Shop by Brand: Perko

• 2-Pin
  
• Plug-In Type Base
  
• 5° Rake

• Stainless Steel
  
• Black Plastic
  
• Water Resistant Slide Cover
  
• Pigtail Leads

• 2-Pin
  
• Plug-In Type Base
  
• 0° Rake

• Stainless Steel
  
• Black Plastic
  
• Water Resistant Slide Cover
  
• Pigtail Leads

• Black Polymer
  
• Pre-wired double contact bayonet socket and 3' of 16/3-SO cable
  
• Watertight access cap for rebulbing and cleaning
  
• Bulb: 12, 24, 32 or 120 Volt (bulb not included)
  
• Height overall: 7-1/2"
  
• Height Lens: 4-1/2"
  
• Screw Size: #1/4"

• Black Plastic with Stainless Steel Mounting Bracket
  
• Bulb Included
  
• Certified for use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length.
  
• 3 Miles Visibility
  
• 12VDC

• Ignition Protected
  
• For use with 12, 24 and 32 Volt Marine Electrical Systems
  
• Capacity - 250 Amps Continuous & 360 Amps Intermittent
  
• When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running

• For use with 6 two 50 Volt Marine Electrical Systems
  
• Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
  
• When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running

• Diameter: 5-1/4"
  
• Depth: 2-5/8"

Medium Duty Battery Selector Switch w/Key Lock

Perko's 8501 Series battery selector switches are among the most popular battery switches ever produced. Their use of the traditional Perko bolt circle makes for easy installation, whether new or as a replacement. These switches can be mounted in numerous locations. And as ignition protected switches, they can be installed in the engine rooms of gasoline powered boats.

In addition to doing everything a battery disconnect switch does, battery selector switches permit battery selection (of two or more batteries) for specific purposes including starting engines, running accessories or even recharging. They allow for the use of one or more batteries in systems with one or more engines and facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.

Perko battery switches are designed for surface mounting. Standard duty switches have a bright red polycarbonate housing for safety with a large easy-to-turn black knob. The housing of the heavy duty switches are red fiber-reinforced polycarbonate. Selector switches are designed with a "make before break" feature. This allows switching between the "1", the "ALL" and the "2" positions while the engine is running. Models with an "Alternator Field Disconnect" feature offer protection for Non-Unitized Alternators should the switch accidentally be turned to the "OFF" position with the engine running.

Versions of the 8501 Series switches offer additional features such as alternator disconnect and key lock security.

The 90° rotation feature allows users to feel the switches' position in no light situations and the classic shape of the knob makes it easy to turn.

High conductivity studs are long enough to handle more than 1 cable and strong enough for torque needed for secure connections. Optional spacer ring (PN 0462DP0RED) allows for the use of larger cables.

Specifications:

• Diameter: 5-1/4"
• Depth: 2-5/8"
• For use with 6 to 50 Volt Marine Electrical Systems
• Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
• When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running

• Plain Black Cap Insert and Waterproof Snap-On Cover
  
• Black Plastic Base
  
• Pigtail Leads

• Chrome Plated Brass Insert and Waterproof Snap-On Cover
  
• Black Plastic Base
  
• Pigtail Leads

Mortise Latch Set with Turn Button 

Features:

• Chrome Plated Zinc Alloy
  • Turn Button Lock
  • Bevel can be Reversed During Installation

Specifications:

• Door Thickness: 1" - 1-3/8"
• Escutcheon Dimensions
• Screw Size: 6

Mortise Lock Set with Bolt

Features:

• Chrome Plated Zinc Alloy
• Locks by Turn Bottom from Inside or Key from Outside
• Bevel Can be Reversed During Installation

Specifications:

• Door Thickness: 1" - 1-3/8"
• Escutcheon Dimensions: 4-3/8" x 1-1/4"
• Screw Size: 6

Plug-In Mount Combination Masthead/White All-Round Light - 12V

Certified For Use on Sail or Power Driven Vessels Under 20M (65.6') in Length 

Features:

• Black Polymer and Chrome Plated Zinc Alloy Top
  • Chrome Plated Brass Base
  • Waterproof Cover for Base that Attaches to Deck Mounted Retainer when Light is in Place
  • Stow-A-Way Plug-In Type

Specifications:

• Bulb: 12 Volt (Not Included)
• Pole Rake: 16°
• Pole: 3/4" Dia. Anodized
• Collar: Threaded
• Screw Size: #8
• Base Dimensions: 3-3/8" x 2-1/4"

Pole Storage Clips - Black - Pair

Features:

• Soft Black U.V. Stabilized
  • Fits 3/4 or 7/8 Inch Diameter Tubing
  • Also Available in Camo Line (Dealer Package Only)

Specifications:

• Pole O.D. Size: 3/4"
• Dimensions: 3/4" x 2-1/4" x 1-5/8"
• Screw Size: #10 P.H.

• Plain black cap, chrome plated zinc alloy
  
• Black polymer base
  
• Pigtail leads
  
• Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights

• Number of Pins: 2
  
• Base Dimensions: 3-3/4" x 1-5/8"
  
• Tube Angle: 16°
  
• Screw Size: 8

Removable Bi-Color Pole & Utility Light - Black

Certified For Use on Power Driven Vessels Under 20M (65.6') in Length

Features:

• Black Polymer Top and Collar with Red and Green Lenses
  • 3/4" Diameter Anodized Aluminum Tube
  • Deck Illuminating Utility Light
  • Stow-A-Way Plug-in Type Pole
  • Requires 3 Pin Mounting Base

Specifications:

• 12 Volt Bulb (Included)
• Locking Collar
• Pole Rake: 0°
• Fits Bases: 1045 & 1047 (3-Pin)

Replacement Combination Masthead/All-Round Light without Base - White

Features:

• Replacement
• Combination Light
• Masthead/All-Round
• Color: White

Replacement Drain Plug for 0124000PLB

Cast Bronze Drain Plug

Rod Holder Cap & Gasket Kit

Features:

• Soft Black Flange Gasket with Integral Flip-Up Cap
  • Soft Black Lip
  • Replacement or Upgrade for Older Holders

• Chrome Plated
  
• The Cover Has a Hook for Hanging Chain and Stainless Steel Cable Retainer

• Chrome Plated Zinc Alloy

• Chrome plated zinc alloy
  
• Face Plate O.D.: 2"
  
• Screw Size: 6