Furuno Retainer Ring w/Trackball
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Retrofit Kit f/10.4" VX2 to TZTL12F
Retrofit Kit to go from 10.4" VX2 to TZTL12F WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
FAP6112
Rudder Reference Unit for the Furuno NAVpilot Series of Autopilots. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Side Scan Transom Mount for TZT3 The 225T-TM904 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD. Features:
Specifications:
|
Furuno DT-800MSF - Airmar B617V Housing Style Transducer
Designed with Airmar's exclusive Broadband Ceramic Technology, the DT-800MSF's 235 kHz element improves resolution without sacrificing sensitivity. The higher power rating 100W RMS provides spot-on depth readings in as little as 0.45M (1.4') of water and can reach depths up to 180M (600') Standard Features:
Weight: 1.5kg (3.4lb) Acoustic Window: Urethane Data Update Rate: 1 per second Minimum Sounding Depth: 0.5M (1.6') Maximum Sounding Depth: 180M (590) Pressure Rating: 3M (10') Pulse Rate: 20,000 p/nm* (5.6 Hz per knot) Smart Sensor Supply Voltage at 100% Sound Power Output: 10 VDC to 25 VDC Supply Current: 40 mA Standard Cable Length: 6M NMEA 2000® Load Equivalency Number (LEN): 4 *p/nm = pulses per nautical mile WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Snap-On Front Cover
Furuno's Snap-On Front Cover is specifically for the 10" VX2 Displays, RDP149, 1824C and 1834C. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency Features:
|
Thru-Hull Multibeam Transducer f/DDF3D
The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Thru-Hull Side-Scan Transducer 12-Pin for TZtouch3 12, 16 & 19 Models The 225T-SS904 is a Thru-Hull transducer that works with the built-in Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD. Features:
|
TM150M Medium CHIRP Transom Mount Transducer As Chirp continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. New to the market are the B150M and TM150M, economical Chirp transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution. Features:
Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
TM185HW High Wide CHIRP Transducer with Temp Transom Mount High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket Features:
|
TM185M Medium-Frequency CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket Features:
|
TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3 The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers. The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency. Features:
|
Furuno Trackball Assembly f/VX2
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
MB1100
The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail cable assembly. |
Transom Mount Multi-Beam Transducer The 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Wind Transducer with 30M Cable Elegant, Accurate & Affordable The FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system. Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |