Shop by Brand: Perko

• Length: 2-3/8"
  
• Width: 7/8"
  
• Depth: 1"
  
• Screw Size: #10

White Flip Top Cap Fills for 1-1/2" Hose - White

Features:

• White Polymer
• Integral Tank Vent with Flame Arrestor
• No Ground Wire Required
• EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve
• These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. Control of Diurnal Emissions From Non-road Spark-Ignition Engines and Equipment.

Specifications:

• For Hose Size: 1-1/2"
• For Vent Hose: 5/8"
• Neck Length: 2-7/16"
• Screw Size: #10
• 35° Angled Neck

• Plain or Chrome Plated Zinc Alloy
  
• Black Polymer Bearings
  
• For Use with Fig. 1227, 1262 or 1267 Rowlock Horns
  
• Screw Size #10

Single Battery Disconnect Switch - Cup Mount

The Perko Single Battery Disconnect Switch permits the battery to be shut off from the electrical system when the vessel is not in use. They can also serve as an emergency main disconnect switch in the event of an electrical problem.

The Single Battery Disconnect Switch is Ignition Protected.

Materials & Finish

• Red polycarbonate polymer body
• Black polymer actuator key
• Nickel plated terminals

Features

• Small compact size
• Unique oval shape mounts in a round hole
• Removable actuator key adds additional security

Technical Information 

• Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
• Cup Mount Installation Hole Size: 3"
• For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
• Ignition Protected
• Face Dimensions: 3" x 2-1/2

Single Battery Disconnect Switch w/Mounting Ring & Legs - Bulkhead Mount

The Perko Single Battery Disconnect Switch permits the battery to be shut off from the electrical system when the vessel is not in use. They can also serve as an emergency main disconnect switch in the event of an electrical problem.

The Single Battery Disconnect Switch is Ignition Protected.

Materials & Finish

• Red polycarbonate polymer body
• Black polymer actuator key
• Nickel plated terminals

Features

• Small compact size
• Unique oval shape mounts in a round hole
• Removable actuator key adds additional security

Technical Information

• Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
• For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
• Ignition Protected
• Face Dimensions: 3" x 2-1/2"

Skene Bow Chocks

Features:

• Chrome Plated Zinc Alloy
  • Port and Starboard Pair
  • Max Rope Size: 1/2"
  • Length Overall: 3-1/2"
  • Width: 7/8"

Spare Actuator Key f/8521 Battery Selector Switch

• 1209 - Stow-A-Way Plug-In Type Pole (White All-Round Pole Light & Base Combination)
  
• 1311 - Telescoping Type Pole (White All-Round Pole Light & Base Combination)
  
• 1330 - Stow-A-Way Plug-In Type Pole (White All-Round Pole Light & Base Combination)
  
• 0455 - Fixed Mount White All-Round Light
  
• 0466 - Fixed Mount White All-Round Light
  
• 0362 - Fixed Mount White All-Round Light
  
• 0371 - Fixed Mount White All-Round Light

Spare Waste Cap with O-Ring

Features:

• Black Polymer Cap

Spring Clamps 1" - 1-3/4" - Pair

Features:

• Stainless Steel
• Minimum I.D.: 1"
• Max I.D.: 1-3/4"
• Projection: 2-1/4"
• Width Clamp: 5/8"

Spring Clamps 5/8" - 1-1/4" - Pair

Features:

• Stainless Steel
• Minimum I.D.: 5/8"
• Max I.D.: 1-1/4"
• Projection: 1-1/2"
• Width Clamp: 1/2"

• Chrome Plated Zinc Alloy
  
• Black Polymer Finishing Flange
  
• Spring Loaded, Can be mounted Horizontally or Vertically

Stainless Steel Boat Hook Holders - Pair

Features:

• Stainless Steel
• Max Pole O.D.: 1-1/2"
• Length: 3-1/2"
• Width: 1"
• Screw Size: #6

Stainless Steel Clamshell Ventilator 1-5/8" x 1-1/2"

Features:

