Shop by Brand: Uflex USA

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut

Features:

• Speed knob and nut included
• Polished stainless steel
• Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards

Specifications:

• Diameter: (inch) 13.5"
• 12mm Wheel Nut - 1.75mm thread pitch
• 3 spokes

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut - Black

Features:

• Speed knob and nut included
• All black, including the speed knob & chrome nut
• Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards

Specifications:

• Diameter: (inch) 13.5"
• 12mm Wheel Nut - 1.75mm thread pitch
• Material: Stainless steel
• 3 spokes

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob - Black

Features:

• Speed knob included
• All black, including the speed knob
• Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards

Specifications:

• Diameter: (inch) 13.5"
• Material: Stainless steel
• 3 spokes

*Note: Wheel nut is not included and is needed for installation 

1/4 NPT to 3/8 T-Fitting

Typical Application:

Fitting used in the back of the previous version of the UP series helms before the boss fitting

Specifications:

• 1/4 NPT to 3/8 COMP FITTING
• Helm Side = 1/4 NPT
• Hose Side = 9/16 - 24 UNEF 2A
  

45° Adjustable Fitting for Back of UP Series Helms

Typical Application:

Fitting for the back of the UP series helms

Specifications:

• ORB, Size #6 to 3/8 COMP FITTING
• Helm Side = 9/16 - 18 UNF 2A
• Hose Side = 9/16 - 24 UNEF 2A

90° 3/8 NI Plate Comp Fitting

Typical Application:

90° fitting from bulkhead fitting to 3/8" compression hose 

Specifications:

• 3/8 COMP FITTING
• Fitting Side =  9/16 - 24 UNEF 2B
• Hose Side =  9/16 - 24 UNEF 2A

90° Helm Fitting for UP Series

Typical Application:

Fitting for port/starboard line in the UP series helms prior to the boss fittings

Specifications:

• 1/4 NPT to 3/8 COMP FITTING
• Helm Side = 1/4 NPT
• Hose Side = 9/16 - 24 UNEF 2A

Boss Style T-Fitting - Nickel

Typical Application:

Fitting for back of helm in a dual station installation 

Specifications:

• ORB, Size #6 to 3/8 COMP FITTING
• Cylinder/Helm Side = 9/16 - 18 UNF 2A
• Hose Side = 9/16 - 24 UNEF 2A

Brass Compression Nut w/Sleeve #61CA-6

Typical Application:

3/8" Compression Nut with ferrule for cut to length nylon tubing

Specifications:

• 3/8 COMP NUT
• Fitting Side = 9/16 - 24 UNEF 2B
• Hose Side = 3/8 Compression Ferrule

Brass Plug w/O-Ring for Pumps

Typical Application:

Compensating line brass plug of the UP series helms

• 1/4 NPT PLUG
• Helm Side = 1/4 NPT

Complete Boss Fitting 

Typical Application:

Bleed fitting for all outboard cylinders

Specifications:

• ORB, Size #6 to 3/8 COMP FITTING
• Cylinder Side = 9/16 - 18 UNF 2A
• Hose Side = 9/16 - 24 UNEF 2A

Double Paddle Trim System

Double paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.

For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.

Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.

• Available both in single and dual versions (for either two equal or two different outputs)
• Both single or dual paddle can be positioned at various angles for the most confortable choice
• Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version)
• Max load 5 Amp @ 12VDC
• For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay
• Uflex® trim tabs require the use of the KTR - 42860S kit relay
• Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”)
• Easy to install on the following Ultraflex® steering systems:

- front and tilt mount hydraulic helms

- tilt mount mechanical helms

• Wiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

Fourtech 16' Black Mach Rotary Steering System with Helm, Bezel & Cable

Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. 

Kit Includes:

• T91 Helm
• X34 - 90° bezel
• M90 Steering Cable - 16'

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

Fourtech 17' Black Mach Rotary Steering System with Helm, Bezel & Cable

Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. 

Kit Includes:

• T91 Helm
• X34 - 90° bezel
• M90 Steering Cable - 17'

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

• T91 helm (PLANETARY GEAR DESIGN)
  
• X34 90° Bezel
  
• Highly Flexible M90 Mach cable

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System

For outboard single engine up to 115hp.

Kit Contains:

• UP18 - Intermediate helm pump
• UC81-OBF - Front mount outboard cylinder
• OL 150 - Hydraulic oil - 2 litres
• KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length