Shop by Brand: C.E. Smith

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

53696 Rod Safety Ring

Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.  

Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard. 

Features:

• Provides a convenient place to secure rods
• 316L Marine-grade stainless steel
• Quick and easy installation

*Sold as an Individual

• Spool roller supports your boat's keel as it sits on the trailer
  
• Prevents the bow from making contact with your winch
  
• Eases loading and unloading of boat
  
• Helps to absorb road shock while boat is being trailered
  
• Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer
  
• Requires 7/16" fasteners (not included)
  
• Sturdy, 1/8" galvanized steel bracket resists corrosion
  
• Black rubber roller delivers long-lasting performance
  
• Made in USA

• Roller length: 4"
  
• Shaft diameter: 5/8"
  
• Diameter of mounting holes (each): 7/16"
  
• Spacing of mounting holes: 3" apart on center
  
• Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Black TPR
  
• 4-1/2" diameter
  
• 6" Wide
  
• 1/2" shaft
  
• Fits 3" wide center roller bracket

• Blue TPR
  
• 4-1/2" diameter
  
• 6" Wide
  
• 1/2" shaft
  
• Fits 3" wide center roller bracket

• Yellow TPR
  
• 4-1/2" diameter
  
• 6" Wide
  
• 1/2" shaft
  
• Fits 3" wide center roller bracket

• 1/8" thick Galvanized
  
• 5/8" shaft
  
• 1/2" hole slots
  
• 3" hole centers
  
• Replacement part #32151G

• Black natural rubber
  
• 3" Diameter
  
• 4-7/8" wide
  
• 5/8" shaft
  
• Replacement part #29522

• Fits 2" tongue width
  
• 4" black rubber roller
  
• Includes pair of 3/8" bolts

• Black TPR
  
• 5-1/2" diameter
  
• 8" Wide
  
• 1/2" shaft
  
• Fits 4" wide center roller bracket

• Blue TPR
  
• 5-1/2" diameter
  
• 8" Wide
  
• 1/2" shaft
  
• Fits 4" wide center roller bracket

• Yellow TPR
  
• 5-1/2" Diameter
  
• 8" wide
  
• 1/2" shaft
  
• Fits 4" wide center roller bracket

• Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
  
• Supports up to 1500lbs of well distributed weight
  
• Mounting hardware not included
  
• Sold in pairs

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

40" L.E.D. Post Boat Guide-On

Post Guide-Ons allow you to see the location of your trailer when it's underwater. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. For trailer frames up to 3"W x 4 1/4"H. Mounting hardware and wiring included.

Features:

• 40" Total Height
• Adjusts Out to 13" each Side
• Fits Frames up to 3"W x 4-1/4"H
• 1-1/2" sq. 16 ga Pre-Galvanized Steel post
• Extends 18" Into 2" PVC tube for strength
• Sold in pairs

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Fits 3" tongue width
  
• 5" black rubber roller
  
• Includes pair of 3/8" bolts

• 1-1/2" square pre-galvanized uprights, angled out at 75°
  
• 2" x 4" x 60" boards tilt to hug the hull and are covered with high grade marine carpet
  
• Boards are untreated Southern yellow pine
  
• Height of 21" with adjustment out to 13" from frame on each side
  
• Can be mounted on top of frame for extra height
  
• Complete with mounting hardware to fit frames up to 3" wide x 4-1/4" high

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
  
• Supports up to 1500lbs of well distributed weight
  
• Mounting hardware not included
  
• Sold in pairs

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" Deep

The larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.

They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  

A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. 

Technical Specifications:

• Material - 316L Stainless Steel
• Angle - 0°
• Bottom Style - Swivel
• Liner Color - Black
• Inner Diameter - 1-7/8"
• Tube Length - 10-1/2"
• Cap Size (L x W) - 5-1/8" x 4-1/4"
• Hole Size - 2-1/2"

*Sold as an Individual

• 60" Total Height
  
• Adjusts Out to 19" each Side
  
• Fits Frames up to 3"W x 4-1/4"H
  
• 1-1/2" sq. 16 ga Pre-Galvanized Steel post Extends 36" Into 2" PVC tube for strength

• Mounting hardware included
  
• Sold in pairs
  
• Adjusts out to 19" each side
  
• 1-1/2" square. 16 gauge pre-galvanized steel uprights
  
• 2-3/8" diameter white PVC posts

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

60" PVC Post Guide-On w/Unlighted Posts - Black

These Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp.

Features:

• Mounting hardware included
• Sold in pairs
• Adjusts out to 13" each side
• Fits Frames up to 3" W x 4-1/4" H
• 1-1/2" square, 16 gauge pre-galvanized steel uprights
• 39" high
• 2" schedule 40 white PVC posts (2-3/8" actual OD)
• Stands 60" above the trailer frame with Black post caps
• Installation Instructions
• Made in the USA

Fits trailer frames up to 3" wide x 5-1/4" tall

Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.

Pre-Galvanized Steel

Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Mounting hardware included
  
• Sold in pairs
  
• Adjusts out to 19" on each side
  
• Fits frames up to 3"W x 5-1/4" H
  
• 1-1/2" square, 16 gauge pre-galvanized steel uprights, 36" high
  
• 2-3/8" diameter white PVC posts

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Mounting hardware included
  
• Sold in pairs
  
• Adjusts out to 19" each side
  
• Fits frames up to 3" W x 5-1/4" H
  
• 1-1/2" square, 16 gauge pre-galvanized steel uprights
  
• 2-3/8" diameter white PVC posts

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1-1/4" or 1-5/16" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1.66" or 1-1/2" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 7/8" or 1" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.