Shop by Brand: Lenco Marine

21" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator

Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.

Kit Contents:

• 2 each of stainless steel trim tab planes
• 4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
• Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.

The following to be supplied by customer:

• Boat mounting hardware supplied by customer
• Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
  required. To order the lengths of your choice see the Lenco Accessories Section.

Specifications:

• Suggested Boat Length: 24' to 42'
• Length of Tab: 21"
• Width of Tab: 14"
• Minimum Transom Height: 10.5"
• Blades: 7 Gauge Stainless Steel
• Finish: Electro-Polished
• Switch Kit: Sold Separately
• Switch Required: 15071-001
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4" x 12" Limited Space Trim Tab Kit w/o Switch Kit -12V - Electro-Polished - Short Actuator 

Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.

Kit Contents:

• 2 each of 12-gauge 304 stainless steel trim tab blades
• 2 each of #15057-001 XD actuator with 6' lead and Deutsch plugs
• 2 each of #30133-103  20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting bracket with gland seal
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 14' to 25'
• Length of Tab: 4"
• Width of Tab: 12"
• Minimum Transom Height: 13"
• Blades: 12 Gauge Stainless Steel
• Finish: Electro-Polished
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 2 each of 12-gauge 304 stainless steel trim tab blades
  
• 2 each of #15054-001 Standard actuator with 6' lead and Deutsch plugs
  
• 2 each of #30133-103 20' actuator extension wiring harnesses
  
• 2 each of #15085-001 (116) upper mounting bracket with gland seal
  
• 1 each of the Lenco owner's / installation manual
  
• All necessary stainless steel mounting hardware

• Trim Tab Kit: Limited Space
  
• Blades: 12 Gauge Stainless Steel
  
• Finish: Electro-Polish
  
• Switch Kit: Sold Separately
  
• Class: Fuel Efficient
  
• Compliance: CE Certified
  
• Compatibility: Any Boat
  
• Made in: Stuart, Florida U.S.A.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4" x 12" Limited Space Trim Tab Kit w/o Switch Kit -12V - Standard Finish - Short Actuator 

Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.

Kit Contents:

• 2 each of 12-gauge 304 stainless steel trim tab blades
• 2 each of #15057-001 XD actuator with 6' lead and Deutsch plugs
• 2 each of #30133-103  20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting bracket with gland seal
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 14' to 25'
• Length of Tab: 4"
• Width of Tab: 12"
• Minimum Transom Height: 13"
• Blades: 12 Gauge Stainless Steel
• Finish: Standard
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Limited Space Trim Tab Kit- Standard Actuator 

12-Volt Actuators

Lenco Electric Limited Space Trim Tab Kits are engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. For boat lengths 14' to 25'. 

Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.

Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" diameter hinge pin. Upper and lower high-impact corrosion-proof mounting brackets with mechanical cable gland seal. 

Kit Contents

• 2 each of 11-gauge 304 stainless steel trim tab blades
• 2 each of #15054-001 Standard actuator with 6' lead and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting bracket with gland seal
• 1 each of the Lenco owner's / installation manual
• All necessary stainless steel mounting hardware

Specifications

• Trim Tab Kit: Limited Space
• Blades: 11 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Made in: Stuart, Florida U.S.A.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7 Degree Mounting Shim 

For Upper # 50015-001D(118) & Lower # 50014-001D(119) Mounting Bracket.

Specifications

• Lenco Part #: 50015-002D
• System Type: Single or Dual Actuator
• Compatibility: Any Boat

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 2 each of 12-gauge stainless steel trim tab blades
  
• 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
  
• 2 each of #30133-103 20' actuator extension wiring harnesses
  
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
  
• 2 each of #50014-001 (119) lower mounting brackets
  
• 1 each of the Lenco owner's / installation manual
  
• All necessary stainless steel mounting hardware

• Blades: 12 Gauge Stainless Steel
  
• Finish:Smooth
  
• Class: Fuel Efficient
  
• Compliance: CE Certified
  
• Compatibility: Any Boat

• 2 each of 12-gauge stainless steel trim tab blades
  
• 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
  
• 2 each of #30133-103 20' actuator extension wiring harnesses
  
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
  
• 2 each of #50014-001 (119) lower mounting brackets
  
• 1 each of the Lenco owner's / installation manual
  
• All necessary stainless steel mounting hardware

• Blades: 12 Gauge Stainless Steel
  
• Finish:Smooth
  
• Class: Fuel Efficient
  
• Compliance: CE Certified
  
• Compatibility: Any Boat

9" x 12" Edge Mount Trim Tab Kit without Switch Kit -12V 

Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 16' to 25'
• Length of Tab: 9"
• Width of Tab: 12"
• Hinge Height: 2"
• Minimum Transom Height: 13.5"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks
  
