Shop by Brand: Blue Sea Systems

• Displays amperage from -500 to +500 Amps
  
• Displays voltage from 0 to 60 Volts in 0.01 Volt increments
  
• High and low voltage, audio and visual alarms
  
• Standard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators
  
• 3 levels of display brightness
  
• Programmable sleep mode blanks display for power conservation
  
• Splashproof front
  
• Includes 500 Amp shunt
  
• Applicable for 12, 24, 32, 36, and 42 Volt DC systems

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Meters read both discharge and charge current
  
• Simple 2-wire connection from shunt - no other power required
  
• Meter senses and powers from shunt connection
  
• Includes appropriate DC shunt
  
• Backlit meter face

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• For use with AC Ammeters

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• For use with AC Ammeters

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8261 Waterproof Panel 8 Position - Slate Grey

Features:

• Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
• Designed for flybridge and open cockpit applications
• ON-OFF Contura Switches
• ON indicating LEDs embedded in switches
• Watertight mounting gasket included
• Countersunk mounting holes throughout
• Two-part polyurethane slate gray finish
• Industry standard height and width
• Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
• Completely wired and ready to install

Specifications:

• Weatherproof: Water Resistant
• Positions: 8
• Nominal Voltage: 12v / 24v
• Panel Cumulative Rating: 90A
• Switch Rating: 20A @ 12v DC / 15A @ 24v DC
• Height: 3.75"
• Width: 9.37"
• Depth: 3"

Included:

• (8) 5021 Panel Mount AGC/MDL Fuse Holder
• (1) 8214 Black 60 Label Set
• (8) 8230 Contura Switch SPST Gray - Off-On

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Contura Waterproof Bilge Pump Control Panel

Features:

• Designed for flybridge and open cockpit applications
• (ON)-OFF-AUTO Contura Switch
• Watertight mounting gasket
• Fuse holders accept commonly available AGC and MDL glass fuses
• "ON" indicating LEDs embedded in switch
• Completely wired and ready to install

Specifications:

• Weatherproof: Water Resistant
• Nominal Voltage: 12v / 24v
• Panel Cumulative Rating: 45A
• Switch Rating: 20A @ 12v DC / 15A @ 24v DC
• Height: 3.75"
• Depth: 3"

Included:

• (1) 5021 Panel Mount AGC/MDL Fuse Holder
• (1) 7944 Contura III Switch SPDT - On-OFF-(ON)
• (1) 8214 Black 60 Label Set

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• CE Marked
  
• Designed for flybridge and open cockpit applications
  
• ON-OFF Contura Switches
  
• "ON" indicating LEDs embedded in switch
  
• Watertight Mounting gasket
  
• Push Button circuit breaker with waterproof boot
  
• Rated IP66 - withstands water from heavy seas
  
• Ignition protected - safe for installation aboard gasoline powered boats

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Switches 3 - 230 Volt AC sources
  
• Includes 9011 heavy duty industrial rated switch
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Red reverse polarity LED indicators
  
• Green power available LED indicators
  
• Compact solution when circuit protection is provided elsewhere
  

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Switches 2 - 120 Volt AC sources
  
• Includes 9011 heavy duty industrial rated switch
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Red reverse polarity LED indicators
  
• Green power available LED indicators
  
• Compact solution when circuit protection is provided elsewhere
  

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• CE Marked
  
• Designed for flybridge and open cockpit applications
  
• ON-OFF Contura Switches
  
• "ON" indicating LEDs embedded in switch
  
• Watertight Mounting gasket
  
• Push Button circuit breaker with waterproof boot
  
• Rated IP66 - withstands water from heavy seas
  
• Ignition protected - safe for installation aboard gasoline powered boats

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• CE Marked
  
• Designed for flybridge and open cockpit applications
  
• ON-OFF Contura Switches
  
• "ON" indicating LEDs embedded in switch
  
• Watertight Mounting gasket
  
• Push Button circuit breaker with waterproof boot
  
• Rated IP66 - withstands water from heavy seas
  
• Ignition protected - safe for installation aboard gasoline powered boats

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Voltage 12/24v
  
• Amperage 100A
  
• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Voltage 12 VDC/24 VDC
  
• Amperage 100A
  
• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Switches between 2 - 120 Volt AC shore power sources and 1 - 240 Volt AC source to 2 -120 Volt AC load groups
  
• Includes 6337 heavy duty industrial rated switch
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Red reverse polarity LED indicators
  
• Green power available LED indicators
  
• Compact solution when circuit protection is provided elsewhere
  

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Voltage 12/24v
  
• Amperage 100A
  
• All positive, negative and grounding buses installed, fully pre-wired
  
• Panels with meters include toggle switch for mounting up to 3 battery banks
  
• All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Panel Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Red reverse polarity indicating LED
  
• All hot, neutral and safety ground buses installed, fully pre-wired
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• Maximum panel amperage - 50 Amperes
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Labels
  
• Over 500 individual Labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Red reverse polarity indicating LED
  
• All hot, neutral and safety ground buses installed, fully pre-wired
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• Maximum panel amperage - 50 Amperes
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Labels
  
• Over 500 individual Labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 120V AC
  
• 12/24V DC
  
• All AC and DC buses installed and fully pre-wired
  
• Label backlighting pre-installed
  
• ON - indicating LEDs installed in all circuit positions
  
• 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch
  
• Maximum panel amperage - 100 Amperes AC, 50 Amperes DCMIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Detailed installation instructions and cutout template included
  
