Shop by Brand: Johnson Pump

Rapid Rogue Ballast Pump Impeller Kit

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced. 

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Rogue Ballast Pump Impeller Kit

A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.

Service Kit F4B-8 -9

Johnson Pump Service Kit specifically for F4B-8 and F4B-9.

Service Kit F6B-9

Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Service Kit F7B-8/-5001/-9

Pump Type: F7B

Threaded Blue Insert for 61121 & 61122

Threaded blue insert for single outlet, single flush & Double outlet, 2-way flush.

Thru-Hull - 1-1/2" - White

Thru-Hull assembly, 1-1/2", White

Thru-Hull Nut Aerator - Straight/90°

Specifications:

• Thru-Hull
• Straight/90°
• Nut Aerator

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH
  
• Capacity straight (13.6 V): 38 l/min - 600 GPH
  
• Amperage: 2.5 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH
  
• Capacity straight (13.6 V): 51 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

• No moving parts
  
• Totally sealed solid state electronics and field detectors
  
• No mercury
  
• No exposed sensors eliminate corrosion possibilities
  
• Unique 3-way switch disables piezo alarm while keeping warning LED lit
  
• Environmentally sensitive
  

Washer F5B, F6B & F7B

Johnson Pump washer specifically for F5B, F6B and F7B.