Secure Removable Chafe Guard - White (Pair)
Chafe protection is critical at the dock, at anchor, or on a mooring. The Chafe Guard is a good solution to prevent chafing over a cleat, cap rail, where two lines cross or at the anchor roller. Dock lines can be expensive; extending their life with good chafe protection is not. Removable Chafe Guards fit 3/8" to 7/8" line (10 mm to 23 mm). Great for anchor lines or mooring pennants, where chafing through a line could cost you the boat. Velcro® brand hook fasteners on the inside of the guard grip the line securely; no need for additional strings or ties. Easily reposition when dock lines stretch and chafe protection needs to moved. Made of nylon. Sold by the pair. Each chafe guard is 16" long (40 cm). |
Sensor Mounting Shelf
For mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite. Compatible with both original Vantage Pro and Vantage Pro2. |
AnchorSnubber
20" Long Eases the tension on the anchor chain, rode or snubber line. Eliminates chain noise and shock loads to chain, anchor roller, windlass, cleats. |
DockShockle
Designed for smaller, lighter boats up to 40'. DockShockle is 16" Long. Includes two special mini-LineGrabbers for quick and easy attachment. |
FenderFriend
A reliable way to keep your boat fenders in place. Nylon buckle for swift, secure attachment without complicated knots. FenderFriend stretches to avoid shock to your rails, stanchions, life lines or cleats. |
FenderFriend
A reliable way to keep your boat fenders in place. Nylon buckle for swift, secure attachment without complicated knots. FenderFriend stretches to avoid shock to your rails, stanchions, life lines or cleats. |
LineGrabber
Add a strong, instant attachment point with a simple Prusik knot to any line up to 1". LineGrabbers are 9" long with spliced and sewn loops at each end. Made of UV resistant composite fiber line. |
Shockles LineSnubber
20" Long Eliminates shock loads on dock lines, towing lines, tie-downs and preventers. Progressive tension design with internal stretch limiter. |
Shockles LineSnubber
20" Long Eliminates shock loads on dock lines, towing lines, tie-downs and preventers. Progressive tension design with internal stretch limiter. |
MiniShockle
12" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord. |
MiniShockle
18" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord. |
MiniShockle
24" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord. |
Snap Tool Multi-Key
A deck plate with attitude!
Perfect for:
|
Soil Moisture Sensor, Vantage Pro® and Vantage Pro2
Watermark® soil moisture sensor uses electrical resistance to measure the moisture level of the soil. Does not require periodic maintenance during the growing season. Simply bury at the desired depth, then monitor moisture levels throughout the season. Add up to 4 sensors to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6M) cable. Compatible with Vantage Pro and Vantage Pro2. The Soil Moisture Sensor must be connected via a Leaf & Soil Moisture/Temperature Station (#6345). |
Solar Radiation Sensor
For use with Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.)Measures solar radiation and is required (along with an anemometer and a temperature/humidity sensor) if you wish to monitor evapotranspiration. Diffuser element and housing are carefully designed for accurate cosine response. Silicon photo diode provides good match to solar spectrum. Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust. Includes built-in level and 2' (0.6M) cable. Compatible with both original Vantage Pro and Vantage Pro2. You may also need a UV Sensor (#6490) and Sensor Mounting Shelf (#6673). |
Extra Spar-Fly Vane
|
Spare Vane Only f/Windex 10.Sport
|
Spare Vane Only f/Windex 15
|
Stainless Steel Temperature Probe w/Two-Wire Termination
Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station. Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable. Compatible with both original Vantage Pro and Vantage Pro2. |
Stainless Steel Temperature Probe w/RJ Connector
Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station. Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable. Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332). |
Wireless Repeater with Solar Power
For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery. Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations. Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro. |
Super Quick Fist Clamp
Super Quick Fist is ideal for holding fire extinguishers, oxygen cylinders, CO2 tanks, and other equipment. Mounts easily with three #10 (5 mm) bolts or screws (not included). Can be mounted with strap facing any direction. Specifications:
Typical uses:
|
Swim Stirrup
Part #: 1466 The Swim Stirrup provides safe, easy access to small boats for swimmers or water skiers. Durable, reliable design attaches to gunwales, transoms or open bows. Features:
|
Telescoping Paddle/Boat Hook Combination
Our Paddle/Boat Hook combination is great to have on board and at the launch ramp. The bright orange paddle end doubles as a signaling device. Made tough for years of hard use. Adjusts from 32" to 5' 6" (80 to 170 cm) 2 sections: 1" and 11/8" (25 and 29 mm) tube diameter |
Telo-Cat
Designed especially for catamarans, the Davis Telo-Cat is durable and highly visible. Installs on the headstay bridle in seconds; easily removed for trailering (no tools required). Comes complete with high visibility 8" (20cm) vane, adjustable tacking arms, and mounting hardware to fit most catamarans. Made of high impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing system for extreme accuracy in light or heavy weather. Can take the abuse of catamaran sailing. Includes complete mounting instructions for the following catamarans:
|
Temperature Probe with RJ Connector
Used to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable. Compatible with Weather Envoy, Envoy8X, and Anemometor/Sensor Transmitter Kit. |
Temperature/Humidity Sensor w/Radiation Shield
Features both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources of radiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable. |
Tiller-Tamer
Maintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered. |
Universal Masthead Mount
Extend your Windex 10.Sport or Windex 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation. Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with Windex Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included) |
USB Power Cord f/Vantage Vue®, Vantage Pro2™ & Weather Envoy For Use With:
|
UV Sensor
Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose. Multi-layer filter provides a spectral response that closely matches the Erythema Action Spectrum. Diffuser provides excellent cosine response. Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust. Includes built-in level and 2' (0.6M) cable. Compatible with both original Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.) You may also need a Solar Sensor (#6450) and Sensor Mounting Shelf (#6673). |
Vantage Vue® Wireless Integrated Sensor Suite
The innovative ISS combines a rain collector, temperature/humidity sensors, and anemometer/direction vane into a single unit for optimum performance and durability. Mounting hardware included; mounting pole sold separately. The fully-integrated, corrosion-proof sensor suite is built to take all the weather your location can give. The ISS combines a rain collector, temperature/humidity sensors, and anemometer/direction vane into a single unit for optimum performance and durability. The smaller profile sensor suite is designed to minimize visual impact in your yard or on your roof. Wireless Frequency-hopping spread spectrum radio ensures consistent transmission up to 1,000' (300M) from integrated sensor suite to console. Rain Collector Self-emptying tipping spoon measures rain with .01" (0,2 mm) resolution. Anemometer Vantage Vue records wind speeds as low as 2 mph (3 km/h) and as high as 180 mph (290 km/h). Weather Proof Cover Corrosion-resistant cover provides durability in extreme conditions. Electronics are potted or over-molded for added moisture shielding. Radiation Shield Provides excellent protection from solar radiation and other sources of radiated and reflected heat. Temperature/Relative Humidity Provides outside temperature readings from -40°F to 150°F (-40°C to 65°C). Also measures relative humidity from 0 to 100%. Easy Installation Installs easily and quickly with included mounting hardware kit. Wind Direction Measures wind direction in compass points or degrees. Solar Panel Energizes the station during the day. On-board super capacitor provides power at night. Lithium battery provides backup when needed. Bubble Level Allows for more accurate installation and better data collection. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |