CP470 CHIRP Sonar Module
High-Performance Sonar Module For Offshore and Coastal Fishing CHIRP Sonar Module Engineered for serious anglers, the CP470 sonar module bring best-in-class target separation and high resolution CHIRP sonar imagery to Raymarine multifunction displays. Using a wide spectrum of frequencies and greater sensitivity the CP470's advanced CHIRP transceiver can see through dense schools of baitfish, identify thermoclines, and simultaneously target desired game fish. Rated for offshore use and rough conditions, the CP470 intelligently filters out unwanted noise while producing high resolution fish targets and reliable bottom tracking. Serious Offshore Sonar Superior target definition and enhanced sensitivity using Raymarine's exclusive wide spectrum CHIRP sonar technology. Target fish, identify bait, and track the sea floor down to 10,000' (3,000M) with two adjustable CHIRP sonar channels. Stunning Detail & Clarity With 10 times the resolution of ordinary sonars the CP470 delivers sharper, more defined fish targets and automatically filter out unwanted noise so you never miss the action below. TruZoom magnification mode reveals extra target detail without any loss of resolution. Easy To Customise Choose optional low, medium, and high CHIRP frequency transducers in standard or wide-beam to match your fishing preferences. The CP470 automatically recognizes connected transducers and adjust sonar parameters for optimized performance View and control each CHIRP channel independently and create your own combination of full or split screen sonar windows on Raymarine's LightHouse II powered multifunction displays. Features
Sonar Performance
|
CP470/CP570 Transducer Extension Cable - 5M Raymarine's 5M transducer extension cable specifically for CP470 and CP570. |
CPT-100 DVS Transom Mount CHIRP Transducer
|
CPT-110
Plastic Thru-Hull Transducer for CP100 Sonar Module Contains two elements, one for the conical beam CHIRP sonar (center frequency 200kHz) the other for the DownVision CHIRP sonar (center frequency 350kHZ) Contains a temperture sensor 10M Cable |
CPT-120 Bronze High Speed Thru Hull Chirp Transducer with Fairing Block
Raymarine's exclusive line of DownVision transducers pair a conical CHIRP fishfinding element with a wide beam DownVision element. The result is an unrivaled level of subsurface visibility. Features:
|
CPT-60 Transom Mount Dual Element CHIRP Transducer
The Perfect Match For maximum performance, Dragonfly is paired with Raymarine's exclusive CPT-60 dual element CHIRP transducer. Engineered to be a perfect acoustic match to Dragonfly's CHIRP sonar, the CPT-60 is equipped with a 1.4° ultra wide fan-shaped beam for a wide view of DownVision images and industry-leading resolution. The CPT-60 second element provides a conical shaped beam for imaging fish targets, ensuring you will never miss any of the action below your boat. The CPT-60's hydrodynamic design provides excellent high-speed performance, and an optional trolling motor mount offers added mounting flexibility. |
CPT-DV Trandsom Mount Transducer f/Dragonfly 4 & 5
The CPT-DV should be used with the new Dragonfly 4DV and WiFish. Features
|
CPT-DV/CPT-DVS Mounting Kit
Transom Mount Bracket for CPT-DV & CPT-DVS |
CPT-DVS Transducer Transom Mount f/Dragonfly 4 & 5
The CPT-DVS Transducer is a dual element CHIRP transducer that features a 1.4° ultra-wide fan shaped beam for wide DownVision images, as well as a second conical shaped beam for excellent fish targeting. In addition, this device senses the depth and temperature of the water. It is equipped with a 19.7' cable and includes a transom mount bracket. The Raymarine CPT-DVS Transducer is usable with Dragonfly 4DVS and 5DVS fish finders. The CPT-DVS can be used with the new Dragonfly 4" and 5" models. If using with an original Dragonfly 5.7" or 7" model, use the A80331 Adapter Cable. Features:
|
CPT-S High CHIRP Bronze Thru-Hull Flush Mount Transducer - 0° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package. With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted bronze Thru Hull High CHIRP transducer compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accomodates hulls with a deadrise between 0-5 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features:
|
CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 12° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package. With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 7-17 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features:
|
CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 20° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package. With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 15-25 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features:
|
CPT-S In-Hull CHIRP Transducer The CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP sonar operation centered on 200kHz. The CPT-S in-hull directly connects to Element S series units. Will connect to Axiom RV/Axiom Pro RVX and Element HV using the A80490 (Axiom) or A80559 (Element HV) adapters. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise. |
CPT-S Thru-Hull - High Chirp - Bronze - 12° Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element. Also connects to Axiom Pro S series Units with optional adapter cable A80490 Features:
|
CPT-S Thru-Hull - High Chirp - Bronze - 20° Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element. Also connects to Axiom Pro S series Units with optional adapter cable A80490 Features:
|
CPT-S Thru-Hull - High Chirp - Plastic - 0°
Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element. Features:
|
CPT-S Transom Mount - Conical - High Chirp Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element. Also connects to Axiom Pro S series Units with optional adapter cable A80490 Features:
|
TA070 Cradle for Race Master
|
These transducers have been included as standard with mn100 T100 Speed and Depth systems since August 2004. Prior to this the T100 was supplied with the T905 Shorty Depth Transducer. Supplied with 6 meters of cable.
Features:
|
Devicenet (M) to STng (F) Adaptor This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other. |
Devicenet (M) to STng (F) Adaptor - 90° This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other. |
Devicenet Female ADP Cable - SeaTalkng - NMEA 2000
Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. Female: 15.7" (0.4m) |
Devicenet Male ADP Cable SeaTalkng to NMEA 2000
Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. Male: 1.5M cable |
Dragonfly 4/5 Slip-Over Sun Cover
Protective sun cover for Dragonfly 4 & Dragonfly 5 Units Slips over unit and fits like a glove |
Dragonfly 7 PRO Slip-Over Sun Cover
Protective sun cover for Dragonfly 7 Units Slips over unit and fits like a glove |
Dragonfly Ice Fishing Kit Transform your Raymarine Dragonfly into the ultimate ice fishing machine. The Raymarine Ice Fishing Kit includes everything cold weather anglers need to unleash the power of Dragonfly sonar on the ice. With a waterproof bag and rugged base designed specifically for the Dragonfly, this portable kit is built to withstand the elements. The Ice Fishing Kit houses a rechargeable battery, charger,and high-frequency CHIRP CPT-S ice fishing transducer with float. Full-sized cargo pockets provide ample room for tackle and the integrated rod holders make it easy to travel with all your gear. The Raymarine Ice Fishing Kit truly is an all-in-one portable fishing package. Features:
Kit Includes:
|
Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for ST60, ITC-5, I50 comes with spade connectors.
|
E120 Classic To Axiom Pro 12 Adapter Plate Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Classic Display. |
E120W to Axiom Pro 12 Adapter Plate to New Fixing Holes Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120W Display. |
E140W/e165 To Axiom Pro 16 Adapter Plate Powder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 16" multifunction displays in place of a E140W/e165 Display. |
SeaTalk 1 to SeaTalkng Converter Kit
The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including:
Features:
|
Compatible with the following instruments:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |