Rod/Reel Hanger Penn INT 30VISW Bright Gold Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. Vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gold. Black Powder Coat, and now available White Powder Coat! Rod and Reel Hanger Set Individual sizes to fit the most popular big game reels. Constructed of Marine Grade Anodized Aluminum Bright Gold. The reel is attached to Hanger by spring-loaded pins riding in a bracket. Pins snap into harness lugs on top of the reel. The reel cannot swing since it is held in an upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically, or Overhead. Available in sizes to fit most Penn, Shimano, Dual, and various other reels. Available in Gold Only. |
Sidewinder Backing Plate f/Bolt-In Holders
Below top operation. Fully locked in Running and 80° out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. Available with Quick Laydown or Curved Tube. No ball bearings to rust. Internal Delrin and nylon bearing surfaces provide smooth operation and prevent metal to metal contact. Accepts our 16Ft Extra Strong (AP3916XS) or 18Ft (AP3918) Outrigger Pole. Has 4"x6" Mounting plate. Extends 14" above and 8-1/2" below mounting plate. Fits all outrigger ready boats. |
Sidewinder Bolt-On Outrigger Mount
Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. No ball bearing to rust. Internal Delrin Bushings and Nylon Bearing Surfaces provide smooth operation and prevent metal to metal contact. |
Rod Storage Systems
Single Rod Rack Sets Anodized Finish: Bright Black Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead. |
Rod Storage Systems
Single Rod Rack Sets Anodized Finish: Bright Gold Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead. |
Rod Storage Systems Single Rod Rack Sets Anodized Finish: Bright Silver Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead. |
Rod Storage Systems
Single Rod Rack Sets Finish: Satin Silver Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead. |
Spreader Kit for AP3519XS Poles Spreader Kit SP4919SL/XS Silver for AP3519XS & AP3522 Heavy Duty Poles. Includes all spreader hardware and instructions. Not shown in picture: 1-3/8" x 18" Reinforcing Tube - 2 Each. |
RH5931
Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders. |
Release Clips - Pair Black release clips - pair |
Single Rod Rack Sets |
Vinyl Rubber Inserts Clamp-On Rod Holder Rubber Inserts Outside diameter is about 1-7/8” or (1.902”) inches. Inside diameter is about 1-5/8” inches. Overall length is 7-1/2” inches |
RH511 0 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL |
RH516 0 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS |
RH526 30 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325 RH52XS |
RH528 15 Degree Medium Vinyl Rubber Insert for RH529H, RH529HS, RH5329H, RH529XS |
RH531 30 Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575 |
RH535 15 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |