Anchor Hanger for Danforth Style Anchors Features:
|
Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8M The Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging. Specifications:
|
Clamp-On Furling Line Stanchion Lead Block - 1" Ball Bearing Delrin™ ball bearing sheave allows for quick and easy furling line adjustment. Stainless steel cage and strap ensure durability. Specifications:
|
Clear Step Lead Block for 1" Stanchions Unique design leads your furling control line outside of your stanchions for a clean lead aft to the cockpit. Stainless cheeks with Delrin(tm) ball bearing sheave ensure low-friction and high strength. Locks in place with a small set screw accessed through a small hole in the sheave. Specifications:
|
Exit Plate/Flat for up to 1/2" Line Specifications:
|
Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm 70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm), Requires (2) #10 Flat Head Fasteners. 1.5" (38mm) Centers. Matches Competitors Center to center measurements. |
15" Great Hawk For boats from 8m to 20m The Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally. Specifications:
|
Exit Plate/Flat for up to 3/4" Line Specifications:
|
Handi-Hanger Handi-Hangers are used in the cockpit or stern pulpit to organize line, fenders, life rings, hose etc. Use on 7/8" or 1" tubing, coated lifeline or remove the backing to mount on a bulkhead. |
Hawk Race for Single Handed Racing Dinghies The Hawk Race brings all the benefits of the Hawk Wind indicator with it's "V" jewel bearing and balanced vane arm. Mounts in a secure manor at gooseneck height in front of the mast. Designed primarily for larger single-handed Dinghies, the Hawk Race allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for both upwind and downwind reference. The Hawk Race is easily mounted and removed with a secure adjustable bracket. The aluminum support rod is easily bent to any angle required, but easily straightened if accidentally knocked. Specifications:
|
Hawk Wind Indicator for Boats up to 8M - 10" The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles. Specifications:
|
Investment Cast Pad Eye - 3" OD Base 316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications:
|
Little Hawk Mk 2 Wind Indicator The Little Hawk Mk 2 brings all of the benefits of the Little Hawk Mk 1 Wind Indicator and mounts it in a secure manor at gooseneck height in front of the mast. Designed for smaller single handed Dinghies, the Little Hawk Mk 2 allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for upwind and downwind reference. The Little Hawk Mk 2 is easily mounted and removed with a secure adjustable bracket. The aluminum support rod can be bent to any required angle, but is easily straightened if accidentally knocked. The complete unit removes for safe storage without any tools. The Little Hawk Mk 2 is very popular with Laser sailors. Specifications:
|
Little Hawk MK 1 For Dinghies up to 6m The Little Hawk Mk1 is a small, lightweight and robust Wind Indicator designed to be positioned at the top of the mast on dinghies up to 6m. Very popular with Optimists, the Little Hawk Mk1 is also ideal for any dinghy that wants accurate wind direction information with minimal weight and drag. The Vane Arm is made of super tough nylon is all but indestructible. The aluminum rod can be easily straightened if damaged or easily bent to any required angle. The whole unit is easily assembled straight from the box. Specifications:
|
Little Hawk Race Wind Indicator for Boats up to 8M The Little Hawk Race takes the ever popular Mk 1 Wind Indicator, cuts it to a minimal length and provides with a robust and lightweight mounting system. This gives the customer the lightest, least drag Wind Indicator on the market today. With its UV protection there will be no degradation in performance for many years. Ideal for all racing boats up to 8m. The mast clamp is screwed into the mast with two self-tapping screws (included). The Little Hawk Race is then pushed into place or removed easily. Specifications:
|
Mid-Rail Chock/Cleat Stainless Steel Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models. Specifications:
|
Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications:
|
Pulpit Furling Lead Spring Loaded Block - 1" Ball Bearing The Stainless Steel spring guarantees maximum support for the block. Delrin™ ball bearing sheave ensures low-friction lead for your furling line. Specifications:
|
Series 3 Flat Base/Alum Cheek/Delrin Sheave Delrin™ plain bearing sheave ensures smooth operation and high safe working load. Stainless Steel base distributes loads to a larger surface area. Specifications:
|
Series 5 Flat Base Cheek Block - Stainless Steel Cheeks Series 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area. Specifications:
|
Series 5 Flat Base/Alum Cheek/Delrin Sheave Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area. Specifications:
|
Series 7 Flat Base/Aluminum Cheek/Delrin Sheave Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area. Specifications:
|
Single Aluminum Block - 51mm Sheave Single block with anodized aluminum cheeks. Delrin™ sheave ensures smooth operation with high safe working load. Swivel head may be locked in place to avoid twist. Specifications:
|
Single Aluminum Block - 60mm Sheave Delrin™ sheave ensures smooth operation and a high safe working load. Swivel head may be locked in place to eliminate twisting. Specifications:
|
Single Ball Bearing Block Single block with aluminum cheeks and ball bearing sheave. Delrin™ ball bearing sheave ensures low-friction operation. Swivel head may be locked in place to avoid twist. Specifications:
|
Single Stainless Steel Block - 51mm Sheave Single block with stainless steel cheeks. Delrin™ sheave ensures smooth operation and high safe working load. Specifications: Sheave Dia. 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm) SWL 1750 lbs. (795kg) Weight 7.1oz (201g) Max Line 7/16" (11mm) |
Single Stainless Steel Block - 60mm Sheave Delrin™ sheave ensures low-friction and high safe working load. Swivel head may be locked in place to eliminate line twist. Specifications:
|
Small Opening Pre-Feeder Forged aluminum opening pre-feeder. Works with #5 and #6 luff tapes. Allows quick engagement of your luff tape at anytime. |
Spring Loaded/Lined Slide/Aluminum for 1" T-Track Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment. Specifications:
|
Spring Loaded/Lined Slide/Aluminum for 1-1/4" T-Track Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment. Specifications:
|
Spring Loaded/Lined Slide/Stainless Steel for 1-1/4" T-Track Delrin™ sheave ensures smooth operation and high safe working load. Stainless Steel cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment. Specifications:
|
Stainless 1-1/4" T-Track Slider - Eye Slide/Lined Specifications:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |