11" Wide x 12' Long Black Carpet Roll
11" wide covers a 2x4 or a 2x6 board
|
18" Wide x 18' Long Black Carpet Roll
18" wide covers a 3x8 or a 4x8 board
|
11" Wide x 12' Long Blue Carpet Roll
11" wide covers a 2x4 or a 2x6 board
|
11" Wide x 12' Long Grey Carpet Roll
11" wide covers a 2x4 or a 2x6 board
|
18" Wide x 18' Long Grey Carpet Roll
18" wide covers a 3x8 or a 4x8 board
|
Center Swivel Bracket - 2"
Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features:
|
Center Swivel Bracket - 2-1/2"
Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features:
|
Chrome Acorn Wheel Nuts - 1/2"-20 The most commonly used wheel mounting hardware. Packaged 5 per blister pack. |
Double Slot Swivel Bolster Bracket Assembly - 13"
C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G. Features:
|
Double U-Bolt Bolster Bracket - 8-3/4" Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”. |
Drop-in Swivel
Drop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance. Great for:
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
CE Smith Dust Caps - Hub ID 1.980" - (Pair)
Product Description Use this dust cap to protect your axle nut. Features:
WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Black Nylon Rod Holder
55121A Corrosion Free Nylon rod Holder These 30° light duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV resistant Nylon, these rod holders are tough and corrosion free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws(not included) |
White Nylon Rod Holder
55120A Corrosion Free Nylon rod Holder These 30° light duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV resistant Nylon, these rod holders are tough and corrosion free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws(not included) |
FLUSH MOUNT Stainless Steel Rod Holders
Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
FLUSH MOUNT
Stainless Steel Rod Holders
Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
FLUSH MOUNT
Stainless Steel Rod Holders
Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
|
Grease Seals f/1" to 1-1/16" Straight Spindle
Product Description Need to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and provide a tight long lasting seal. Features:
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Heavy Duty Spare Tire Carrier
27310G Get that spare tire out of your way, mount it up on its side and it looks great too. Hot dipped galvanized for lasting protection. Holds either 4 or 5 lug wheels and fits all trailers frames up to 3" wide by 4" high. Extra heavy duty welded steel construction for worry free trailering. Offset height raises tire and provides additional ground clearance. WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Jon Boat Support Bunk & Bracket Assembly
24" carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2" up to 8" above tongue. Includes all mounting hardware for a 2" or 3" wide tongue. Board is covered with high quality, marine grade carpet. Sold individually. WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Knife Plier Rack and Tackle
**Knives, Plier and lures not included** |
LED Post Guide Light Kit
These tough, long lasting, waterproof and shockproof LED post guide lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. One piece lamps fit easily on top of your existing 2" PVC post guide-ons. Amber light faces front, red faces rear. Includes two sealed one piece LED lamps, each with 8' of wire and all necessary electrical connectors and post locking bolts. |
License Plate Bracket
Upgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the left side tail light via the lamp's two mounting studs.
|
Outboard Motor Dolly - 250lb. - Red Made from 14 gauge powder coated steel with a weather resistant synthetic wood mounting block this outbord motor dolly makes it easy to transport and hold your motor weighing up to 250 lbs. 8” wheels and 4" casters with an overall height of 45”, enough to fit a long shaft outboard motor. This outboard motor dolly folds flat to easy storage when not in use. Some assembly required. |
Outrigger Rod Holder with Liner & Strap - Aluminum Features:
|
Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |