Shop by Brand: TACO Marine

Grand Slam 850 Electric VHF Antenna Mount

Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses.

Features:

• Standard 1”-14 thread (male) shaft to accept standard VHF antennas 
• No under-mount clearance required 
• Machined / Anodized aluminum body with a light brushed finish 
• Threaded shaft for consistent lift and descent 
• Delrin bearings for smooth operation 
• Features removable set screw for manual adjustment 
• Kit includes drill template and installation instructions 
• Includes 10” lead for 12-volt DC power supply for lift and descent 
• Accepts 3A fuse in the main +12 VDC power feed (not included) 
• Sold individually 
• Made in the USA 
• 1-year limited warranty

Grand Slam 900 Anchor & Stern Light

Climbing on the boat gunnel to raise and lower an anchor and stern light is dangerous, time consuming and frustrating. The GS-900 allows boat operators to lift and descend this navigational requirement from the safety of the deck, right under the top and without ever having to climb on the gunnel again. Simply extend the crank handle and rotate the light to the upright position or back to its stowed, towing location. The light runs on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. 

Features:

• Safe, no-hassle raising and lowering of an anchor and stern light
• Ideal for boats 39' in length or shorter (12 meters or shorter)
• Certified USCG-required for 2nm
• Standard 1"-14 thread (male) shaft 
• LED light and shaft included
• Machined/Anodized aluminum body with a light brushed finish
• Polished Type-316L stainless steel crank handle
• Folding crank handle locks flush into base
• Threaded shaft for consistent lift and descent
• Delrin bearings for smooth operation
• Roller bearings in crank assembly
• Mounts through up to 2" thick hardtops
• Includes 4" x 1/4" round backing plate (hardware not included)
• Includes 32.75" of tube
• Light tube length allows for modification by installer to exact height
• 1-year limited warranty

Grand Slam 950 Electric Anchor & Stern Light

With the simple push of a button, boaters can safely adjust the position of their Anchor & Stern Light from the comfort of the helm. Ideal for powered vessels 39’ and under (12-meters and under), the GS-950 is certified for USCG-required 2 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. The GS-950 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. 

Features:

• Machined / Anodized aluminum body with a Light-brushed finish 
• Certified for USCG-required 2-nm 
• Includes tube, light and 10” lead for 12-volt DC power supply for light function 
• Threaded shaft for consistent lift and descent 
• Delrin bearings for smooth operation 
• Features removable set pin for manual adjustment 
• Mounts to all hardtops 
• Reliable long-life LEDs 
• 6-Watt Stern Light and 12-watt Anchor 
• Low-draw, 0.6 amps per light 
• Low-voltage 12-24VDC 
• Made in the USA 
• 1-year limited warranty

GS-380-LE Grand Slam Outrigger Mounts - GS-390 Body with GS-380 Arm

Safely deploy outriggers from the comfort of the deck with the Grand Slam 380 Outrigger Mount. This mount features a robust outward rotation handle with detents every 22.5 degrees to prevent uncontrolled movement and a lifting crank handle that folds flush into the base.

Features & Benefits:

• Patent number US7114283
• Ideal for boats 25’ to 40’
• Sleek appearance
• Allows horizontal rotation from under the top
• Allows vertical lift up to 45º from under the top
• Features 30º offset handle for better hand clearance
• Cast stainless steel and machine aluminum construction
• A strong locking head allows for perfect positioning

*Sold as a pair

GS-500 Grand Slam Outrigger Mounts *Only Accepts CF-HD Poles

When it comes to hardcore offshore sport fishing, the Pro Series GS-500 Outrigger Mount is the most durable, attractive and functional base in the industry. The innovative design of the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features our patent-pending Twist & Lock pole connection and pairs exclusively with our award-winning Carbon Fiber Tele-Outriggers up to 24’ long. 

