Central Antenna Bar - 1" x 14" TPI Thread
Central Accessory Bar with Easy-Fit Mount Sytem for Fast Installation Features:
*Only to be use with the APT-150-01 / APT-250-01 |
Central Bar & Wing PLate f/2 Antenna & 1 NavLight
Central Accessory Bar with Easy-Fit Mount Sytem for Fast Installation Features:
|
Central Light Bar - Black Black Scanstrut APT-250-01-BLK 250mm (10”) Aluminium PowerTower for 2kW/4Kw Raymarine: Garmin and Navico BR24/3G/4G radomes FOR RADOMES AND SMALL SATCOM/TV ANTENNA
FEATURES: CHOICE OF HEIGHTS
EASE OF INSTALL
FEATURES OF THE POWERTOWER RANGE:
|
Central Lightbar
Central Accessory Bar with Easy-Fit Mount Sytem for Fast Installation Features:
|
Central Lightbar for Up to 45cm Domes The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation. Features:
Compatible Devices:
|
Dual PowerTower® Strut - Open Array The Modular Dual PowerTower® has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications:
|
Dual PowerTower® Strut - Radome The Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications:
|
Horizontal Deck Seal - .08"-.24"Glass Filled Nylon - Fully Waterproof
Features:
|
New Large Deck Seal - For connectors up to 40mm (1.57"). Cables from 12-15mm (0.47"-0.59"). Complete kit includes fixings and seals.
Material: Plastic |
New Large Deck Seal - For connectors up to 40mm (1.57"). Cables from 12-15mm (0.47"-0.59"). Complete kit including fixings and seals.
Material: Stainless Steel |
Lightbar for Forward Leaning All Aluminum PowerTower Accessories are fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable and gloss white finish. Specifications:
|
GPS / VHF Antenna Mount for Self Levelling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. Features
Materials
|
Self Levelling Radar Mount - Mast
Compatible Units
Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features
Materials
Kit includes
|
Self Levelling Radar Mount - Mast
Compatible Units
Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features
Materials
Kit includes
|
Mast Mounts
Compatible Units:
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts. Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation. Features
Materials
Kit includes
|
Mast Mount Adapter Kit
Compatible With
For masts with an integral track at the front which makes it difficult to fit a Scanstrut Mast Mount. Features
Materials
Kit includes
|
New Medium Deck Seal - for connectors up to 40mm (1.57"). Cables from 12-15mm (0.47"-0.59"). Complete kit including fixings and seals.
Material: Plastic |
New Medium Deck Seal - For connectors up to 30mm (1.18"). Cables from 9-14mm (0.35"-0.55"). Complete kit includes fixings and seals.
Material: Stainless Steel |
Micro Deck Seal - .08"-.24"Glass Filled Nylon - Fully Waterproof
Features:
|
New Mini Deck Seal - For connectors up to 16mm (0.63"). Cables from 2-8mm (0.08"-0.35"). Complete kit including fixings and seals.
Material: Plastic. |
New Mini Deck Seal - For connectors up to 16mm (0.63"). Cables from 2-8mm (0.08"-0.35"). Complete kit includes fixings and seals.
Material: Stainless Steel |
Modular Dual PowerTower Strut - Compact Domes Only The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation. Features:
|
Deck Seals are designed to enable easy installation of electronics on board, providing a neat and stylish way of passing cables through the decks. The Multi Deck Seal is the latest addition to Scanstrut's existing Deck Seal range, which launched earlier this year and has passed stringent IPX6 and IPX7 tests to ensure protection from water ingress, even during extreme weather conditions and heavy seas.
The durable Multi Deck Seal has been designed to fit multiple cables up to 15mm in diameter and is designed to save space and installation time. Unlike Scanstrut's current Deck Seal range, the new Multi Deck Seal comes un-drilled to ensure a selection of cables can be fitted. The installation process is simple and reliable, requiring a small hole to be drilled through the seal. Manufactured using marine grade aluminium with a hard finish to resist impact marks, the Multi Deck Seal unit has a waterproof base seal and an aesthetic low profile to prevent those on board from stubbing their toes. |
Open Array Plate 1 for all Open Array Radars The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.
|
PowerTower 10" Aluminum 2kW/4kW Raymarine, Garmin, Navico Aft Lean - Black Black Scanstrut APT-250-01-BLK 250mm (10”) Aluminium PowerTower for 2kW/4Kw Raymarine: Garmin and Navico BR24/3G/4G radomes FOR RADOMES AND SMALL SATCOM/TV ANTENNA
FEATURES:
EASE OF INSTALL
FEATURES OF THE POWERTOWER RANGE:
|
PowerTower® 10" Aluminum Forward Leaning 2kW/4kW for Raymarine, Garmin & Navico BR24, 3G & 4G For Radomes, Open Array and Small SatCom/TV Antenna Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance. Features:
Features of the PowerTower® Range:
|
PowerTower® 6" Aluminum 2kW/4kW Raymarine, Garmin & Navico BR24/3G/4G - Forward Leaning For Radomes, Open Array & Small Satcom/TV Antenna Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance. Features: Choice of Heights: 150mm (6”) for low level clearance of smaller obstacles or 250mm (10”) for greater clearance and increased radar horizon. Ease of Install: Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts. Additional Features:
|
PowerTower 6" Aluminum 2kW/4kW Raymarine, Garmin, Navico BR24/3G/4G Radomes Aft Lean - Black Black Scanstrut APT-150-01-BLK 150mm (6”) Aluminium PowerTower for 2kW/4Kw Raymarine: Garmin and Navico BR24/3G/4G radomes FOR RADOMES AND SMALL SATCOM/TV ANTENNA
FEATURES:
EASE OF INSTALL
FEATURES OF THE POWERTOWER RANGE:
|
Benefits
Designed to provide a level horizon for your radar when your boat is bows up and on the plane, maximizing the performance of your antenna. Simple to install and supplied with our excellent pre-fitted watertight base seal, our base wedges can be stacked on top of one another to compensate for greater trim angles. Part numbers PT3010 - Made from marine grade polymer. Fits below all Composite and Aluminium PowerTower bases |
Radome Plate 2 for Furuno Domes Specifically for Radome plate 2 (Furuno radomes) |
Rail Mount
GPS/VHF RAIL ACCESSORY The Rail Mount is the perfect solution for those wishing to attach a single antenna to a pushpit rail. Features:
|
Rail Mounted Pod Compact - Up to 8" Displays Rail Mounted Pod for 8” Displays or Standard Instruments Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. Features: Added Strength Inner bracing plate secures the Deck base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration. Hassle Free Install & Service Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection Pod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available. Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your display onto standard and curved rails. Great Viewing Options Viewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |