Shop by Brand: C. Sherman Johnson

Single-Hook Anchor Chain Tensioner for 5/16" Chain

These fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Snap Gate Hook - Body Only - 1/4" - 28 Left Hand

For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. 

Specifications:

• 1/4"-28 LH

Snap Gate Hook - Body Only - 5/16" - 24 Left Hand

For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. 

Specifications:

• 5-16"-24 LH

Snap Gate Hook - Body Only - 5/16" - 24 Right Hand

For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. 

Specifications:

• 5-16"-24 RH

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice Eye

Includes cross-hole for cotter pin

*Dyneema Line not included with fittings

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice Eye

Includes cross-hole for cotter pin

*Dyneema Line not included with fittings

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Splice Line Gate Kit - Aft for One Side

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. 

Specifications:

• 1 x LS-3100 Over Center Gate Hook w/ Splice Eye
• 1 x LS-3300 Gate Eye to Splice Eye Fitting
• 6' Dyneema

Splice Line Gate Kit - Midship for One Side

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. 

Specifications:

• 1 x LS-3100 Over Center Gate Hook w/ Splice Eye
• 1 x LS-3200 Splice Eye to Splice Eye Fitting
• 1 x LS-3300 Gate Eye to Splice Eye Fitting
• 1 x LS-3400 Adjuster w/ Splice Eye
• 6' Dyneema

Splice Line Large Boat Kit for Boats up to 40'

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. 

Specifications:

• 2 x LS-3600 Toggle Jaw w/ Splice Eye
• 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
• 90' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
• Fid/Needle/Twine

Splice Line Small Boat Kit for Boats up to 30'

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. 

Specifications:

• 2 x LS-3600 Toggle Jaw w/ Splice Eye
• 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
• 70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
• Fid/Needle/Twine

Spreader Flag Halyard Kit

Includes 40ft. of polyester line, block with bail and shroud cleat.

T-Style Jaw/Jaw Open Body Turnbuckle - 1/4-28 Thread Size

For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.

Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. 

Specifications:

• Jaw with "T" Toggle Construction
• Machine swage
• Bronze body/ 316 stainless ends
• Wire size: 5/32"
• Breaking strength: 2,500 pounds
• Safe working load: 1,000 pounds
• Thread size: 1/4-28
• Pin to pin length: 8" (closed) 11" (open)
• Body length: 4-3/4"
• Pin diameter: 1/4" 
• Weight: 5 ounces

Toggle Jaw with Splice Eye

*Dyneema Line not included with fittings

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Tubular Turnbuckle with Splice Eye

*Dyneema Line not included with fittings

C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 1/4" - 2-Pack

Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/16" diameter for 1/4" threads.

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 5/16" & 3/8" - 2-Pack

Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 3/32" diameter for 5/16" and 3/8" threads.

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 7/16" & 1/2" - 2-Pack

Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/8" diameter for 7/16", 1/2", and 5/8" threads.

Jaw/Jaw Tubular Turnbuckle - Short

For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.

Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. 

Specifications:

• Jaw with "T" Toggle Construction
• Machine swage
• Bronze body/ 316 stainless ends
• Wire size: 5/32"
• Breaking strength: 2,500 pounds
• Safe working load: 1,000 pounds
• Thread size: 1/4-28
• Pin to pin length: 6-1/2" (closed) 9-1/2" (open)
• Body length: 3"
• Pin diameter: 1/4" 
• Weight: 5 ounces

Shroud Cleat

Features:

• All stainless steel construction, compatible with you stainless steel rigging
• Will not corrode
• Easily attached to 5/32" thru 3/8" diameter wire or rod
• Ideal for flag, radar reflector and steaming shape halyards with an eye for attaching a snap shackle
• Low profile, projects only 1/2" from shroud

Single-Hook Anchor Chain Tensioner for 3/8" Chain

These fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.