Shop by Brand: Megaware

KeelGuard® - 7' - Hunter Green

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Hunter Green
• KeelGuard® Size: 7'
• Boat Size up to 20'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 7' - Light Gray

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Light Gray
• KeelGuard® Size: 7'
• Boat Size up to 20'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 7' - Sand

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Sand
• KeelGuard® Size: 7'
• Boat Size up to 20'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 7' - White

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: White
• KeelGuard® Size: 7'
• Boat Size up to 20'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Black

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Black
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Gray

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Gray
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Hunter Green

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Hunter Green
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Light Gray

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Light Gray
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Red

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Red
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Sand

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Sand
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - White

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: White
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 8' - Yellow

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Yellow
• KeelGuard® Size: 8'
• Boat Size up to 22'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 9' - Black

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Black
• KeelGuard® Size: 9'
• Boat Size up to 24'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 9' - White

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: White
• KeelGuard® Size: 9'
• Boat Size up to 24'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

KeelGuard® - 9' - Yellow

The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.

Megaware KeelGuard® Engineering

Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.

Megaware KeelGuard® Colors & Sizes

Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.

Lifetime Warranty

Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.

Features:

• Color: Yellow
• KeelGuard® Size: 9'
• Boat Size up to 24'
• 3M® Technology
• 3M® Acrylic Pressure-Sensitive Adhesive
• Pliable & Tough
• Research & Technology
• Contoured Edge
• Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds
• Eliminate Costly Repairs
• Enjoy the Highest Quality and Superior Engineering
• Increase the Value of Your Boat
• 5” Width: Contact for Custom Sizes
• Made in the USA

PontoonGuard® - 32' Kit - (2) 16' Guards f/Pontoon Up To 21' - Black

Protect & Customize Your Pontoon - Protect Against Docks & Obstacles

Megaware PontoonGuard® is a custom engineered protection and safety product designed specifically for your pontoon. It provides protection to the side of the tubes against abrasion and chafing caused by docks, other pontoons, and hidden obstacles.

Megaware Engineering

The Megaware PontoonGuard® incorporates a 3M® reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights. This can be useful either on or off water while beached, anchored, trailered or parked.

Warranty

Megaware guarantees your Megaware PontoonGuard® for a period of three years from the date of purchase.

Megaware PontoonGuard® Sizes & Colors

Megaware PontoonGuard® is available in two lengths and comes in 4 great looking colors to compliment your pontoon. All colors are UV-stabilized for true color that lasts a lifetime.

Size:

For Pontoons up to 21 ft. - 32 ft Kit - (2) 16 ft. Length Megaware PontoonGuard®s

Features:

• Protect Vulnerable and Exposed Areas of Your Pontoon
• Make Your Vessel More Visible During Night Operations or While Anchored or Beached
• Avoid Unsightly Dents and Scrapes from Docking Your Pontoon
• Add a Custom Sleek Look to Your Pontoon

PontoonGuard® - 32' Kit - (2) 16' Guards f/Pontoon Up To 21' - Gray

Protect & Customize Your Pontoon - Protect Against Docks & Obstacles

Megaware PontoonGuard® is a custom engineered protection and safety product designed specifically for your pontoon. It provides protection to the side of the tubes against abrasion and chafing caused by docks, other pontoons, and hidden obstacles.

Megaware Engineering

The Megaware PontoonGuard® incorporates a 3M® reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights. This can be useful either on or off water while beached, anchored, trailered or parked.

Warranty

Megaware guarantees your Megaware PontoonGuard® for a period of three years from the date of purchase.

Megaware PontoonGuard® Sizes & Colors

Megaware PontoonGuard® is available in two lengths and comes in 4 great looking colors to compliment your pontoon. All colors are UV-stabilized for true color that lasts a lifetime.

Size:

For Pontoons up to 21 ft. - 32 ft Kit - (2) 16 ft. Length Megaware PontoonGuard®s

Features:

• Protect Vulnerable and Exposed Areas of Your Pontoon
• Make Your Vessel More Visible During Night Operations or While Anchored or Beached
• Avoid Unsightly Dents and Scrapes from Docking Your Pontoon
• Add a Custom Sleek Look to Your Pontoon

PontoonGuard® - 40' Kit - (2) 20' Guards f/Pontoon Up To 25' - Gray

Protect & Customize Your Pontoon - Protect Against Docks & Obstacles

Megaware PontoonGuard® is a custom engineered protection and safety product designed specifically for your pontoon. It provides protection to the side of the tubes against abrasion and chafing caused by docks, other pontoons, and hidden obstacles.

Megaware Engineering

The Megaware PontoonGuard® incorporates a 3M® reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights. This can be useful either on or off water while beached, anchored, trailered or parked.

Warranty

Megaware guarantees your Megaware PontoonGuard® for a period of three years from the date of purchase.

Megaware PontoonGuard® Sizes & Colors

Megaware PontoonGuard® is available in two lengths and comes in 4 great looking colors to compliment your pontoon. All colors are UV-stabilized for true color that lasts a lifetime.