• Polished Stainless Steel
• 1-5/8" x 1-1/2"
• Screw Size: 4

Stainless Steel Clamshell Ventilator 2" x 2"

Features:

• Polished Stainless Steel
• 2" x 2"
• Screw Size: 6

• "Reduced Glare" Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Fixed Mount Black Plastic Base
  
• 12v L.E.D.
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 1" x 2-5/8"
  
• Vertical Height: 4-1/2"

• "Reduced Glare" Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Fixed Mount Black Plastic Base
  
• 12v L.E.D.
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 1" x 2-5/8"
  
• Vertical Height: 7-1/8"

• Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring
  
• Fold-Down, Adjustable Angle
  
• Reduced Glare Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Chrome Plated Zinc Alloy Base
  
• Quick Release Lever
  
• Graduated Adjustment Increments
  
• Designed for use on Pontoon Boat Square Rails
  
• Vertical Height: 13-3/8"
  
• 12v
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 2-1/4" x 5/8"

• Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring
  
• Fold-Down, Adjustable Angle
  
• Reduced Glare Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Black Plastic Base
  
• Vertical Height: 13-3/8"
  
• 12v
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 2" x 1-1/2"

• Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring
  
• Fold-Down, Adjustable Angle
  
• Reduced Glare Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Black Plastic Base
  
• Vertical Height: 13-3/8"
  
• 12v
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 2-1/4" x 5/8"

• Stainless Steel Cover
  
• Horizontal Mount
  
• Ultra Low Profile

• Uses 10% of the Energy Draw of Standard Lights
  
• Low Heat and Long Life

• "Reduced Glare" Design
  
• Black Plastic Top with Clear Fluted Lens & Frosted Globe
  
• Fold-Down, Adjustable Angle
  
• 12v L.E.D.
  
• Pole: 3/4" Diameter Anodized
  
• Base Dimensions: 1" x 2-5/8"
  
• Vertical Height: 6-3/4"

• Black Plastic
  
• 3/4 Inch Diameter Anodized Aluminum Tube
  
• 2 Collars - Threaded and Locking
  
• 2 Screw Positions
  
• Wide 40° Adjustable Head
  
• Gold Plated Contacts
  
• 12v L.E.D.

• Black Plastic
  
• 3/4 Inch Diameter Anodized Aluminum Tube
  
• 2 Collars - Threaded and Locking
  
• 2 Screw Positions
  
• Wide 40° Adjustable Head
  
• Gold Plated Contacts
  
• 12v L.E.D.

• Black Plastic
  
• 3/4 Inch Diameter Anodized Aluminum Tube
  
• 2 Collars - Threaded and Locking
  
• 2 Screw Positions
  
• Wide 40° Adjustable Head
  
• Gold Plated Contacts

• Black Plastic
  
• 3/4 Inch Diameter Anodized Aluminum Tube
  
• 2 Collars - Threaded and Locking
  
• 2 Screw Positions
  
• Wide 40° Adjustable Head
  
• Gold Plated Contacts

• 2 Mile Range
  
• Stainless Steel Housing
  
• 3/4" Diameter Anodized Aluminum Tube
  
• Stow-A-Way Plug-In Type Pole
  
• Requires 2-Pin Mounting Base
  
• Pole Length: 12"
  
• 12V
  
• Pole Rake: 0°
  
• Small Threaded Collar

• Certified For Use on Power Driven Vessels
  
• Under 12M (39.4 ft.) in Length
  CONSTRUCTION:
  
• Stainless Steel
  
• Ultra Low Profile
  L.E.D. Features
  
• Uses 10% of the Energy Draw of Standard Lights
  
• Low Heat & Long Life

• Polymer body
  
• T Handle
  
• Stainless Steel Stem
  
• Lock with 2 keys
  
• Offset cam bar
  
• Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
  
• The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward)
  
• The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion

• Face Plate Diameter: 3"
  
• Body Color: Black
  
• Handle Color: Chrome
  
• Adjustment Cam Bar Inches: 3/4 - 2-3/8"