• Actuator speed is precise and controllable so there are no surprises at top speeds

• Instant response
  
• Fully submersible, maintenance-free and sealed for life
  
• High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

• Tactile LED Indicator Switch Kit
  
• 2 actuators with 6' Lead & Deutsch Plugs
  
• 2 12 Gauge SS Electro Polished trim tab planes
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All Necessary stainless steel mounting Hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V

Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades

Kit Contents:

• 2 each of 12-gauge stainless steel Electro-Polished trim tab blades
• 2 each of #15054-001 actuators with 6' lead and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (#116) upper mounting bracket with gland seal   
• 2 each of #50014-001 (#119) lower mounting bracket 
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 16' to 26'
• Length of Tab: 9"
• Width of Tab: 12"
• Minimum Transom Height: 13.5"
• Blades: 12 Gauge Stainless Steel
• Finish: Electro-Polished
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks
  
• Actuator speed is precise and controllable so there are no surprises at top speeds

• Instant response
  
• Fully submersible, maintenance-free and sealed for life
  
• High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case

• Built-In Retractor Feature
  
• Solid State Electronics
  
• Plug & Play
  
• Low Profile Design
  
• Self-Contained, sealed keypad & solid state control box with waterproof connectors
  
• Simple, Quick Installation
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75'

• Standard Tactile Switch Kit
  
  2 actuators with 6' Lead & Deutsch Plugs
  
  • 2 12 Gauge SS Electro Polished trim tab planes
    
  • 2 20' Actuator Extension Wiring Harness
    
  • 2 Upper Mounting Bracket with Gland Seal
    
  • 2 Lower Mounting Bracket
    
  • All Necessary stainless steel mounting Hardware

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 12" Standard Trim Tab Kit w/Double Rocker Switch - 12V

Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.

Kit includes: 

• Self-contained sealed keypad
• Control box
• 36" Pigtail

Specifications:

• Suggested Boat Length: 16' to 25'
• Length of Tab: 9"
• Width of Tab: 12"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Double Rocker
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 12" Standard Trim Tab Kit w/LED Integrated Switch Kit- 12V 

Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.

Kit includes: 

• Self-contained sealed keypad
• Control box
• 36" Pigtail

Specifications:

• Suggested Boat Length: 16' to 25'
• Length of Tab: 9"
• Width of Tab: 12"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: LED Indicator
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit- 12V 

Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.

Kit includes: 

• Self-contained sealed keypad
• Control box
• 36" Pigtail

Specifications:

• Suggested Boat Length: 16' to 25'
• Length of Tab: 9"
• Width of Tab: 12"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Standard Tactile
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 12" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 16' to 25'
• Length of Tab: 9"
• Width of Tab: 12"
• Hinge Height: 2"
• Minimum Transom Height: 14"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 1 each of 12-gauge 304 stainless steel trim tab plane
  
• 1 each of #15055-001 XD actuator with 6' lead and Deutsch plug
  
• 1 each of #30133-002 14' actuator extension wiring harness
  
• 1 each of #15085-001 (116) upper mounting bracket with gland seal
  
• 1 each of the Lenco owner's/installation manual
  
• All necessary stainless steel mounting hardware

• Trim Tab Kit: Airboat
  
• Blades: 12 Gauge Stainless Steel
  
• Finish: Smooth
  
• Switch Kit: Sold Separately
  
• Class: Fuel Efficient
  
• Compliance: CE Certified
  
• Compatibility: Any Boat
  
• Made in: Stuart, Florida U.S.A.

