Shop by Brand: Furuno

Transducer Extension Cable, 10-Pin(M) to 10-Pin(f), 4 meters

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adapter Cable, 8-Pin Transducer to 10-Pin Sounder

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transducer Pigtail, 10-Pin(F), 2 Meters

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Analog - NMEA2000 Converter

This unit converts analog data from an external sensor to the CAN bus format data.

Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)

The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation.

A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or helm pumps. As the steering wheel (helm pump) is turned in the port direction, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed into the port side of the steering cylinder. As the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump through the starboard hydraulic lines.

One end of the cylinder is fixed and the other is connected to a tiller arm, which is connected to a rudder shaft. With this connection to the tiller arm the linear movement of the cylinder to port is changed to rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction with oil being pumped out of the starboard line and returning through the port line.

If more than one helm pump is used, a return/fill line must be installed to connect the cases of all helm pumps together.

The output flow rate of the pumpset determines the speed of the steering cylinder. The PUMPHRP17-12 outputs 1.6 cu. in. of oil per second and requires a 12VDC input.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B150M Bronze Thru-Hull Chirp Transducer - Med Frequency - 0°

Features:

• Frequency: Chirp 95-155 kHz
• Power Rating: 300W
• Connector: 10 Pin
• Tilt: 0 Degree
• Deadrise of Hull: 0-7 degrees

B175HW CHIRP Bronze Thru-Hull 12° Tilt 1kW - 10-Pin Connector

High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 12° Tilt.

Features:

• Power: 1kW
• Function: Depth,Temperature
• Frequency: 150-250 kHz
• Mount Style: Thru-Hull, Flush, 12 Degree Tilt
• Housing Material: Bronze
• 10-Pin Connector

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175HW Chirp Bronze Thru-Hull 20° Tilt 1kW - 10-Pin Connector

High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 20° Tilt.

Features:

• Power: 1kW
• Function: Depth,Temperature
• Frequency: 150-250 kHz
• Mount Style: Thru-Hull, Flush, 20 Degree Tilt
• Housing Material: Bronze

B175M Bronze Thru-Hull 12° Tilt - Med Frequency

Features:

• Frequency: Chirp 85-135 kHz
• Power Rating: 1KW
• Connector: 10 Pin
• Tilt: 12 Degree
• Deadrise of Hull: 8-15 Degrees

B175M Bronze Thru-Hull 20° Tilt - Med Frequency

Features:

• Frequency: Chirp 85-135 kHz
• Power Rating: 1KW
• Connector: 10 Pin
• Tilt: 20 Degree
• Deadrise of Hull: 16-24 Degrees

B265LH Bronze Thru-Hull CHIRP Transducer - 12-Pin

Bronze, Thru-Hull CHIRP Transducer with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.

The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP broadband Fish Finders. The B265LH comes complete with high-speed fairing block

Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.

The B265LH CHIRPS across the following bandwidths: 

• Low-Frequency: 42-65 kHz
• High-Frequency: 130-210 kHz

B265LH(Low & High-Frequency)

• Depth & fast-response water-temperature sensor
  
• Low-CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth
  
• High-CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth
  
• 103 kHz of total bandwidth from one transducer
  
• Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
  
• Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
  
• Bronze transducer housing with High-Performance Fairing
  
• Boat Size: 8M (25') and above
  
• Hull Type: Fiberglass or wood

CHIRP TECHNOLOGY

• 5 to 10 times greater detail and resolution
  
• 10 to 1,000 times more energy on targets
  
• Accuracy down to 3,000M (10,000')
  
• Precise separation between baitfish and game fish
  
• Superior performance in noisy environments
  
• Improved bottom tracking at high boat speeds

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin

Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.

The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.

The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.

B60 Tilted Element™ 12°

12° titled version is designed for 8° - 15° deadrise angles

The bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.

Features:

• Depth/Temp
  
• 50/200 kHz
  
• 600w RMS
  
• Mid-performance
  
• Bronze

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B60 Tilted Element™ 20° Furuno 10 pin connector

20° titled version is designed for 16° - 24° deadrise angles


The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.

Features:

• Depth/Temp
  
• 50/200 kHz
  
• 600w RMS
  
• Mid-performance
  
• Bronze

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B75M Bronze Thru-Hull 0° Tilt - Med Frequency

Features:

• Frequency: Chirp 80-130 kHz
• Power Rating: 600W
• Connector: 10 Pin
• Tilt: 0 Degree
• Deadrise of Hull: 0-7 degrees

Bracket for TZTL15F

An optional Bracket for Furuno's TZTL15F.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bracket with Knobs for TZT16F

TZT16F Furuno Bracket with Knobs.