Features & Benefits:

• Twist & Lock Arm design for easier, more secure pole connection
• Eliminates the need for pins or bolts when securing outrigger poles
• Rotate and lift outrigger poles from the safety of the deck
• Heavy-duty, ergonomically shaped outward rotation handle
• Robust, dual-detented lifting crank handle locks flush into base
• Ideal for boats from 32 to 50-plus feet 
• Dredge load tested to handle a full, professional fishing spread 
• Absorbs the torque and whip created by outrigger poles 
• Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base
• Includes matching 6”x 8"x ½” thick oval backing plates 
• Safety detents prevent uncontrolled rotation when deploying outrigger poles
• Allows a controlled 180° rotation, if needed
• Locking head eliminates downward creep of outrigger poles
• No port or starboard designation 
• Includes all mounting hardware for easy installation
• Pairs with 6º Wedge Plates (WP-500-6), sold separately
• Base hole pattern matches all TACO Marine Grand Slam models – making upgrades possible
• 3-year limited warranty

• Creates a tight, rattle-free seal
  
• Adhesive backing for convenient installation
  
• Durable, flexible sponge rubber compound

• Creates a tight, rattle-free seal
  
• Adhesive backing for convenient installation
  
• Durable, flexible sponge rubber compound

Hollow Back 304 Stainless Steel Rub Rail Insert 3/4" x 6'

Sold in 6' increments. 

Features:

• Sold in 6'
• Stainless Steel Type-304/316L
• Drilled and countersunk for #8 screws on 6-inch centers
• 5-year limited warranty

Jaw Slide - Fits 7/8" Tube

Features:

• Delrin insert for a rattle-free and smooth operation 
• Offered for 7/8" & 1" tube

Kite Fishing 3-Rod Cluster

One of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outfits in the perfect boat location. This three-rod cluster keeps everything close, tidy and easy to handle when the bite turns on.

Features:

• 15° bent shaft for clearance
• Fits all standard gunnel mount rod holders
• Fish with multiple rods from one holder
• Includes form-fitted, anti-fungal PVC white liner
• Gimbal design for secure locking placement
• Sold individually
• Bag included
• 3-year limited warranty

Latch-tite™ Lifting Handle - 2-1/2" Round - Stainless Steel

Stainless Steel Type 316

Deluxe Polished

Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.

The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.

Features:

• Cast stainless steel
• Deluxe polish finish
• Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
• Over center anti-rattle handles provide quiet operation
• Concealed fasteners
• Mold plugs available upon request for boat builders

Specifications:

• Dimensions: 2-1/2" Diameter
• Edge Thickness: 5/32"
• Adjust Depth: 1-3/4"
• Hole Size: 2-1/16"
• Overall Depth: 2-5/8"
• Screw: #8

Latch-tite™ Lifting Handle - 3" Round - Stainless Steel

Stainless Steel Type 316

Deluxe Polished

Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.

The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.

Features:

• Cast stainless steel
• Deluxe polish finish
• Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
• Over center anti-rattle handles provide quiet operation
• Concealed fasteners
• Mold plugs available upon request for boat builders

Specifications:

• Dimensions: 3" Diameter
• Edge Thickness: 3/32"
• Adjust Depth: 2-7/8"
• Hole Size: 2-9/16"
• Overall Depth: 3-13/16"
• Screw: #8

Latch-tite™ Stainless Steel 2-7/16" Square

Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Square design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening. 

The Latch-tite™ series is for applications that require a heavy-duty, high performance construction and high quality appearance.

Features:

• Cast stainless steel
• Type 316
• Deluxe polish finish
• Unique stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
• Over center anti-rattle handles provide quiet operation
• Concealed fasteners
• Mold plugs available upon request for boat builders
• Adjustable depth

Specifications:

• Dimensions: 2-7/16" x 2-7/16"
• Edge Thickness: 5/32"
• Adjust Depth: 1-3/4"
• Hole Size: 2-1/16"
• Overall Depth: 2-5/16"
• Screw: #8

Low Profile Adjustable Seat Slide

This low-profile design provides frictionless operation and is easily adaptable for a multitude of marine applications. Its high-strength polymer glides provide the smooth movement with a durable locking action. It comes with a front-mounted activation lever, which is easily accessible in all seven positions when seated. The complete kit includes the housing assembly, mounting plate, fasteners, and installation instructions – making it the perfect all-in-one seat slide package.

