by 12-5/8" deep
• Fits Square Tubing 1" - 1-1/4" diameter
• UV stabilized, high-density polypropylene
• Assembles in minutes, with all assembly hardware included
• Easily accessible knife and pliers holders, large includes hose holder and towel bar
• Knives and pliers not included

Square Tube Rail Mount Fillet Table - 30" 

Features:

• Solid one-piece construction for long life and easy maintenance
• Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware
• UV stabilized high-density polypropylene construction
• Large, 30" wide by 12-5/8" deep with towel bar
• Fits Square Tubing 1" - 1-1/4" diameter
• UV stabilized, high-density polypropylene
• Assembles in minutes, with all assembly hardware included
• Easily accessible knife and pliers holders, large includes hose holder and towel bar
• Knives and pliers not included

SS Maneuvering Knob with Black Nylon Insert 

Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). Designed for 1" x 3/4" oval tubing. Direct replacement for 230323 and 230325.

SS Rope & Accessory Holder

This wall mounted Rope & Accessory Hanger is a great storage management solution. Ideal for the organization of ropes, water hoses, extension cords, etc. Deep hooks keep line in place even when heeling over. Constructed of corrosion resistant 304 stainless steel. Installs with three 1/4" RH fasteners (not included). 

Ropes, Lines, Cordsets!

SS Steering Wheel Maneuvering Knob 

Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). A steering knob attaches to the wheel for use in situations where maneuvering is excessive. It allows the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance this knob is designed for use with 1" x 3/4" oval tubing.

Stainless 1" Hinged Jaw Slide with Bolt

These Slide Fittings are used as part of a Bimini top system to install a new Bimini top, add additional support arms to an existing one, or customize a cock pit or sun deck awning. Jaw Slides attach an eye end securely to support tubing. The set screw on the back allows you to quickly and easily adjust the placement of these slides where they are needed. Hinged Jaw Slides are ideal for mounting on handrails, or in applications where it is not possible or convenient to slide the fitting onto the tubing. Jaw Slides fit tubing from 3/4” – 1-1/8”. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion-resistant investment cast 316 stainless steel.

Specifications:

• Tube OD: 1"
• Pin Size: 1/4"
• Weight: 0.38

Stainless Heavy Duty Hasp - 2-11/16"

This heavy-duty hasp is designed with a slotted plate that fits over a fixed post. Prevents removal when used in conjunction with a padlock. For added security, all mounting screws are concealed when the hasp is closed. Ideal for securing lockers, cupboards, chests, or hatch doors. Constructed of corrosion-resistant stamped 304 stainless steel. Installs with seven #6 FH fasteners (not included). 

Specifications:

• Length (inch): 2-11/16"
• Width (inch): 1-3/16"
• Depth (inch): 7/8"
• Hasp Eyelet Width (inch): 1/2"
• Hasp Eyelet to Hasp Pin (inch): 1-7/8"
• Fastener: #6 FH
• Weight: .07 lb.

Stainless Heavy Duty Top Cap - 1"

Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.

Stainless Impeller Puller - Large

Investment Cast 316 Stainless Steel.

Dimensions:

• Width: 3-3/4"
• Height: 6-3/4"
• Thread: 7/16" 

Stainless Impeller Puller - Small

Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes.

Stainless Square Tube Top Fitting

Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.

Stainless Steel & Nylon Hinge Adjustable Angle

These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 180° Adjustable Hinge allows universal mounting at almost any angle including vertical mounting. Removable Pin Deck Hinges feature a spring loaded quick release pin for easy top removal. 1/4” or 5/16” pin size. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two FH fasteners (not included).

Stainless Steel 90° Concave Base Deck Hinge

Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.

Stainless Steel 90° Concave Base Deck Hinge - Removable Pin

Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.

Stainless Steel 90° Deck Hinge

Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.

Stainless Steel 90° Flush Mount Rod Holder 

A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).

Stainless Steel All Around Light 

360° All Around Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Anchor Chocks for 5-20lb Anchor

Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. For use with conventional fluke anchors from 5-20 lbs. Constructed of corrosion resistant investment cast 316 stainless steel. Deck mounts with ten #10 FH fasteners (not included).

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"

316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.

Specifications:

• Chain Size: 1/4" to 5/16"
• Strength: 5500lbs
• Material: Stainless Steel
• Length: 3-9/16"
• Width: 5/8"

Stainless Steel Anchor Swivel for Chain Size 5/16"-1/2"

316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.

Specifications:

• Chain Size: 5/16" to 1/2"
• Strength: 17000lbs
• Material: Stainless Steel
• Length: 4-11/16"
• Width: 13/16"

Stainless Steel Angle Base Deck Hinge

Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.

Stainless Steel Angle Base Deck Hinge - Removable Pin

Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.

Stainless Steel Bow Eye - 3/8" x 4-1/4"

These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.

Stainless Steel Butterfly Vent - Center Knob - 4" 

Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).

Stainless Steel Butterfly Vent - Center Knob - 5" 

Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).

Stainless Steel Case Hose Deck Fill Fits 1-1/2" Hose - Diesel

These Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Stainless Steel Cast Hose Deck Fill Fits 1-1/2" Hose - Body Only

These Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Stainless Steel Cast Hose Deck Fill Fits 1-1/2" Hose - Gas

The Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Stainless Steel Cast Hose Deck Fill Fits 1-1/2" Hose - Waste

These Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Stainless Steel Cast Hose Deck Fill Fits 1-1/2" Hose - Water

These Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.