Shop by Brand: Attwood Marine

• Coolers corners stay put with straps to prevent injury, boat and cooler damage
  
• Quick disconnect strap design
  
• Corrosion proof
  
• Fastens with #8 screws

Cowl Ventilator

Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.

For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.

Installation Hole Size: 3-1/4" to 3-1/2"

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deck Fill for Carbon Canister System - Angled Body & Scalloped Black Plastic Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. 

Features:

• All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
• Fits 1-1/2 (inch) fill hose
• Compatible with Ethanol blended fuels
• Designed and tested to prevent water from entering the fuel system
• Deck Fill for Carbon Canister System, angled, black composite
• EPA / CARB Certified
• Dual 1 psi overpressure relief safety valves built into the deck fill caps
• Automatic nozzle shutoff 4-18 gpm

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. 

Features:

• All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
• Fits 1-1/2 (inch) fill hose
• Compatible with Ethanol blended fuels
• Designed and tested to prevent water from entering the fuel system
• Automatic nozzle shutoff 4-18 gpm
• Dual 1 psi overpressure relief safety valves built into the deck fill caps
• EPA / CARB Certified
• Deck Fill for Carbon Canister System, angled, chrome finish

Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.

Features:

• Fits 1-1/2 (inch) fill hose
• Compatible with Ethanol blended fuels
• Designed and tested to prevent water from entering the fuel system
• All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
• EPA / CARB Certified
• Dual 1 psi overpressure relief safety valves built into the deck fill caps
• Automatic nozzle shutoff 4-18 gpm
• Deck Fill for Carbon Canister System, angled, stainless steel, single pack

Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. 

Features:

• All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
• Fits 1-1/2 (inch) fill hose
• Designed and tested to prevent water from entering the fuel system
• Compatible with Ethanol blended fuels
• Chrome finish
• Automatic nozzle shutoff 4-18 gpm
• Dual 1 psi overpressure relief safety valves built into the deck fill caps
• EPA / CARB Certified

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. 

Features:

• All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
• Fits 1-1/2 (inch) fill hose
• Designed and tested to prevent water from entering the fuel system
• Compatible with Ethanol blended fuels
• Stainless Steel finish
• EPA / CARB Certified
• Dual 1 psi overpressure relief safety valves built into the deck fill caps
• Automatic nozzle shutoff 4-18 gpm

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.

Features:

• Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
• Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
• Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
• Automatic nozzle shutoff 4-18 gpm
• Stainless Steel finish
• An essential component of VaporTec and SecureStop
• Designed and tested to prevent water from entering the fuel system
• EPA / CARB Certified
• Hinged audible click cap meets EPA requirements
• Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards

*Compatible with Ethanol blended fuels

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.

Features:

• Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
• Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
• Automatic nozzle shutoff 4-18 gpm
• Stainless Steel finish
• An essential component of VaporTec and SecureStop
• Designed and tested to prevent water from entering the fuel system
• EPA / CARB Certified
• Hinged audible click cap meets EPA requirements
• Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards

*Compatible with Ethanol blended fuels

Deck Fill Replacement Cap & Chain

This Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. 

Features:

• Cap is attached by a stainless steel beaded chain

Specifications (Cap and Chain are Fitted for This Deck Fill Size):

• 3-1/4 (inch) Fill Neck Length
• 1-7/8 (inch) installation hole size
• 3-inch flange size
• Fits 1-1/2 (inch) I.D. Hose

*Key sold separately

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap

Attwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.

Features:

• Sold as a single unit
• Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
• Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
• Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
• Automatic nozzle shutoff 4-18 gpm
• Black Composite finish
• An essential component of VaporTec and SecureStop
• Designed and tested to prevent water from entering the fuel system
• EPA / CARB Certified
• Hinged audible click cap meets EPA requirements
• Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards

*Compatible with Ethanol blended fuels

Deck Mounted Seat Slide

Swivl-Eze has the boating experience to deliver all the kinds of accessories you want.

Features:

• Seating accessories for retrofitting and improving
• Adapters to change a post installation or swivel location
• Mounts directly to the boat deck
• 1-5/8" total height
• Constructed of strong aluminum
• Convenient front control operation
• For use on stamped and welded seat mounts or cast seat mounts not originally equipped with slider

Drop-In Hidden Horn w/ Black and White Covers

Low profile drop in horn with grills. Design allows easy installation. Easily retrofitted. Comes with black and white cover. 12V. Designed for ABYC standards for boats up to 20 meters.

Fender Cleat - 3-1/2"

The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation. 

• Total Length: 3-1/2"
  
• Total Width: 1-3/16"
  
• Above deck-lowered/closed): 9/16" 
  
• Above deck- raised/open: 1-3/8"
  
• Maximum Line Opening (adjusting heights): 3/4"
• Install Depth: 1-7/8"
• Mounting Hole Distance: 1-11/16"

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Hatch Pull

The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.

• Robust and easy to use
  
• Freshwater and saltwater compatible
  
• Simple, one-piece lens is sealed from water
  
• Concealed, protected wiring at the base
  
• Uses two festoon-style 8W lamps
  
• Typical installation requires (2) #10 stainless steel screws of length suitable for deck or rail material
  
• Will collapse and not break if accidentally hit

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Robust and easy to use
  
• Freshwater and saltwater compatible
  
• Simple, one-piece lens is sealed from water
  
• Concealed, protected wiring at the base
  
• Uses two festoon-style 8W lamps
  
• Typical installation requires (2) #10 stainless steel screws of length suitable for deck or rail material
  
• Will collapse and not break if accidentally hit

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fold-N-Stow Fishing Net - Large

Fold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is large enough to be used in a variety of fishing applications.

Features:

• Constructed of durable, knot-free netting
• A flip of the handle opens and locks the net into place
• Easily pull back the trigger, and the net collapses down into a stowable size

Specifications:

• Size: Large 
• Fully Extended (L x W x D): 81"  x 27" x 27"

Fold-N-Stow Fishing Net - Medium

Fold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is large enough to be used in a variety of fishing applications.

Features:

• Constructed of durable, knot-free netting
• A flip of the handle opens and locks the net into place
• Easily pull back the trigger, and the net collapses down into a stowable size

Specifications:

• Size: Medium
• Fully Extended (L x W x D): 47" x 16" x 16"

Fold-N-Stow Fishing Net - Small

Fold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is ideal for trout fishing. 

Features:

• Constructed of durable, knot-free netting
• A flip of the handle opens and locks the net into place
• Easily pull back the trigger, and the net collapses down into a stowable size

Specifications:

• Size: Small
• Fully Extended (L x W x D): 24" x 12.5" x 10"

Fold-Up Drink Holder - Dual Ring - Black

Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.

Fold-Up Drink Holder - Dual Ring - White

Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.

• Universal sizing for all sit-on-top kayaks
  
• Four adjustable straps for a custom fit
  
• Quick-drying, UV-resistant fabric
  
• Corrosion-resistant hardware
  
• Durable nylon covering

• 12V
  
• 30"
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 12V
  
• 36"
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 12V
  
• 42"
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel/Oil Mixing Bottle

Allows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.

Features:

• Markings to mix oil for 2 Cycle engine
• Convenient wide-mouth, quart-size bottle
• Clear oil level marks in black

Fuel/Water Separator

Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.

Features:

• Double seal for enhanced performance
• Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.