Shop by Brand: SmartPlug

30 Amp 50' Dual Configuration Cordset w/Soft Carry Case 

The SmartPlug 30 Amp Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. It is also the only shore power cord on the market which uses tinned copper wire throughout the entire length of the cable for the ultimate in corrosion resistance.

Features

• No adapters needed!
• SmartPlug connector on boatside end with twist-type plug on dockside
• Tinned copper wire throughout entire cordset for the ultimate in corrosion resistance.
• Power-on indicator light on boatside connector end
• Straight electrical contacts with 20x more contact area
• Weatherproof face seal on boatside connector end
• Multi-point locking system

Includes

• Dual Configuration Cordset
• User Manual
• Soft Carry Case

30 Amp 50' Dual Configuration Cordset w/Tinned Wire & 30 Amp Stainless Steel Inlet

The 30A 125V/250V cordset comes with a cool blue LED Power indicator light that glows when power is on. The 30A 125V/250V Marine cordset provides a super flexible cord that can be tightly coiled even in cold weather. The cordset is available in 25’ & 50’ lengths with the SmartPlug connector for the boat side and the industry standard twist-type connector for the marina power pedestal. SmartPlug marine cords have tinned wire to minimize corrosion.

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
  • Blue LED Power Indicator Light
  • Cordset Bag – Storage bag is included with cordset

30 Amp Boat & RV Side Connector

The SmartPlug 30 Amp Boatside Connector (BF30) is easily retrofitted onto the boatside end of your existing shore power cord. Simply cut off the old connector and replace it with the superior SmartPlug connector using the included instructions. Works with SmartPlug 30 Amp Boatside Inlet (BM30S).

Features:

• Pushes straight in, no twisting required
• Straight electrical blades with 20x more contact area
• Weatherproof seals
• Multi-point locking system
• 316 stainless steel side levers

Includes:

• 30 Amp Connector
• Installation tool
• Flanged cord seal
• Weatherproof Face seal

30 Amp Dual Configuration 50' Cordset w/Tinned Wire &Twist-Type Connector & 30 Amp Non-Metallic White Inlet

The 30A 125V/250V cordset comes with a cool blue LED Power indicator light that glows when power is on. The 30A 125V/250V Marine cordset provides a super flexible cord that can be tightly coiled even in cold weather. The cordset is available in 25’ & 50’ lengths with the SmartPlug connector for the boat side and the industry standard twist-type connector for the marina power pedestal. SmartPlug marine cords have tinned wire to minimize corrosion.

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light
• Cordset Bag – Storage bag is included with cordset

30 Amp Non Metallic Black Inlet - Boat & RV Side

SmartPlug’s 30A 125V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Gray or Black), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

30 Amp Non Metallic White Inlet - Boat & RV Side

SmartPlug’s 30A 125V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Gray or Black), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
  • Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
  • Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
  • Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

50 Amp 25' Dual Configuration Cordset w/Tinned Wire & Marina Park Power End

The 50 Amp 125V/250V cordset provides a weatherproof power solution. The cordset includes the safe and easy to use SmartPlug connector for the Boat Side and a Marina twist-type connector for the power pedestal. 

Features:

• Multi-Point Locking System - Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
• Weatherproof Seals - Multi-fin silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light– Dual LED bulbs
• Tinned Wire– All SmartPlug marine cords have tinned wire to minimize corrosion

50 Amp Boat & RV Connector

The 50A 125V/250V connector has been designed to be used with 3-wires (125V) or 4-wires (250V) in a single connector.  Our retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord plug on your RV/Boat 50A cord.  The connector has mechanical cord restraint, color coded wire guides, a water resistant cord seal and spring loaded side levers that automatically lock into the slots on the inlet housing.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weatherproof Seals – Multi-fin silicone gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration

50 Amp Boat & RV Inlet - Stainless Steel

SmartPlug’s 50A 125V/250V inlets have been designed to be used with 3-wires (125V) or 4-wires (250V) in a single inlet. The inlet connector provides 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Black or Gray), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

BF30 Repair Kit/Female Connector - Gasket Kit

Features:

• 30A Cordseal
• Stainless Mounting Gasket
• Instructions

BF30 Repair Kit/Female Connector - Service Kit

Features:

• Plug Body Front/Clamp Arms
• Face Gasket/End of Plug
• 30A Installation Tool
• 30A Cord Seal
• Instructions

BF32/BF50 Cord Seal Kit - 32A/50A Connector to 30A Cord Adapter

Features:

• 32A Cordseal
• Lid Gasket
• Internal Plug Screws
• Dish Soap

BF50 Repair Kit/Female Connector - Gasket Kit

Features:

• 50A Cordseal
• Stainless Mounting Gasket
• Instructions

BF50 Repair Kit/Female Connector - Service Kit

Features:

• Plug Body Front/Clamp Arms
• Face Gasket/End of Plug
• 50A Installation Tool
• 50A Cord Seal
• Instructions

BM30NT Repair Kit Inlet/Male Connector - Service Kit

Features:

• Inlet Sub - Assembly
• Stainless Mounting Gasket
• Non-Metallic Mounting Gasket
• Inlet Base and Lid Gasket
• Instructions

BM50S Repair Kit Inlet/Male Connector - Service Kit

Features:

• Inlet Sub - Assembly
• Stainless Mounting Gasket
• Non-Metallic Mounting Gasket
• Inlet Base and Lid Gasket
• Instructions

Combo Kit with ELCI Sensor & 30 Amp Breaker Non-Metallic Door - White

Features:

• White Sensor
• 30 Amp Breaker

Combo Kit with ELCI Sensor & 30 Amp Breaker/Stainless Steel Door

Features:

• Stainless Steel Sensor
• 30 Amp Breaker
• Electric Leakage Circuit Interrupter

Combo Kit with ELCI Sensor & 50 Amp Breaker Non-Metallic Door - White

Features:

• White Sensor
• 50 Amp Breaker

Combo Kit with ELCI Sensor & 50 Amp Breaker/Stainless Steel Door

Features:

• Stainless Steel Sensor
• 50 Amp Breaker
• Electric Leakage Circuit Interrupter

RV 30 Amp 30' Dual Configuration Cordset - Black (SPS X Park Power)

The 30A 125V RV cordset provides a weather resistant power cord solution for park power. The cordset is available in a 30′ length with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power pedestal. It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light

RV Kit 30 Amp 30' Dual Configuration Cordset - Black (SPX X Park Power) & Non Metallic Inlet - Black

The 30A 125V RV cordset provides a weather resistant power cord solution for park power. The cordset is available in a 30′ length with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power pedestal. It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Quick & Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes

RV Kit 30 Amp 30' Dual Configuration Cordset - Black (SPX X Park Power) & Non Metallic Inlet - White

The 30A 125V RV cordset provides a weather resistant power cord solution for park power. The cordset is available in a 30′ length with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power pedestal. It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Quick & Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes

RV Kit 30 Amp 30' Dual Configuration Cordset - Black (SPX X Park Power) & Stainless Steel Inlet

The 30A 125V RV cordset provides a weather resistant power cord solution for park power. The cordset is available in a 30′ length with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power pedestal. It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light
• Quick & Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes

Weathercap - Fits All 30 & 50 Amp Plugs

The SmartPlug Weatherproof Cover (A1001) protects SmartPlug boatside shore power connectors from moisture when not in use. Comes with a lanyard for tethering the Weatherproof Cover to a cordset.

Features

• Weatherproof seal
• Locks onto the face of a SmartPlug Connector
• Included lanyard tethers the cover to a cordset
• Works on all SmartPlug 30 Amp and 50 Amp boatside connectors

Includes:

• Weatherproof cover
• Lanyard