Size:

For Pontoons up to 25 ft. - 40 ft Kit - (2) 20 ft. Length Megaware PontoonGuard®s

Features:

• Protect Vulnerable and Exposed Areas of Your Pontoon
• Make Your Vessel More Visible During Night Operations or While Anchored or Beached
• Avoid Unsightly Dents and Scrapes from Docking Your Pontoon
• Add a Custom Sleek Look to Your Pontoon

ScuffBuster™ Standard - 5.75" x 4.5" - Solid Bowguard - 22G - Stainless Steel

Protect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly Marring

The Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.

Warranty

Megaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Protect Your Boat's Gelcoat
• Minimize Roller and Trailer Scuffs
• Bend to Conform to Hull
• Mirror Polished Finish

ScuffBuster™ Standard with Notch - 5.75" x 4.5" - Notched Bowguard - 22G - Stainless Steel

Protect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly Marring

The Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.

Warranty

Megaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Protect Your Boat's Gelcoat
• Minimize Roller and Trailer Scuffs
• Bend to Conform to Hull
• Mirror Polished Finish

ScuffBuster™ XL - 9" x 8.75" - Solid - 22G - Stainless Steel

Protect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly Marring

The Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.

Warranty

Megaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Protect Your Boat's Gelcoat
• Minimize Roller and Trailer Scuffs
• Bend to Conform to Hull
• Mirror Polished Finish

ScuffBuster™ XL with Notch - 9" x 8.75" - Notched - 22G - Stainless Steel

Protect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly Marring

The Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.

Warranty

Megaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Protect Your Boat's Gelcoat
• Minimize Roller and Trailer Scuffs
• Bend to Conform to Hull
• Mirror Polished Finish

Megaware SkegGuard® 27021 Stainless Steel Replacement Skeg 

Model Guide

•  Mercruiser - Alpha I 1985-1990

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27031 Stainless Steel Replacement skeg

Model Guide

•  Mercruiser - Alpha I Generation II 1991-Present

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27041 Stainless Steel Replacement Skeg

Model Guide

•  Yamaha - 200-225-250V Max SHO 2013-Present 200V Max HPDI 2004-2010

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27051 Stainless Steel Replacement Skeg 

Model Guide

•  Mercuiser - Bravo I & III 1990-Present

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27061 Stainless Steel Replacement 

Skeg Model Guide

• Mariner - 135 2 & 4 Stroke 1978-2005 135 2006-2011 150-175-200-225-250-275-300 Optimax 2005- Present 150-175 1978-2004 200 1978-1995 200 2 & 4 Stroke 1996-2005 225 2 Stroke 1978-2004
• Mercury - 90 2014-2016 115 4 Stroke 2014-2016 115-2016 ProXS 140 2003-2005 135-150-175 2 Stroke 1987-Present 200 1995-Present 225 2 Stroke 1978-1995 250 1978-1995

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

Mirror Polished Marine Grade 316 Stainless Steel

• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27071 Stainless Steel Replacement Skeg

Model Guide

• Force - 70 -90 2 Stoke 1998- 2002 (By Mercury)
• Honda - 75-90-115 4 Stroke 1995-2007 60-75 4 Stroke 2010-Present
• Marine - 50-60 Bigfoot 2003-2014 70-90-100-115-125 Incl. Optimax 2 & 4 Stroke 1983-Present
• Mercury - 40-50-60 Bigfoot 2001-2013 40-50 Command Thrust 2014-Present 50 4 Stroke 1999-2013 60 Command Thrust 2014-Present 75 2 & 4 Stroke 2003-2013 90 2 & 4 Stroke 2001-2013 115 2& 4 Stroke 2002-2013 115 2 Stroke 2014-2016 125 2003-2005
• Yamaha - 60-70-80-90-100 2 & 4 Stroke 1998-2001
• Nissan/Tohatsu - 70-90-115- 120 -140 2 Stroke 1993- Present

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27081 Stainless Steel Replacement Skeg

Model Guide

• Evinrude - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001
• Johnson - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001 125 1994-1998 135 20" Shaft 2000-2006 150 20" Shaft 2002-2006 175-200 1994-2001 225-250-300 1994-2001 175-200-20” Shaft 2 Stroke 2006-Present
• Suzuki - 300 4 Stroke 2009-Present
• OMC Cobra - V6 & V8 1986-1994

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27101 Stainless Steel Replacement Skeg 

Model Guide

• Johnson - 80 1994-1998 88 1990-1996 90-100-115-120-140 2 Stroke 1980-2001 & OMC Cobra 4 Cylinder 1986-1994

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining

SkegGuard® 27131 Stainless Steel Replacement Skeg 

Model Guide 

• Evinrude - 40-50-55-60 2 Stroke 2002-Present 45 2 Stroke 1994-1997 65 1995-2012 
•  Johnson - 40-50-55-60 2 Stroke 2004-Present 45 1994-1997 65 1995-2012 70 1994-2000

Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement

Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.

Protect Your Skeg with the Best Protector

The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.

This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

Megaware SkegGuard® is available in models to fit virtually any skeg.

Warranty

Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.

Features:

• Mirror Polished Marine Grade 316 Stainless Steel
• Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
• Drain Hole Prevents Corrosion and Freezing
• Won’t Compromise Performance
• Do-It-Yourself Install in Less than 10 Minutes
• Installs with as Little as 2-3 Inches of Skeg Remaining