• Countersunk mounting holes throughout
  
• Includes set of 60 common AC and DC Large Format Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• All hot, neutral, and safety ground buses installed, fully pre-wired
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• Maximum panel amperage - 100 Amperes
  
• MIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included
  
• Includes set of 30 common Large Format Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Double pole AC main circuit breakers with installed lockout slide
  
• Prevents connecting both AC sources simultaneously
  
• Maximum panel amperage - 50 Amperes
  
• Red reverse polarity indicating LED
  
• All hot, neutral and safety ground buses installed, fully pre-wired
  
• All circuit label positions are backlit on standard panels - No kit required
  
• "ON" indicating LEDs installed in all circuit positions
  
• MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Industry standard height and width
  
• Countersunk mounting holes throughout
  
• Detailed installation instructions and cutout template included

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Designed for twin engine configurations
  
• Provides 24 hour circuit protection
  
• Provides main DC circuit protection in addition to high ampere load protection
  
• Protects electronics from sags and spikes caused by engine cranking
  
• Allows emergency cross connect between isolated battery banks
  
• Isolates the Engine circuit from the House circuit
  
• Simplifies battery switch operation
  
• Allows independent battery discharge
  
• Addition of an Automatic Charging Relay automates charging both batteries
  
• Includes 4218 - Square Format Labels and 4140 - 24 Hour Round Labels

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Designed for twin engine configurations
  
• Provides 24 hour circuit protection
  
• Provides main DC circuit protection in addition to high ampere load protection
  
• Protects electronics from sags and spikes caused by engine cranking
  
• Allows emergency cross connect between isolated battery banks
  
• Isolates the Engine circuit from the House circuit
  
• Simplifies battery switch operation
  
• Allows independent battery discharge
  
• Addition of an Automatic Charging Relay automates charging both batteries
  
• Includes 4218 - Square Format Labels and 4140 - 24 Hour Round Labels

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Designed for twin engine configurations
  
• Provides 24 hour circuit protection
  
• Provides main DC circuit protection in addition to high ampere load protection
  
• Protects electronics from sags and spikes caused by engine cranking
  
• Allows emergency cross connect between isolated battery banks
  
• Isolates the Engine circuit from the House circuit
  
• Simplifies battery switch operation
  
• Allows independent battery discharge
  
• Addition of an Automatic Charging Relay automates charging both batteries
  
• Includes 4218 - Square Format Labels and 4140 - 24 Hour Round Labels

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Designed for twin engine configurations
  
• Provides 24 hour circuit protection
  
• Provides main DC circuit protection in addition to high ampere load protection
  
• Protects electronics from sags and spikes caused by engine cranking
  
• Allows emergency cross connect between isolated battery banks
  
• Isolates the Engine circuit from the House circuit
  
• Simplifies battery switch operation
  
• Allows independent battery discharge
  
• Addition of an Automatic Charging Relay automates charging both batteries
  
• Includes 4218 - Square Format Labels and 4140 - 24 Hour Round Labels

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9001e e-Series Battery Switch Selector 

Features:

• Make-before-break contact design allows switching between battery banks without power interruption
• CE Marked
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting
• Meets American Boat and Yacht Council (ABYC) requirements for battery switches
• 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
• 7/8" (22.22mm) stud length to accept multiple cable terminals
• Tactile textures indicate knob position by feel only

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9004e e-Series Battery Switch Single Circuit ON/OFF with Alternator Field Disconnect

Features:

• CE Marked
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting
• Meets American Boat and Yacht Council (ABYC) requirements for battery switches
• 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
• 7/8" (22.22mm) stud length to accept multiple cable terminals
• Tactile textures indicate knob position by feel only
• Includes AFD (Alternator Field Disconnect)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

L Solenoid Switch - 12-24VDC - 250A

Features:

• Hermetically sealed contacts / vaporproof
• Ignition protected - safe for installation aboard gasoline powered boats
• Activated by an ON-OFF switch mounted anywhere
• Integrated coil control minimizes heating and amperage draw
• 450 Amp Class
• Designed for 12 or 24 Volt systems
• Ignition protected -- safe for installation aboard gasoline-powered boats
• Activated by a low amperage ON-OFF switch mounted anywhere

Specifications:

• Control Circuit Connection: 20 AWG Tinned Wire
• Nominal Voltage: 12V DC / 24V DC
• Coil Function: Normally Open
• Mounting: #10
• Operating Amperage Current: 3.6A when changing state
• Amperage Operating Current: 0.13A @ 12 V / 0.07A @ 24 V
• Terminal Stud Torque: 90 in-lb (10.17 Nm)
• Continuous Rating: 250A Using 1/0 Wire Size / 300A Using 2/0 Wire Size / 400A Using 4/0 Wire Size / 450A Using 2 x (2/0) Wire Size
• Intermittent Rating: 275A (5 min) Using 1/0 Wire Size / 400A (5 min) Using 2/0 Wire Size / 500A (5 min) Using 4/0 Wire Size / 600A (5 min) Using 2 x (2/0) Wire Size
• Cranking Rating 30 sec: 1,000A / 1000A DC
• Contact Form: SPST-NO
• Input Voltage: 9-36V DC
• Inrush Rating: 0.25 sec (10 repeats): 2000A
• Switching Cycles: 1,000,000
• Terminal Stud: Serrated Flange Nut
• Terminal Stud Length: 0.66" (16.76mm)
• Terminal Stud Size: 5/16" (M8)
• Weight: 1.00lb (0.45 kg)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Material: Tin-Plated Copper
  
• Continuous Rating: 250 Amperes DC

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.