Features:

• Meets ABYC H31 testing standards
• Precision-machined 6000-series aluminum chassis 
• High-strength polymer glides provide self-lubricated, rattle-free, smooth operation
• Features seven adjustable, equally spaced positions with 5-1/2” of travel
• Secure fit with universal mounting bolt pattern on both pedestal and box applications 
• Easy installation and detachment with modular mounting plate
• Front activation lever that slides with the seat for ease of use 
• Ideal for seats 23” to 28" wide
• Made in the USA
• 3-year limited warranty 

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

• High density polyethylene
  
• UV-stabilized
  
• Available in full and half sheets
  
• Also available in cut sizes that are individually wrapped for retail merchandising
  
• Withstands all harsh marine environments
  
• Three year limited warranty
  
• Made in USA

• Electronic Boxes
  
• Cup Holders
  
• Shelves
  
• Cabinets
  
• Hatches and Doors
  
• Chart Holders
  
• Table Tops
  
• Rod Holder Racks
  
• Instrument Panels
  
• Tool Holders
  
• Leaning Posts
  
• Bait Wells and Covers
  
• Shower Floors

Multi-Purpose 15° Portable Cleat

We've combined a cleat and a fender holder into one glorious accessory with our Multi-Purpose Portable Deck Cleat! Securely tie off lines and set fenders all in one place. Because it fits standard rod holders, this cleat is movable, stowable and a practical step forward in your boating and docking experience.

Features:

• Large S-shape 9-inch cleat design
• Accommodates up to ¾-inch dock line for larger boat applications
• Pipe diameter of 1-1/2-inch fits into standard rod holders 1-5/8-inch in diameter
• Loop hole design to hang fenders over the side
• Ideal for hanging hose while washing boat
• Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat
• 1-year limited warranty

• Ideal for boats under 25'
  
• Anodized Aluminum frame with grab-rail
  
• Four adjustable Aluminum rod holders
  
• Convenient removable soft side under seat storage (also sold separately as Neptune Tackle Storage Bag L10-1003BAG)
  
• Folding foot rest with heavy-duty design supports up to 300 lbs
  
• Full length mounting pads
  
• Cooler storage with convenient strap
  
• Easy Do-It-Yourself assembly
  
• Comfortable cushion seat
  
• 72qt cooler storage area with strap
  
• Cooler storage area: 24-1/2" H x 29-1/4" W
  
• Polished anodized Aluminum frame
  
• Marine-grade vinyl upholstered cushion
  
• Accommodates a Universal Leaning Post Backrest for additional comfort (sold separately as L10-1002-1)
  
• Footprint = 14" x 35"
  
• 3 year limitied warranty

• 1000 Denier fabric withstands the harsh saltwater elements
  
• Ballistic nylon bottom provides a waterproof seal
  
• YKK marine-grade zippers are strong and durable
  
• Two double zippered outer pockets ideal for up to five fluorocarbon spools
  
• Two 9" inner pockets ideal for storing personal items
  
• One 29" long tool compartment for safely storing all tackle gear
  
• Includes welt track clips for hanging on Taco Marine leaning post
  
• Center storage space has one of the largest tackle capacities on the market today accommodating 4 full size 3700 Plano boxes, 4 Plano 3600 boxes and 4 smaller Plano boxes
  
• Attractive carbon gray fabric with black trim and hard shell bottom liner with 6 rubber feet and drain holes
  
• Limited 1 year Warranty
  
• Made in USA

Olympic 5-Rod Holder Cluster

Superior to the competition, TACO Marine's Olympic Rod Holder Cluster "Five-Banger" is the ultimate in on-boat and transportable rod storage. The ability to store, transport, clean and fish combos from this heavy-duty but lightweight polished aluminum unit is the perfect addition to your tackle arsenal.

Features:

• Lightweight and tightly groups five rods in one rod holder
• Flared 9-3/4" rod holders for big game tackle
• Durable, welded, high-polished anodized aluminum construction
• I-Beam construction ensures rods are locked and properly spread out
• Fits into standard rod holders 1-5/8" in diameter
• Ideal for storing rods in a compact space
• Convenient rigging station in preparation of a trip
• Serves as a convenient wash down station
• Accepts F31-2201WHA-C insert, sold separately
• Packaged in mesh bag for easy drying if stored wet and to avoid from scratching deck or storage surfaces on the boat
• Solid gimbal design for additional strength
• 3-year limited warranty

• Protects outrigger poles from damage
  
• Nylon mesh bag resists moisture
  
• 74" x 12" black mesh
  
• Dual pockets prevent outriggers from scratching each other