Shop by Brand: BTI

The simplest, most accurate scope leveling system ever devised.

Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. The Level-Level-Level works because the scope is leveled to your receiver, not to the top of a scope base.

The makers of some scope leveling devices tell you that leveling your scope to the top of the base produces a level scope. Don't believe it! An accurate rifle requires level crosshairs, and the Level-Level-Level gives you the means to level your scope perfectly in only minutes.

Level your scope as you mount it on your rifle. The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle perfectly level. Then level the scope, tighten the rings, and the job is done.

Works with practically any bolt-action rifle, and is adaptable to other designs.

Precision machined unit
Designed in install, un-install or adjust front and rear dovetail sights
Fully captures and supports slide so it won?t deform
Works on all semi auto pistols
Large 4 post drive knob to easily push the sight
Reference marks for precise adjustments

FAT Wrench® with 10 Bit Set
Wheeler's FAT Wrench® brings perfect consistency to every screw on your rifle!

This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.

The FAT Wrench® is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

Patent: www.btibrands.com/patents

Torque adjustments range from 10 inch pounds to 65 inch pounds
Accuracy plus/minus 2 inch pounds
1/4"e; drive

Plastic Case Included

Bits Included: (click to order bit packs)

Leupold/Buehler windage bit
#10 flat blade bit
#11 flat blade bit
#32 flat blade bit
3/32"e; Allen bit
7/64"e; Allen bit
5/32"e; Allen bit
T15 Torx bit
T20 Torx bit
Square drive adapter bit


Length: 6"e;
Torque Adjustment Range: 10 inch lbs to 65 inch lbs
Quantity of Bits Included: 9
Drive Size: 1/4"e;
Accuracy: +/- 2 inch-lbs

89 Piece Professional Gunsmithing Screwdriver Set
Screwdrivers are the most important and most-used gunsmithing tools.

Wheeler's® Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell "e;C."e; Unlike other screwdriver suppliers,Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.

Keep your gun looking and operating as good as new!

Avoid costly damage that ruins the look and value of your guns!

Whether you're working on a Browning Superposed, a Remington 700, a Smith & Wesson® revolver, or a Colt Single Action, you'll find that there's a bit to fit every screw on your gun. The 54 Hollow-ground flat bits range in size from .120?x.020? to .360?x.070?, and includes doubles in the thinnest sizes. (Any gunsmith will tell you that you're occasionally going to break the ultra-thin bits on stubborn screws. This set includes two each of the very thinnest bits, which means you'll never be stuck in the middle of a job without the proper bit. Replacement bits are available in three packs for a very modest price.)

The set also includes a complete selection of Phillips, Allen, and Torx bits to cover scope rings, bases, recoil pads, and the like. The difference in the "e;basic set"e; and the "e;professional set"e; lies in the 15 ingenious "e;specialty bits"e; that are included in the "e;professional"e; set. These 15 pieces include all of the bits pictured below. These bits are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips.

Both sets come with two handles made from comfortable overmolded plastic. The first is a regular size handle that's good for most jobs, and the second is a slimmer, shorter "e;Close Quarters"e; handle that is good for finesse work with smaller bits.

Both sets also come in a durable custom box that's ready for the bench or your range kit.


Product Specifications

Case Size: 8"e;x12"e;x3"e;
Bit Material: S2 Tool Steel
Bit Hardness: 56-58 Rockwell C
Driver Handles: 2, with magnets
Extension: 1, 3? with magnet
Adapter: 1 Hex to square drive
Flat Bits: 54 Hollow-Ground
Allen Bits: 8
Phillips Bits: 4
Torx Bits: 3
Specialty Bits: 15

The-+Wheeler Engineering-+43 piece Professional Gunsmithing Screwdriver Set-+features the most popular-+bits-+for gunsmithing.-+ As any gunsmith will tell you, screwdrivers are the most important and most used tool on their bench.-+ These bits are made from S2 tool steel and hardened to 56-58 Rockwell "C".-+ Also featured on these bits is the Hollow-Ground design which has a gentle curve as it reaches the tip of the bit instead of being straight throughout the length of the tip.-+ This will protect the fit and finish of the screw and spread force equally along the sides of the screw slot so the head of the screw and the tip are not damaged.-+ The 43 piece screwdriver set features a very comfortable overmolded screwdriver handle to ease all or your work. Never lose a bit with the durable custom box that's ready for the bench or your range kit.