SC29 Radar Guard for M92722 for Use In Combination with Raymarine Quantum Radar Polished stainless steel guards protect radome from damage and reduce wear on the sails. Features:
|
Product Code SC50
Two counter rotating angled discs compensate for slopes on radar arches and cabin roofs. Provides a horizontal mounting surface for satcom domes on any slope angled from 0 12 degrees. Use only in conjunction with the Scanstrut SC45 and SC65 satcom adaptor ranges. Supplied complete with watertight deck seal. Also four pairs of 6° angled washers to enable perpendicular fastening through SC50 on any slope from 0 -12 degrees. Target Market Power boats requiring level installation of satcom domes. Technical information Materials Discs and washers machined from white King Starboard®, a marine grade polymer. Expanded polyethylene base seal. Size 200mm/7.8" diameter Satcom compatibility Suitable for use with Scanstrut SC45 and SC65 adaptor plates, allowing installation of KVH G4 and G6 domes and Simrad TV 45 and TV 65 domes. |
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice of antenna position and a quick and easy installation.
These high quality installations guarantee maximum performance from your satcom antenna. Features:
Materials:
|
Scanpod Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments. Options available to install a 7" display or standard instrument. Arm Mounted:
|
Scanpod Deck Pod Uncut for 10" to 12" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments:
Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available. |
Scanpod Deck Pod Uncut for 9" Displays Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. For Displays and Standard Instruments:
Features: SWIVEL & TILT BASE One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position. BEST VIEWING ANGLE An adjustable ball joint allows range of movement and multiple mounting angles. ADDED STRENGTH Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. OVERHEAD MOUNTING Deck Pod models can be overhead mounted. Refer to part number guide for compatibility. HASSLE FREE INSTALL & SERVICE Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. INCREASED PROTECTION Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. SUPPLIED UNCUT As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available. |
Scanpod Helm Pod 3 Instrument Uncut - White With great features, the Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the Helm Pod is the right choice for you. For Displays & Standard Instruments:
Features:
|
Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White Specifications:
Scanpod Range The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats Features:
|
Scanpod Single Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments. Options available to install a 7" display or standard instrument. Arm Mounted:
|
Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" Rails Features:
|
Scanpod Slim Deck Pod - f/10" to 12" Display - White Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features:
|
Scanpod Slim Deck Pod - Up to 8" Display Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features:
|
New Small Deck Seal - For connectors up to 21 mm (0.83"). Cables from 4-9 mm (0.165"-0.35"). Complete Kit including fixings and seals.
Material: Plastic |
New Small Deck Seal - for connectors up to 21mm (0.83"). Cables from 9-14mm (0.35"-0.55"). Complete kit includes fixings and seals.
Material: Plastic |
New Small Deck Seal - For connectors up to 21mm (0.83"). Cables from 4-9mm (0.165"-0.35"). Complete kit includes fixings and seals.
Material: Stainless Steel |
New Small Deck Seal - For connectors up to 21mm (0.83"). Cables from 9-14mm (0.35"-0.55"). Complete kit includes fixings and seals.
Material: Stainless Steel |
T-Bar
For GPS/VHF Antenna The T-Bar can hold up to four GPS/VHF antennas, and can easily be installed onto pushpit rails and decks to provide the perfect installation solution for power and sail boat owners looking for the secure and neat storage of antennas. Features:
|
Waterproof USB Dual Charge Socket (12-24V)
Waterproof on-board charging, whatever the weather. Dual socket will connect and charge devices including phones, tablets, fish finders, chart plotters and more. Perfect for kayaks, RIBs, sail and powerboats of any size. Features: Universal
Waterproof Charging
Marine Ready
Great Design
Retrofit
Technical Information:
|
WD-OPNARY-01 4° Base Wedge f/Direct Mounting with Open Array
Enhance the performance of your radome or open array with the Scanstrut 4° radar base wedge. A tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with radars from: Garmin, Lowrance, Raymarine, Furuno, JRC, Simrad and many more. |
WD-RAD-01 4° Base Wedge for Direct Mounting with Radome Mount
Enhance the power of your radome or open array with the Scantrut 4° radar base wedge. A tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with radomes from: Furuno, Garmin, Raymarine, Simrad, B&G, Lowrance and more. |
Wireless Phone Receiver Patch - Lightning Designed and engineered by the outdoor technologies experts Scanstrut, the new ROKK wireless charging receiver patches are wireless charge ready! Simply plug the Lightning charge patch into your phones charging port, place on the back of the phone and then clip on your phone case over the top. Your phone is now ready to be charged by any of the 12/24V ROKK wireless charger range or any other Qi-certified charging product. Convert non-wireless charging enabled iPhone models for wireless charge. Features:
|
Wireless Phone Receiver Patch - Micro USB Designed and engineered by the outdoor technologies experts Scanstrut, the new ROKK wireless charging receiver patches are wireless charge ready! Simply plug the Mirco USB charge patch into your phones charging port, place on the back of the phone and then clip on your phone case over the top. Your phone is now ready to be charged by any of the 12/24V ROKK wireless charger range or any other Qi-certified charging product. Convert non-wireless charging enabled micro USB chargeable phones to wireless charger compatible. Features:
|
Radome Plate 1 for Raymarine, Garmin, B&G, Lowrance Domes The modular Dual PowerTower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Features:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |