Shop by Brand: Jabsco

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 2-1/2" W, 1" Shaft Diamter

Features:

• Material: Nitrile
  
• Drive Type: Single Flat Drive
  
• Number of Blades: 9
  
• Dimensions: Diameter:3-3/4", Shaft Diameter:1", Shaft Width:2-1/2"
  
• Insert Material:Brass

Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 3-1/2" W, 1" Shaft Diameter

Features:

• Material: Nitrile
  
• Drive Type: Spline Drive
  
• Number of Blades: 9
  
• Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 3-1/2"

Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

JABSCO WATER PRESSURE REGULATOR
FLUSH MOUNT MODEL 44411-SERIES

Designed for day and night protection of the entire plumbing system fromunregulated city water system hook-ups. Whether connected to a dock-sidemain or a campground faucet, the new Jabsco Regulator will maintain regulatedoutput at low or high flow rates. The removable strainer protectsvalves and seal-seats from pipe scale and other debris.

FEATURES

• Reduces unregulated city water pressures that can runas high as 125 psi down to a safe 45 psi - automatically
  
• Features built-in backflow preventer. Federal and Staterequired on RV's with water service hookup
  
• Flush mounts permanently in vessel super structure
  
• Easily replaces most original city water entries
  
• Automatic pressure regulation
  
• Built-in backflow preventer
  
• Easy cleaning strainer
  
• Dust cap

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Joker Valve Kit

Fits Models 29090/29120/29200/58040/58060/58080/58260/58240/58280/58500

Joker/Check Valve Kit

For use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits.

Fits inside the discharge elbow and the connection of the pump cylinder.

Motor Cover for 37010 Series

Jabsco's Motor Cover for 37010 Series Electric Toilets

WARNING: This product can expose you to chemicals including Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Neoprene Impeller Kit with Cover, Gasket or O-Ring - 6-Blade - 5/16 Shaft Diameter

Jabsco's Neoprene Impeller Kit is used specifically in Jabsco's Water Puppy, Part #6617.

Included:

• Cover
  
• Gasket
  
• O-Ring

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

31705 Bilge and Shower Drain Pump
Bilge/Livewell/General Purpose Diaphragm Pump

Features:

• 12v
  
• Self-Priming from dry up to 2.4m (7.8ft)
  
• Run dry without damage
  
• Smooth flow
  
• Four piston, diaphragm pump
  
• Powerful heavy duty motor with Thermal Overload Protection
  
• Snap-in Ports
  
• Waterproof coating
  
• Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards)
  
• Meets EN 50081-1 Electro-magnetic Compatiblity
  
• Complies with EN ISO 8849 MARINE Electric Bilge Pump

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Fine Mesh Pumpgard
In-Line Strainer

Compact pre filter prevents particles jamming valves and causing pump breakdowns - we've given them a screw off, transparent housing for easy inspection and quick, in place cleaning. Our new Universal model makes it easier than ever to install your pump by fitting directly into diaphragm pump inlet port as well as benefiting from swivelled angled inlet port on a rotating body so inlet hose can approach from any direction!

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Pumpguard In-Line Strainer - 1/2" NPT

Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.


Accommodations: For 1/2" Line

For Use With: In-Line

Material: Plastic & Stainless Screen

Type: Strainer

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Pumpguard In-Line Strainer - 1/2" NPT Port

Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.

Prevents dirt from entering pump intake. Works in any position. Easy to install and clean. Has transparent housing and stainless steel mesh filtering screen. Jabsco Pumpguard in-line strainers make great filtering agent.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Replacement Sealed Beam for 135SL Searchlight

Features:

• 50 Watt light
  
• 3-1/2" x 6" bulb
  
• For 135SL Searchlight

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Service Kit f/18590 Macerator Pumps

For older pumps with brass studs, washers and acorn nuts

**Stainless Steel Bolt Kit - (17288-1000) sku-56848 - must be purchased**

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Service Kit f/Quiet Flush 37045/37245 Series

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Shower & Bilge Pump - 3.4GPM - 12V

Features:

• Flow Rate: Nominal 13 Litres/min (3 US gallons/min)
• Self-priming from dry up to 2M (6')
• Quiet running and fully corrosion resistant
• Supplied with pumpgard filter

Specifications:

• Body Materials: Plastic
• Port Type: 19mm (3/4") hose barb
• Voltage: 12 (Vdc)
• Motor Type: Permanent magnet
• Amp Draw: 8 (amp)
• Fuse Size: 10 (amp)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Shower & Bilge Pump - 3.4GPM - 24V

Features:

• Flow Rate: Nominal 13 Litres/min (3 US gallons/min)
• Self-priming from dry up to 2M (6')
• Quiet running and fully corrosion resistant
• Supplied with pumpgard filter

Specifications:

• Body Materials: Plastic
• Port Type: 19mm (3/4") hose barb
• Voltage: 24 (Vdc)
• Motor Type: Permanent magnet
• Amp Draw: 4 (amp)
• Fuse Size: 5 (amp)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Twist n' Lock Pump Assembly

The intuitive simple to use Twist Lock handle works by locking the redesigned piston assembly into place helping to prevent back flow of any waste water into the bowl.

Base valve gasket is included.

Compatible Devices:

• 29090 Series
  
• 29120 Series

WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Water Pressure Regulator - Flush Mount - Chrome - 45 psi

Designed for day and night protection of the entire plumbing system from unregulated city water system hook-ups. Whether connected to a dock-side main or a campground faucet, the Jabsco Regulator will maintain regulated output at low or high flow rates. The removable strainer protects valves and seal-seats from pipe scale and other debris.

Features:

• Water Pressure Regulators protect your boat's water system from damaging pressures of unregulated city water hook-ups
  
• Reduces unregulated city water pressures that can run as high as 125 psi down to a safe 45 psi - automatically
  
• Built-in backflow preventer Federal and State required on RV's with water service hookup
  
• Includes GHT (Garden Hose Thread) fittings for potable garden hose connection

Water Pressure Regulator - Flush Mount - White

Easy to install, easy-clean in-line filter, permanently installed flush mount model and in-line model with brass garden hose fittings that connect dockside water entry and garden hose water hook-up. Reduce high water pressures (up to 100 psi down to 35 psi).

Features:

• Built-in back flow preventer
  
• Easy-to-install
  
• Easy clean in-line filter