Shop by Brand: Perko

• Chrome Plated Brass
  
• Dimensions Base: 4" x 3-3/4"
  
• Width Opening: 2-1/2"
  
• Height Opening: 1-5/8"
  
• Screw Size: #6

Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck 

Features:

• 35° Angled Neck
• Black Polymer
• Integral Tank Vent with Flame Arrestor
• No Ground Wire Required
• Flip Top Cap

Specifications:

• For Hose Size: 1-1/2"
• For Vent Size: 5/8"
• Neck Length: 2-7/16 "
• Screw Size: #10

Combination Vented Gas Fill/Tank for 1-1/2" Hose - Straight Neck 

Features:

• Straight Neck
• Black Polymer
• Integral Tank Vent with Flame Arrestor
• No Ground Wire Required
• Flip Top Cap

Specifications:

• For Hose Size: 1-1/2"
• For Vent Size: 5/8"
• Neck Length: 2-7/16 "
• Screw Size: #10

• Black Polymer and Chrome Plated Zinc Alloy Top
  
• Black Polymer Base
  
• Polymer Adapters for Flat or "V" Type Mount, Contains Notch for Through-Base Wiring
  
• Fold-Down Adjustable Angle
  
• 12V (Included)
  
• Pole: 3/4" Diameter Anodized
  
• Screw Size: #8

Cover Bolt Complete Sizes 4 & 5

Cover Bolt Only (Size 4 and 5) for Intake Water Strainer.

Intake Water Strainers are designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis.

Cover Bolt Complete Sizes 6 & 7

Cover Bolt Only (Size 6 and 7) for Intake Water Strainer.

Intake Water Strainers are designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis.

Features:

• Hinged cover bolt with pin, nut and washer for intake water strainers
• Fits 1/2" and 3/4" pipe size units

Cover Bolt Complete Sizes 8, 9 & 10

Cover Bolt Only (Size 8, 9 and 10) for Intake Water Strainer.

Intake Water Strainers are designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis.

• Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base
  
• 3" Duct Thread into Neck, Hose Clamps Not Required

Cupboard Bolt - 2-1/8" x 1-1/2"

Features:

• Chrome Plated Zinc Alloy
• Black Polymer Slide and Knob

• Chrome Plated Zinc Alloy Flange
  
• Black Plastic Body
  
• Black Plastic Cap w/ Strap
  
• Grounding Screw Included
  
• Cap Retainer and Gasket
  
• Locking Cap has a cover for the key hole

• for Hose Size: 1-1/2"
  
• O.D. Flange: 3-3/8"
  
• Length of Neck: 3-1/8"
  
• Mounting Hole Dia.: 2-1/8"
  
• Screw Size: #8

Door Button w/Spring

Features:

• Chrome Plated Zinc Alloy
• Black Polymer Button
• Supplied with Phosphor Bronze Tension Spring

Double Contact Bayonet Socket

Features:

• Brass with Wire Leads

Double Contact Bayonet Socket - Black Polymer w/10" Pigtail

Features:

• Black Polymer Body
• 10" Pigtail

• Nominal Voltage: 12V
  
• Wattage: 10W
  
• Amps: .74A
  
• Bulb Diameter: 3/8"
  
• Bulb Length: 1-11/16"

• Nominal Voltage: 12V
  
• Wattage: 10W
  
• Amps: .80A
  
• Bulb Diameter: 3/8"
  
• Bulb Length: 1-1/8"

• Nominal Voltage: 12V
  
• Wattage: 15W
  
• Amps: .97A
  
• Bulb Diameter: 9/16"
  
• Bulb Length: 1-11/16"

• Nominal Voltage: 24V
  
• Wattage: 10W
  
• Amps: .40A
  
• Bulb Diameter: 3/8"
  
• Bulb Length: 1-1/8"

Dual Battery Selector Switch - Cup Mount

The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected.

Features:

• For two or more batteries
• Unique oval shape mounts in a round hole
• Removable actuator key

Dual Battery Switch w/Mounting Ring & Legs - Bulkhead Mount

The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected.

Four switch positions: Both "Off", Both "On", Battery 1 "On"/Battery 2 "Off", Battery 1 "Off"/Battery 2 "On"

Materials & Finish

• Red polycarbonate polymer body
• Black polymer actuator key
• Nickel plated terminals

Features

• For two or more batteries
• Unique oval shape mounts in a round hole
• Removable actuator key

Technical Information

• Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
• For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
• Ignition Protected
• Face Dimensions: 3-7/8" x 3-1/4"

• Plain Plated Zinc Alloy
  
• Black Polymer Bearings
  
• For Use with Fig. 1227, 1262 or 1267 Rowlock Horns
  
• Screw Size #10

Eye Strap - 5/16" I.D.

Features:

• Chrome Plated Zinc Alloy

• Chrome Plated Zinc Alloy
  
• The eye is to be permanently attached to the fender line

• Chrome Plated Zinc Alloy Flange
  
• Angled Flush Mount (Approximately 65°)
  
• Anodized Aluminum Tube
  
• Soft Black Liner
  
• Flange Gasket with Integral Flip-Up Cap
  
• D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose

• Mount Type: Angled
  
• Drain Bib: No
  
• I.D. Tube: 1-5/8"
  
• O.D. Tube: 2"
  
• Length Under Flange: 8"
  
• Flange: 4-1/4" x 3-1/2"

• "Reduced Glare" Design
  
• Black Polymer Top with Clear Fluted Lens and Frosted Globe
  
• Fixed Mount Black Polymer Base
  
• Bulb: 12 Volt (Included)
  
• Base Dimensions: 1" x 2-5/8"
  
• Pole: 3/4" Diameter Anodized
  
• Screw Size: #8

• Fixed Mount
  
• Black Polymer and Chrome Plated Zinc Alloy Top
  
• Black Polymer Base
  
• 3/4" Diameter Anodized Aluminum Tube
  
• Bulb: 12V (Included)
  
• Pole: 3/4" Dia. Anodized
  
• Base Dimensions : 1" x 2-5/8"
  
• Screw Size: #8

Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Adjustable Cam Bar

Features:

• Black Polymer
• Chrome Plated Zinc Alloy
• Stainless Steel Stem and Lock Nut
• Detents Indicate Open or Closed Position
• Installs in a 2" Diameter Hole
• For Door Thickness 1/4" to 1-1/8"

Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Cam Bar & Flexible Polymer Strike

Features:

• Black Polymer
• Chrome Plated Zinc Alloy
• Stainless Steel Stem and Lock Nut
• Detents Indicate Open or Closed Position
• Installs in a 2" Diameter Hole
• For Door Thickness 1/4" to 1-1/8"

• White plastic and chrome plated zinc alloy
  
• Offset cam bar
  
• For surface thickness: 1/8" to 3/4" (0.3cm to 1.9cm)
  
• Face plate O.D.:3" (7.6cm)
  
• Installs in 2-1/2" (6.4cm) Diameter Hole