Bronze Thru-Hull Transducer w/ Temp, 600w (8-Pin)

• 600 Watts
  
• 50/200 kHz
  
• 45/15 degree Beam Angles
  
• Bronze Thru-Hull with Temperature
  
• 30 Foot Cable with 8-Pin Connector

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bronze Thru-Hull Transducer, 600w (10-Pin)

• 600 Watts
  
• 50/200 kHz
  
• 46/10 degree Beam Angles
  
• Bronze Thru-Hull
  
• 8-Meter Cable with 10-Pin Connector

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rubber Coated Transducer, 1kW (No Plug)

• 1 kW
  
• 200 kHz
  
• 8,5 degree Beam Angle
  
• 5.5 lbs.
  
• Rubber Coated - Chest, Housing or Tank Mounted
  
• 10-Meter Cable, no connector provided

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rubber Coated Transducer, 1kW (No Plug)

• 1 kW
  
• 50 kHz
  
• 28 degree Beam Angle
  
• 6.6 lbs.
  
• Rubber Coated - Chest, Housing or Tank Mounted
  
• 15-Meter Cable, no connector provided
  
• May be used for 75 kHz frequency setting feature, available only in FCV1100/1200 and FCV1200BB

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cover for RD33

Furuno's white, snap-on, display cover to protect the unit from sun and debris. Specifically made for Furuno's RD33 4.3" navigational data organizer.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

White Snap on cover for MFD12 Units

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DRS Signal/Power Cable - 15M

Furuno's DRS Signal/Power Cable, 15 Meter. 

The FCV-295 is a new color digital sounder designed for a variety of professional fishing operations. It features a bonded "fogging-free" 10.4" LCD display providing superior viewing even in direct sunlight. You can display echoes in 8, 16, or 64 colors, with color assignment dependent on the strength of the returned echo.

The FURUNO Free Synthesizer (FFS) Transceiver allows a wide selection of operating frequencies. You may choose any two frequencies between 28 and 200 kHz to fit your fishing operation. Output power is selectable from 1, 2 or 3 kW. A wide variety of display modes and functions are available, which provide skippers with simple and intuitive information.

Furuno Digital Filter (FDF)
FURUNO digital filter optimizes the gain to obtain highly defined images of underwater conditions. The FCV-295 can clearly show target fish close to the seabed.The digital filter also eliminates noise to deliver sharp and detailed echo presentation, achieving detection of fishing reef and even individual fish with absolute clarity.

Operating Frequency Adjustment
When FURUNO transducers are connected and set to the FCV-295, the operating frequency range will be registered and shown in the menu. The user can shift the operating frequency freely between the ranges at any time from the menu. With the FURUNO 82B-35R transducer, the operator can select any operating frequency from 66 to 109 kHz. This feature is particularly useful for vessels targeting many different species, or when the fish finders of other ships in the area cause interference.

Faster Transmission Rate For Detailed Detection
The rate of transmission is increased by more than 30% compared to conventional fish finders. As the result, more detailed information about underwater conditions can be gained through the same sounding interval. With the FCV-295's AUTO transmission function, the rate is automatically raised in shallow waters and lowered in deep waters, which provides for detailed detection of seabed targets.

Standard Features:

• 10.4" 'Fogging-Free' color LCD provides clear view in any weather conditions
  
• Post-processing gain control applies to all existing returns on the display
  
• White Edge function trace the bottom contour with a thin white line
  
• FURUNO Digital Filter delivers crystal clear target presentation
  
• FURUNO Free Synthesizer transceiver allows adjustable operating frequency

Furuno FCV588 8.4" Color Fishfinder w/ Rezboost

The 8.4" FCV588 is a dual-frequency fish finder equipped with revolutionary new RezBoostT signal processing technology that increases resolution and improves target separation by up to 8x, utilizing a compact narrowband transducer. It offers improved clarity and resolution previously impossible with conventional narrowband transducers. A fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range), ensuring excellent target separation and clarity.

The FCV588 includes a White Line feature to easily and accurately discriminate fish lying near the bottom. The top edge of the bottom echo is displayed in white to clearly show bottom structures. This feature helps to discriminate between weeds and bottom fish.

The FCV588 also offers a number of unique features only found on Furuno Fish Finders. ACCU-FISHT is a unique fish size analyzer based on the latest digital technology. Accu-Fish allows the FCV588 to display the actual fish size on individual fish echoes on-screen. When used concurrently with Fish Marks, Accu-Fish is a great help in identifying fish targets on the display. Alternatively, Accu-Fish can display the actual depth of the fish target instead of fish size.

Bottom Discrimination provides an at-a-glance recognition of bottom composition with four types of graphical displays (Rocks/Sand/Gravel/Mud) when connected to a supported thru-hull or transom mount transducer.

Configurable Alarm function (depth, fish echoes, etc.)

Furuno's TLL (Target Lat/Lon) output allows you to share and display information on a chart plotter. Easily interface the FCV588 with your Furuno Chart Plotter so that you can mark fishing grounds with various information (L/L, Depth, Water Temp, Fish size and Bottom type).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FCV628 5.7" Color Fishfinder with RezBoost

The 5.7" FCV628 is a dual-frequency fish finder equipped with revolutionary new RezBoostT signal processing technology that increases resolution and improves target separation by up to 8x, utilizing a compact narrowband transducer. It offers improved clarity and resolution previously impossible with conventional narrowband transducers. A fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range), ensuring excellent target separation and clarity.

The FCV628 includes a White Line feature to easily and accurately discriminate fish lying near the bottom. The top edge of the bottom echo is displayed in white to clearly show bottom structures. This feature helps to discriminate between weeds and bottom fish.

The FCV628 also offers a number of unique features only found on Furuno Fish Finders. ACCU-FISH is a unique fish size analyzer based on the latest digital technology. Accu-Fish allows the FCV628 to display the actual fish size on individual fish echoes on-screen. When used concurrently with Fish Marks, Accu-Fish is a great help in identifying fish targets on the display. Alternatively, Accu-Fish can display the actual depth of the fish target instead of fish size.

Bottom Discrimination provides an at-a-glance recognition of bottom composition with four types of graphical displays (Rocks/Sand/Gravel/Mud) when connected to a supported thru-hull or transom mount transducer.

The FCV628 comes equipped with a number of configurable Alarm functions such as depth and fish echo alerts.

Furuno's TLL (Target Lat/Lon) output allows you to share and display information on a chart plotter. Easily interface the FCV628 with your Furuno Chart Plotter so that you can mark fishing grounds with various information (L/L, Depth, Water Temp, Fish size and Bottom type).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FI5001

The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.

Important Note: The FI5001 Sensor does not come with a cable as standard. Please select a 30 meter or 50 meter cable kit when ordering the FI5001 Wind Sensor.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1871F 7" GPS/Chartplotter/Fishfinder 50/200, 600W, 1kW, Single Channel & CHIRP

Powerful technology in a compact 7" Chartplotter with a built-in CHIRP Fishfinder!

Multi-Touch Interface - Convenient and intuitive slide-out menus

The GP-1871F smart interface, inherited from the NavNet TZtouch2, features slide-out menus containing all the tools and data you need to be in total control.

Display modes customization

Customize your display modes and create the perfect combination to fit your individual needs.

Finger Gestures

With the Finger Gestures (one or two fingers) you can either zoom-in, zoom-out, double tap to take a screenshot or even jump to a full-screen mode when using Split-screen display mode. 

Detailed Chart with C-MAP 4D compatibility

By using the incredibly rich C-MAP 4D charts, the GP-1871F/1971F delivers highly precise data that features plenty of useful information, such as relief vectors, tidal streams and marine plans, considerably enhancing your navigational awareness.

Autopilot controls

Via the CAN bus network interface, The NAVpilot-300 and NAVpilot-711C can be connected to the GP-1871F and GP-1971F and controlled directly from the Chart Plotter. 

Unmatched detail with TruEcho CHIRP™

The high level of detail available with TruEcho CHIRP™ technology helps to distinguish fish schools, even when close to the sea bed.

Fish can be observed with a very high resolution and are displayed in a distinct boomerang shape. The clear presentation marks individual game fish and bait fish, even when tightly schooled together.

ACCU-FISH™ and Bottom Discrimination with RezBoost™

With FURUNO’s RezBoost™ data processing technology, fish schools and echoes are shown with high resolution while you can assess fish size and bottom composition thanks to ACCU-FISH™ and Bottom Discrimination functions.

Additionnaly, ACCU-FISH™ icons and colors can be freely customized according to the size and depth of the targeted fish. 

DRS4W 1st Watch Wireless Radar

The GP-1871F and GP-1971F are connectable to the 1st Watch Wireless Radar (Output Power 4 kW) giving your Chart Plotter a major upgrade in accuracy and safety.

Easy screenshot and MicroSD card

Tap the display with two fingers to capture a screenshot that will be saved directly to your microSD card.

Features:

• Consistent "all-glass" design and GUI (similar to TZtouch2), with multi touch, slide out menus and edge-swipe gesture controls
• 7" Wide-aspect, bright (1000 cd), multi touch LCD (800 x 480 Resolution) with anti-fingerprint and anti-reflective coating
• Built-In 1kW TruEcho CHIRP and Conventional Fish Finder with Accu-Fish, RezBoost and Bottom Discrimination
• Built-In 72 channel GPS WAAS, EGNOS, MSAS Core and antenna
• Built-In wireless for use with DRS4W Radar & C-MAP C-Weather downloads
• Radar overlay capability with DRS4W (optional heading input required)
• Compatible with C-MAP 4D MicroSD Worldwide Cartographic Database
• C-MAP C-Weather for Wind, Wave, Weather, Humidity and Temperature
• Autopilot control when integrated w/NavPilot 711C or NavPilot 300
• Certified NMEA2000/NMEA0183 Interface (full NMEA0183 output with SW update)
• Accepts AIS data in both NMEA0183 & NMEA2000 formats

• Built-In simulation: Internal demo slideshow and simulation mode

GP1971F 9" GPS/Chartplotter/Fishfinder 50/200, 600W, 1kW, Single Channel & CHIRP

Powerful technology in a compact 9" Chartplotter with a built-in CHIRP Fishfinder!

Multi-Touch Interface - Convenient and intuitive slide-out menus

The GP-1971F smart interface, inherited from the NavNet TZtouch2, features slide-out menus containing all the tools and data you need to be in total control.

Display modes customization

Customize your display modes and create the perfect combination to fit your individual needs.

Finger Gestures

With the Finger Gestures (one or two fingers) you can either zoom-in, zoom-out, double tap to take a screenshot or even jump to a full-screen mode when using Split-screen display mode. 

Detailed Chart with C-MAP 4D compatibility

By using the incredibly rich C-MAP 4D charts, the GP-1871F/1971F delivers highly precise data that features plenty of useful information, such as relief vectors, tidal streams and marine plans, considerably enhancing your navigational awareness.

Autopilot controls

Via the CAN bus network interface, The NAVpilot-300 and NAVpilot-711C can be connected to the GP-1871F and GP-1971F and controlled directly from the Chart Plotter. 

Unmatched detail with TruEcho CHIRP™

The high level of detail available with TruEcho CHIRP™ technology helps to distinguish fish schools, even when close to the sea bed.

Fish can be observed with a very high resolution and are displayed in a distinct boomerang shape. The clear presentation marks individual game fish and bait fish, even when tightly schooled together.

ACCU-FISH™ and Bottom Discrimination with RezBoost™

With FURUNO’s RezBoost™ data processing technology, fish schools and echoes are shown with high resolution while you can assess fish size and bottom composition thanks to ACCU-FISH™ and Bottom Discrimination functions.

Additionnaly, ACCU-FISH™ icons and colors can be freely customized according to the size and depth of the targeted fish. 

DRS4W 1st Watch Wireless Radar

The GP-1871F and GP-1971F are connectable to the 1st Watch Wireless Radar (Output Power 4 kW) giving your Chart Plotter a major upgrade in accuracy and safety.

Easy screenshot and MicroSD card

Tap the display with two fingers to capture a screenshot that will be saved directly to your microSD card.

Features:

• Consistent "all-glass" design and GUI (similar to TZtouch2), with multi touch, slide out menus and edge-swipe gesture controls
• 9" Wide-aspect, bright (1000 cd), multi touch LCD (800 x 480 Resolution) with anti-fingerprint and anti-reflective coating
• Built-In 1kW TruEcho CHIRP and Conventional Fish Finder with Accu-Fish, RezBoost and Bottom Discrimination
• Built-In 72 channel GPS WAAS, EGNOS, MSAS Core and antenna
• Built-In wireless for use with DRS4W Radar & C-MAP C-Weather downloads
• Radar overlay capability with DRS4W (optional heading input required)
• Compatible with C-MAP 4D MicroSD Worldwide Cartographic Database
• C-MAP C-Weather for Wind, Wave, Weather, Humidity and Temperature
• Autopilot control when integrated w/NavPilot 711C or NavPilot 300
• Certified NMEA2000/NMEA0183 Interface (full NMEA0183 output with SW update)
• Accepts AIS data in both NMEA0183 & NMEA2000 formats

• Built-In simulation: Internal demo slideshow and simulation mode