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

• Tactile LED Indicator Switch Kit
  
• 2 12-volt Actuators with 6-foot leads and Deutsch connectors
  
• 2 20' actuator extension harnesseswith Deutsch connectors
  
• 2 Stainless steel trim tab blades
  
• 2 upper mounting bracket with gland seal
  
• 2 lower mounting bracket
  
• All Necessary stainless steel Mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Built-In Retractor Feature
  
• Solid State Electronics
  
• Plug & Play
  
• Low Profile Design
  
• Self-Contained, sealed keypad & solid state control box with waterproof connectors
  
• Simple, Quick Installation
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75'

• Standard Tactile Switch Kit
  
• 2 12-volt Actuators with 6-foot leads and Deutsch connectors
  
• 2 20' actuator extension harnesseswith Deutsch connectors
  
• 2 Stainless steel trim tab blades
  
• 2 upper mounting bracket with gland seal
  
• 2 lower mounting bracket
  
• All Necessary stainless steel Mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 22' to 30'
• Length of Tab: 9"
• Width of Tab: 18"
• Hinge Height: 2"
• Minimum Transom Height: 14"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 9" Edge Mount Trim Tab Kit without Switch Kit -12V 

Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 14' to 18'
• Length of Tab: 9"
• Width of Tab: 9"
• Hinge Height: 2"
• Minimum Transom Height: 13.5"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Built-In Retractor Feature
  
• Solid State Electronics
  
• Plug & Play
  
• Low Profile Design
  
• Self-Contained, sealed keypad & solid state control box with waterproof connectors
  
• Simple, Quick Installation
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75'

• Standard Tactile Switch Kit
  
• 2 Actuators with 6' lead & Deutsch Plugs
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 12 gauge Stainless steel trim tab planes
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All stainless steel mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks
  
• Actuator speed is precise and controllable so there are no surprises at top speeds

• Instant response
  
• Fully submersible, maintenance-free and sealed for life
  
• High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

• Tactile LED Indicator Switch Kit
  
• 2 actuators with 6' Lead & Deutsch Plugs
  
• 2 12 Gauge SS Electro Polished trim tab planes
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All Necessary stainless steel mounting Hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12V

Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades

Kit Contents:

• 2 each of 12-gauge stainless steel Electro-Polished trim tab blades
• 2 each of #15054-001 actuators with 6' lead and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (#116) upper mounting bracket with gland seal   
• 2 each of #50014-001 (#119) lower mounting bracket 
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 13' to 20'
• Length of Tab: 9"
• Width of Tab: 9"
• Minimum Transom Height: 13.5"
• Blades: 12 Gauge Stainless Steel
• Finish: Electro-Polished
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks
  
• Actuator speed is precise and controllable so there are no surprises at top speeds

• Instant response
  
• Fully submersible, maintenance-free and sealed for life
  
• High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case

• Built-In Retractor Feature
  
• Solid State Electronics
  
• Plug & Play
  
• Low Profile Design
  
• Self-Contained, sealed keypad & solid state control box with waterproof connectors
  
• Simple, Quick Installation
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75'

• Standard Tactile Switch Kit
  
• 2 actuators with 6' Lead & Deutsch Plugs
  
• 2 12 Gauge SS Electro Polished trim tab planes
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All Necessary stainless steel mounting Hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

• Tactile LED Indicator Switch Kit
  
• 2 12-volt Actuators with 6-foot leads and Deutsch connectors
  
• 2 20' actuator extension harnesseswith Deutsch connectors
  
• 2 Stainless steel trim tab blades
  
• 2 upper mounting bracket with gland seal
  
• 2 lower mounting bracket
  
• All Necessary stainless steel Mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

• Built-In Retractor Feature
  
• Solid State Electronics
  
• Plug & Play
  
• Low Profile Design
  
• Self-Contained, sealed keypad & solid state control box with waterproof connectors
  
• Simple, Quick Installation
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75'

• Standard Tactile Switch Kit
  
• 2 12-volt Actuators with 6-foot leads and Deutsch connectors
  
• 2 20' actuator extension harnesseswith Deutsch connectors
  
• 2 Stainless steel trim tab blades
  
• 2 upper mounting bracket with gland seal
  
• 2 lower mounting bracket
  
• All Necessary stainless steel Mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9" x 9" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 14' to 18'
• Length of Tab: 9"
• Width of Tab: 9"
• Hinge Height: 2"
• Minimum Transom Height: 14"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 14' Deutsch-Connected Extension
  
• 16 Awg
  
• Abyc Compliant

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 20' Deutsch-Connected Extension
  
• 14 Awg
  
• Abyc Compliant

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.