Verado Hydraulic Hose Kit
The Verado Hydraulic Hose Kit is a kit specifically designed for installing a SmartPilot Autopilot System on Mercury Verado Engines. |
VHF NMEA0183 To SeaTalkng Converter Kit
Raymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network. |
EVC Link Cable
Connects Y-Loom to ECI-100 Unit 1 Meter |
TA125 Wind Transmitter Battery Pack and Seal Kit
|
Wind Vane & Cups
Compatible Devices:
|
TA100 Wind Vane, bearing & stud kit
|
T122 Micronet Wireless NMEA Interface
Key Features
Product Description This interface enables sailors to integrate other marine electronics into any of the Micronet instrument range. Compatible with instruments using the NMEA language, the Wireless NMEA Interface (2 inputs/1 output) collects data from autopilots, GPS, chartplotters, PDAs and other on board instruments and transmits it wirelessly to the Micronet displays. Plugged into an on board PC, Micronet can send and receive information so that navigation and tactical software can be displayed anywhere on deck. The Wireless NMEA Interface may be used with PC software to create custom pages on the T110 Micronet Digital Display using Proprietary NMEA Sentences. |
The Micro Compass proved a huge advantage over competitors using glass ball compasses. To win races you must react to even small wind shifts. Readable, precise and reliable heading information from you compass is critical. Digital compasses deliver this data right into your natural field of view, where you need it, how you need it, when you need it. The Micro Compass's tactical scale gives you clear stable figures corresponding on port and starboard tack. The readings whilst tacking are always the same, meaning you never have to remember numbers.
Data Displayed:
Features:
|
The ultimate tactical race compass and windshift indicator. Its two-tier display shows your heading, how far you are above or below the mean course, and how much you are being headed or lifted. It will enable you to establish quickly and easily which is the favoured end of the start line, and will help you sail the shortest distance to the windward mark. Downwind, you can see how far off dead downwind you are, and when you should gybe for optimal VMG.
Features:
|
Multifunction digital analogue display for the Micronet system. Shows Apparent or True Wind Speed and Direction along with CH/VMG, GPS and Heading Information.
Key Features:
|
Not just a remote control, this is an independent, Micronet, wireless, palm sized display. With a dot matrix screen it not only shows you all the data in your system, but also incorporates a rolling road, as well as performance pages for uploads from your tactical software, and it can function as a remote control for your Micronet displays. You can add as many handsets as you need for the key members of your crew.
Key Features:
|
T222 Vertical Wind Transmitter
This unique wireless 1.35m (4'5") mast head unit with transmitter lifts the wind sensor into clearer air. This enables it to provide highly accurate figures for TWS and TWA by reducing errors from disturbed windflow around the mast head and dramatically reduces upwash when sailing downwind, giving you accurate data for performance funtions. Easily fitted with the mast in place. Calibration can be done at any Micronet display. Features:
|
|
Yamaha Command-Link Plus Cable
The Yamaha Link Cable is connected between the NMEA2000 (DeviceNet) connector of the ECI-100, and the available socket on the Yamaha Command-Link or Command-Link Plus hub. |
RotaVecta Wind Transducer
Supplied w/20M (65') Cable Compatible Models:
|
RealVision 3D Transducer Extension Cable - 3M(10') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. |
RealVision 3D Transducer Extension Cable - 5M(16') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. |
RealVision 3D Transducer Extension Cable - 8M(26') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. |
T005 Strap Bracket
Features:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |