Shop by Brand: Ancor

16-14 AWG Nylon Double Crimp Butt Connectors - 100 Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

• Nylon insulated with insulation grip
• Funnel entry
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

16-14 AWG Nylon Single Crimp Butt Connector - 100-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

16-14 AWG Nylon Single Crimp Butt Connector - 25-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

16-14 AWG Nylon Single Crimp Butt Connector - 500-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength
  
• UL listed and CSA recognized

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire Range: 16-14/.197
  
• Size: 3-5mm/5mm
  
• Gender: Female
  
• Qty/Pkg: 100

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength
  
• UL listed and CSA recognized

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire Range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire Range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength
  
• UL listed and CSA recognized

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
  
• Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
  
• Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size.
  
• Shrinks at 257 deg. F/125 deg. C.
  
• Operating temperature range 40 deg. C to 110 deg. C.
  
• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire range: 16-14
  
• mm: 1-2

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire Range: 16-14/.250
  
• Size: 3.5mm/6.4mm
  
• Gender: Male
  
• Qty/Pkg: 100

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• .250 (6.4 mm) tab size
  
• Fits wire gauges 16-14
  
• Nylon insulated with insulation grip
  
• Double crimp, funnel entry
  
• UL 310

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• .250 (6.4 mm) tab size
  
• Fits wire gauges 16-14
  
• Nylon insulated with insulation grip
  
• Double crimp, funnel entry
  
• UL 310

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• .250 (6.4 mm) tab size
  
• Fits wire gauges 16-14
  
• Nylon insulated with insulation grip
  
• Double crimp, funnel entry
  
• UL 310

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

22-18 AWG - #6 Nylon Flanged Spade Terminal - 25-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• Double crimp, funnel entry
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

22-18 AWG - #6 Nylon Ring Terminal - 25-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• Double crimp, funnel entry
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

22-18 AWG - #8 Nylon Ring Terminal - 100-Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

Features:

• Nylon insulated with insulation grip
• Double crimp, funnel entry
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

22-18 AWG Nylon Double Crimp Butt Connectors - 100 Pack

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.

• Nylon insulated with insulation grip
• Funnel entry
• UL 486C

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief.
  
• Tinned for corrosion resistance.
  
• Pure copper for maximum current flow.
  
• Brazed seam for maximum strength.
  
• Wire Range: 22-18/.250
  
• Size: 0.3-0.8 mm/6.4mm
  
• Gender: Female
  
• Qty/Pkg: 100

  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength
  
• UL listed and CSA recognized

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Cross Linked polyolefin tubing is much stronger than PVC tubing and
  will not burn like PVC
  
• Heat activated adhesive lining provides impervious seal to salt water,
  oil, acids, and sunlight as well as providing strain relief
  
• Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
  
• UL Listed and CSA Recognized
  
• Highest shrink ratio - shrinks to 1/3 original size
  
• Shrinks at 257° F/125° C
  
• Operating temperature range 40° C to 110° C
  
• ANCOR heat shrink connectors offer heat activated adhesive built into
  the sleeve of the heat shrink tubing
  
• Shrinks to form a water tight seal and the ultimate vibration and strain relief
  
• Tinned for corrosion resistance
  
• Pure copper for maximum current flow
  
• Brazed seam for maximum strength

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.