Shop by Brand: Attwood Marine

• Water-resistant bow and stern navigation lights
  
• Attwood's most durable, portable LED navigation light engines
  
• Sealed electronics, built to last in harsh conditions
  
• Sealed, shock-proof composite housing
  
• Shatter-proof polycarbonate lens
  
• 150+ hour run-time on three AAA batteries (not included)
  
• Telescoping poles
  
• Kayak Pad mounting or Screw Down options

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Plastic Thru-Hull Fitting - 1-1/2" - White

These thru-hulls are made with a durable, thermoplastic construction which prevents electrolysis. 

Caution: Thru-Hull connectors are designed for installation above the water line only.

Specifications:

• Fits Hose Size: 1-1/2" I.D.
• Stem Length: 3-1/2"
• Max. Hull Thickness: 1-1/4"
• Flange Diameter: 3"
• Installation Hose Size: 1-7/8" to 2"
• Construction: Polypropylene

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pole Light Storage Clips

New design holds larger-diameter anti-glare pole lights. Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 screw

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank - 12 Gallon with Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.

Features: 

• 12 Gallon fuel capacity
• Compatible with 1/4-inch NPT fuel fittings
  • High-Contrast, easy to read gage
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• UV-grade multi-layer tank material
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Cap with built-in vacuum valve means no need for manual venting
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 22.75"
• Width: (inch) 14.25"
• Height: (inch) 14.47"

*No fuel line included

Portable Fuel Tank - 12 Gallon without Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.

Features: 

• 12 Gallon fuel capacity
• Compatible with 1/4-inch NPT fuel fittings
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• UV-grade multi-layer tank material
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Cap with built-in vacuum valve means no need for manual venting
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 22.75"
• Width: (inch) 14.25"
• Height: (inch) 14.47"

*No gauge or fuel line included

Portable Fuel Tank - 3 Gallon with Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.

Features: 

• 3 Gallon fuel capacity
• Compatible with 1/4-inch NPT fuel fittings
  • High-Contrast, easy to read gage
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• UV-grade multi-layer tank material
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Cap with built-in vacuum valve means no need for manual venting
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 16.6"
• Width: (inch) 11.45"
• Height: (inch) 7.3"

*No fuel line included

Portable Fuel Tank - 3 Gallon without Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.

Features: 

• 3 Gallon fuel capacity
• Compatible with 1/4-inch NPT fuel fittings
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• UV-grade multi-layer tank material
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Cap with built-in vacuum valve means no need for manual venting
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 16.6"
• Width: (inch) 11.45"
• Height: (inch) 7.3"

*No gauge or fuel line included

Portable Fuel Tank - 6 Gallon with Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.

Features:

• 6 Gallon fuel capacity
• Compatible with 1/4" NPT fuel fittings
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• Cap with built-in vacuum valve means no need for manual venting
• High-contrast & easy to read gauge
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 19.82"
• Width: (inch) 13.50"
• Height: (inch) 9.16"

*Fuel line is not included

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank - 6 Gallon without Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. 

Features:

• 6 Gallon fuel capacity
• Compatible with 1/4" NPT fuel fittings
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• Cap with built-in vacuum valve means no need for manual venting
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 19.82"
• Width: (inch) 13.50"
• Height: (inch) 9.16"

*No gauge or fuel line included

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank Cap with Tether - EPA Certified

High-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.

Features:

• Standard 2 ¼ inch neck for convenience
• Includes high-flow automatic vacuum valve
• Tether Included
• Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks
• Easy-to-grip cap features ratcheting noise so you know it’s properly sealed

Portable Low Profile Fuel Tank - 12 Gallon with Gauge

Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.

Features: 

• 12 Gallon fuel capacity
• Compatible with 1/4-inch NPT fuel fittings
  • High-Contrast, easy to read gage
  • Save space; the low profile is 3 inches lower than regular 12-gallon tanks
• Additional oil and ullage/vapor capacity
• EPA Cap with automatic, high-flow vacuum valve
• UV-grade multi-layer tank material
• Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
• Cap with built-in vacuum valve means no need for manual venting
• Meets EPA and CARB (California Air Resources Board) regulations
• Complies with all ABYC/NMMA requirements for portable marine fuel tanks

Dimensions:

• Length: (inch) 24"
• Width: (inch) 18"
• Height: (inch) 11.61"

*No fuel line included

Primer Bulb - 1/4" Inner Diameter Hose

This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.

Features:

• It is intended for use with a 1/4-inch interior diameter hose
• Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
• Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
• This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified

Primer Bulb - 3/8" Inner Diameter Hose

This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.

Features:

• It is intended for use with a 3/8-inch interior diameter hose
• Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
• Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
• This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified

Primer Bulb - 5/16" Inner Diameter Hose

This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.

Features:

• It is intended for use with a 5/16-inch interior diameter hose
• Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
• Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
• This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified

• Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props
  
• Built of durable plastic

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Scupper Valve

Provides a water exit for boats with self-bailing cockpits. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation.)

• Diameter: 2-7/8"
• Use as a replacement valve for 3881 Thru-Transom Scupper

Caution: Thru-Hull connectors are designed for installation above the water line only.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 12-50 volts DC / 200 Amps Continuous / 300 Amps Intermittent / on-off-separate
  
• Ergonomic grips
  
• Removable walls for easy access

Standard Carbon Canister

Carbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.

Features:

• Brackets OEM Installed
• Low permeation shell reduces overall system emissions
• Can be mounted in any orientation using brackets provided
• EPA / CARB Certified
• Fits a 5/8" vent hose

Specifications: 

• Trailerable Vessel Capacity (EPA Rating): 220 Gallon
• Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon
• Trailerable Vessel Capacity (CARB Rating): 176 Gallon
• Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon 

*Compatible with Ethanol blended fuels

• Polished 316 grade stainless steel tube for corrosion-resistance
  
• Gasket Provides water seal around flange
  
• Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
  
• U.V. resistant polymer liner protects finish on rod or reel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Polished 316 grade stainless steel tube for corrosion-resistance
  
• Gasket Provides water seal around flange
  
• Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
  
• U.V. resistant polymer liner protects finish on rod or reel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Polished 316 grade stainless steel tube for corrosion-resistance
  
• Gasket Provides water seal around flange
  
• Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
  
• U.V. resistant polymer liner protects finish on rod or reel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Polished 316 grade stainless steel tube for corrosion-resistance
  
• Gasket Provides water seal around flange
  
• Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
  
• U.V. resistant polymer liner protects finish on rod or reel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 24"
  
• 2-Pin Standard Pole
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 30"
  
• 2-Pin Standard Pole
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 36"
  
• 2-Pin Standard Pole
  
• 2-Mile
  
• 360 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sure-Grip Stainless Steel Rod Holder - 4" & 25-Degree Angle

Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.

Specifications:

• Angle: 25-degrees
• Stem Length: 4 inches with wing nut
• Use for: Drifting or trolling
• Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 45-Degree Angle

Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.

Specifications:

• Angle: 45-degrees
• Stem Length: 4 inches with wing nut
• Use for: Trolling
• Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle

Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.

Specifications:

• Angle: 5-degrees
• Stem Length: 4 inches with wing nut
• Use for: Horizontal rod position
• Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle

Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.

Specifications:

• Angle: 5-degrees
• Stem Length: 8 inches with wing nut
• Use for: Horizontal rod position with added clearance
• Includes: 5071 mounting base

SWIVL-EZE 7x7 Zinc Plated  Steel 3/4" Pin Base

7" x 7" Lock'N-Pin 3/4" Pin Base SP-67739-T is zinc plated steel. It features a threaded bronze bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.

Features:

• 7" x 7" Lock'N-Pin 3/4" Pin Base is a zinc plated steel top plate.
• Works with a threaded pedestal pin and features an acetal bushing for secure fit and durability
• Six bolt or screw attachment (hardware not included)

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.