AirV 4-550 Flex Mount - 12V Designed for engine compartment ventilation prior to engine start-up. AirV heavy duty blowers are designed for continuous duty and can therefore be used for air intake or extraction in bilges, galleys, accommodation and other compartments. |
Aqua Jet Water Pressure Systems - 4.0GPM - 12V
The five chamber Aqua Jet WPS-series provides a reliable heart for small boat and recreational vehicle water pressure systems. Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics. It is recommended to install the WPS-pumps with an accumulator tank. Always use a PUMProtector inlet strainer before the pump intake. Diaphragm: Santoprene Valves EPDM Body: Nylon/Polypropylene Motor: 100W Pressure Cut Off:2.8 bar - 41psi Fuze Size: 10 A Connection:3/8" NPT/hose 1/2", 1/2"NPT/Hose 3/4", 1/2" NPT, 3/4" Hose Weight: 2 kg /4.5lbs Length: 236,5 mm/9.31" Width: 210 mm/8.25" Height: 116 mm/4.575" |
Aqua Jet Water Pressure Systems - 5.2GPM - 12V
The five chamber Aqua Jet WPS-series provides a reliable heart for small boat and recreational vehicle water pressure systems. Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics. It is recommended to install the WPS-pumps with an accumulator tank. Always use a PUMProtector inlet strainer before the pump intake. Diaphragm: Santoprene Valves EPDM Body: Nylon/Polypropylene Motor: 150W Pressure Cut Off:2.8 bar - 41psi Fuze Size: 15 A Connection:3/8" NPT/hose 1/2", 1/2"NPT/Hose 3/4", 1/2" NPT, 3/4" Hose Weight: 2 kg /4.5lbs Length: 236,5 mm/9.31" Width: 210 mm/8.25" Height: 116 mm/4.575" |
Automatic Switch AS888
For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat! |
Black Basket for 1600 GPH / 2200 GPH Replacement Basket for 1600 GPH & 2200 GPH Pumps |
Black Basket for 4000 GPH Replacement Basket for 4000 GPH Pumps |
Bulkhead Fitting
Part #: 09-10616 Johnson Bulkhead Fitting for 3/4" hose |
Cartridge Combo
Combines the line of cartdrige bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch. Specs:
|
Cartridge Motor - 500GPH - 24V Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Heavy-duty motor with stainless steel shaft for 500 GPH pumps, 24V. Featrues:
|
Cartridge Motor 1250 GPH - 24V Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. |
CM10P7-1 - 12V Circulation Pump Features:
|
CM30P7-1 - 12V - Circulation Pump - Dia16 Features:
|
CM30P7-1 - 12V - Circulation Pump - Dia20 Features:
|
Deck Wash Single Outlet Single Flush 316 SS construction. Connects & disconnects under full pressure. Positive lock bayonet connector. Double Viton O-ring seals. Large flow capacity. 20% nylon 66 connectors. American standard garden hose. Features:
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Dura Port 90 Assembled Port Fitting Features:
|
Electro Magnetic Float Switch
Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at 3/4" water level. Features:
|
Electronic Float Switch 12v
Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at 3/4" water level. 12V. Handles up to 15 amps. |
End Cover F4/F5B Johnson Pump 01-42398 Kit Endcover F4/F5B, Stainless Steel |
End Cover F5B/6B Johnson Pump 01-46535 Kit Endcover F5/F6, Stainless Steel |
F5B-1907 Impeller Pump - 12V - 3/4" NPT For bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc. Features:
|
F6B-9 Impeller Pump OEM HS Crankshaft Crank driven raw water pump. Replaces: Marine Power 524505, Pleasure Craft RA057023, Indmar 665011, Volvo 841640. Johnson Pump 10-24228-1. |
Gasket F5B/F6B-9 Johnson Pump gasket specifically for F5B and F6B-9. |
Heavy Duty Bilge Pump 2200 GPH - 24V Features:
Specifications:
|
Heavy Duty Bilge Pump 4000 GPH - 24V Designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole meter with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design. The impeller is carefully designed and tested to maximize head and flow. Universal base plate and a choice of 1, 1/2" or 2" ports makes for a simple installation. Removable check valve included. Features:
|
Impeller Kit - F75 with Thread Features:
|
Impeller Kit 9-45700R Take good care of the cooling system - change to a new impeller every year! |
Impeller Replacement
A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals. |
PUMProtector Strainer
The PUMProtector inlet and universal strainers feature transparent covers for simple inspection, a wide variety of KlickTite port connectors for simple installation and removal, and high quality materials for simple maintenance. The connectors make it possible to remove the entire unit for thorough cleaning wherever it's most convenient. Materials Strainer - Polyamide 66, black Cover - Acrylic, clear, 01-36012 P02 Screen - Stainless steel, 40 mesh O-rings - Silicone and EPDM Diameter 80 mm / 3.15" Height 60 mm / 2.35" Weight 0.15 kg / 0.33 lbs Mesh size 40 Max Liquid Temp. - +50°C - +120°F Max Temp. for Drinking Water - +30°C - +85°F KlickTite Connector - Built-in KlickTite 1 x 1/2" hose / 3/8" NPT, 1 x 3/4" hose / 1/2" NPT |
Intake Filter - Round - Plasic Features:
|
KlickTite 2 x 90 - 3/4" Hose Allows draining of the system quickly and effortlessly. |
Low Boy Bilge Pump
Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or I/O engines. Removable cartridge style. Max length: 146 mm - 5.75" Width: 81 mm - 3.2" Height: 72 mm - 2.82" Wire size: 1.3 mm2 - 16 GA |
Low Boy Bilge Pump - 750 GPH - 12V Low Boy Bilge Pump Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or Input and Output engines. Removable cartridge style. For 750 GPH Low Boy Bilge pumps we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. Included both a straight and a smooth elbow Dura-Port as well as a removable check valve. Features:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |