Chesapeake White SS 2" Voltmeter (10-16 VDC) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N VP9158 |
Chesapeake White SS 2" Water Temperature Gauge (100-250°F) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. A temperature gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N GP9178 |
Chesapeake White SS 4" Speedometer - 60MPH (GPS) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash. GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today. Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the digital LCD. Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation. Benefits:
4"- Hole Size: 3.375" (85mm) Specifications:
Factory P/N SGP003 |
Chesapeake White SS 4" Speedometer - 60MPH (Mechanical) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic speedometers operate by capturing pulses produced by a sensor. the pulses are then electronically converted to a speed reading very much like a tachometer converts ignition pulses to RPM. Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism. ∗ Pitot tube sold separately. 4" - Hole Size: 3.375" (85mm) Specifications:
Factory P/N SE9521 |
Chesapeake White SS 4" Speedometer - 80MPH (Mechanical) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic speedometers operate by capturing pulses produced by a sensor. the pulses are then electronically converted to a speed reading very much like a tachometer converts ignition pulses to RPM. Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism. ∗ Pitot tube sold separately. 4" - Hole Size: 3.375" (85mm) Specifications:
Factory P/N SE9522 |
Chesapeake White SS 4" Tachometer - 4,000 RPM (Diesel - Magnetic Pick-Up) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9733 |
Chesapeake White SS 4" Tachometer - 4,000 RPM (Diesel - Mechanical Takeoff & Var Ratio Alt) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9128 |
Chesapeake White SS 4" Tachometer - 6,000 RPM (Gas - Inboard & I/O) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct postion you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9796 |
Chesapeake White SS 4" Tachometer - 7,000 RPM (Gas - All Outboards) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct postion you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9002 |
Chesapeake White SS 4" Tachometer with Hourmeter - 6,000 RPM (Gas - Inboard) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Technical Specifications:
Factory P/N TC9128 |
Chesapeake White SS 4" Tachometer with Hourmeter - 7,000 RPM (Gas - Outboard) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Technical Specifications:
Factory P/N TCH008 |
Chesapeake White SS 4" Tachometer with Suzuki Monitor - 7000 RPM (Gas - Suzuki Outboard) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine. SystemCheck® Warnings:
4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC4025 |
Chesapeake White SS 4" Tachometer w/Systemcheck Indicator - 7,000 RPM (Gas - Johnson/Evinrude Outboard) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine. SystemCheck® Warnings:
4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9881 |
Chesapeake White SS Boxed Set - Inboard Motors Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install. Inboard Motors Boxed Set Includes:
Factory P/N KTF001 |
Chesapeake WHite SS Boxed Set - Outboard Motors Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens. Packaged and ready for the display counter. This 4 Gauge Boxed Sets offer a complete set of gauges ready to install. Outboard Motors Boxed Set Includes
Factory P/N KTF002 |
Chesapeake White with Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Volt, Water Temperature & Oil PSI Packaged and ready for the display counter. These Boxed Sets offer a complete set of gauges ready to install. Boxed Set Includes:
|
Chesepeake Black SS 4" Studded Speedometer - 60MPH (GPS) Hole Size: 4" The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash. Benefits:
|
Dress White 2" Depth Sounder with In-Hull Mounted Transducer Perimeter-lighted white dial with bold black graphics, white aluminum bezel and flat glass lens. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists. Depth Sounder includes a Faria SN2010 in-hull mount transducer w/20' cable. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N DS0114 |
Dress White 2" Depth Sounder with Transom Mount Transducer Perimeter-lighted white dial with bold black graphics, white aluminum bezel and flat glass lens. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists. Comes with Faria SN2011 transom mount transducer w/25' cable. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N DS0114 |
Dress White 2" Fuel Level Gauge (E-1/2-F) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N GP9389 |
2" Fuel Level Gauge (E-1/2-F) Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens. Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N GP9722 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. |
Dress White 2" Oil Pressure Gauge (80 PSI) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications:
Factory P/N GP9573 |
Dress White 2" Trim Gauge (Johnson/Evinrude/Suzuki Outboard) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types:
Specifications:
Factory P/N GP9711 |
2" Trim Gauge (Mercury / Mariner / Mercruiser / Volvo DP / Yamaha-2001 and newer) - Dress White Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types:
Specifications:
Factory P/N GP9712 |
Dress White 2" Voltmeter (10-16 VDC) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N VP9139 |
Dress White 2" Water Temperature Gauge (100-250°F) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature. 2" - Hole Size: 2.0625" (53mm) Specifications:
Factory P/N GP9120 |
Dress White 4" Speedometer - 55MPH (Mechanical) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic speedometers operate by capturing pulses produced by a sensor. the pulses are then electronically converted to a speed reading very much like a tachometer converts ignition pulses to RPM. Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism. ∗ Pitot tube sold separately. 4" - Hole Size: 3.375" (85mm) Specifications:
Factory P/N SE9475 |
Dress White 4" Speedometer - 80MPH (Mechanical) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic speedometers operate by capturing pulses produced by a sensor. the pulses are then electronically converted to a speed reading very much like a tachometer converts ignition pulses to RPM. Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism. ∗ Pitot tube sold separately. 4" - Hole Size: 3.375" (85mm) Specifications:
Factory P/N SE9476 |
Dress White 4" Tachometer - 6,000 RPM (Gas - Inboard & I/O) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9691 |
Dress White 4" Tachometer - 7,000 RPM (Gas - All Outboards) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Factory P/N TC9038 |
Dress White 4" Tachometer with Hourmeter - 6,000 RPM (Gas - Inboard) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Technical Specifications:
Factory P/N TC9124 |
Dress White 4" Tachometer with Hourmeter - 7,000 RPM (Gas - Outboard) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications:
Technical Specifications:
Factory P/N TCH013 |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |