Shop by Brand: Rod Saver

Bait & Spinning Reel Wrap

Harsh elements can take years off the life of a reel. Keep the dust dirt and the sun's rays off any bait-cast or spinning reel with the only reel wrap on the market that eliminates the need to break down your rod. It's unique design fits both spinning and bait cast reels.

Battery/Gas Tank Tie-Down - 48"

A 48" long polypropylene belt with two nickel coated steel footman loops and a super lock quick release buckle for easy tightening. Will hold gas tanks or batteries securely.

Deluxe Stainless Steel Transom Tie-Down - 2" x 3' - Pair

This stainless steel deluxe 2" x 3' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made stainless steel S Hooks for saltwater applications. 1,200 lbs. - sold in pairs.

Deluxe Trailer Tie-Down - 1" x 3' - Pair

TTD/Overcenter – this is a 1”x3' version of our finest over-center locking buckle with wrap around protection. Perfect for smaller and lighter aluminum boats. Features two zinc chromate S Hooks. 700 lb. capacity. 

Deluxe Trailer Tie-Down - 2" x 2' - Pair

This deluxe 2" x 2' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 1,700 lb. capacity - sold in pairs.

Deluxe Trailer Tie-Down - 2" x 4' - Pair

This deluxe 2" x 4' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 1,700 lb. capacity - sold in pairs.

Dock Saver Dock Tie-Down

The Dock Strap Tie-Down is simple, quick and easy. Simply place the loops over the dock and boat cleats, quickly tighten the slack with the thumb lever cam buckle and you are done. No knots, no tangled ropes. Adjustable from 2' to 10'.

Emergency Tow Strap - 10,000lb Capacity

This emergency tow strap is a must have if your boat becomes inoperable. The fluorescent orange bag for storage can also be used to wave down help or as a backup if you're required to have an orange flag for towables. We've taken 2" wide 10,000 lb. test yellow webbing and attached 2 10,000 lb. drop forged hooks 30' long for a marine tow strap. 10,000 LB capacity. For marine use only.

Fender Wrap

No more knots - tying or untying fenders - simply tie the fenders off one time for your boat and your done. Attach or Detach fenders in a matter of seconds. Fast and easy hook & loop make a secure connection while docked or in transit. Speed tested so there's no worry.   

Fishing Rod Sock - 57"

This 57" Nylon Rod Sock slides easily over Rods and is secured by an adjustable Velcro strap. Universal Length fits most rods. 

Flat Foot Recessed Tray for Minn Kota Foot Pedals

This recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Flat Foot Recessed Tray for MotorGuide Foot Pedals

This recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Flat Foot Recessed Tray for Wireless Foot Pedals - Minn Kota or MotorGuide

This low profile recessed pan is specifically designed for the Minn Kota and MotorGuide Wireless Foot Pedal Control. It is made of durable 1/8" aluminum with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions. 

Inside measurements: 15-1/4"L X 11-3/4"W X 1-5/8"H.

Heavy-Duty Ratchet Trailer Tie-Down - 2" x 3' - Pair

This heavy duty 2” x 3' ratchet tie-down is ideal for medium to large runabouts, pontoons or cuddy cabins. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 2,400 lb. capacity - sold in pairs. 

Heavy-Duty Ratchet Trailer Tie-Down - 2" x 5' - Pair

This heavy duty 2” x 5' ratchet tie-down is ideal for medium to large runabouts, pontoons or cuddy cabins. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 2,400 lb. capacity - sold in pairs. 

Heavy-Duty Winch Strap Replacement - Yellow - 2" x 20'

A 2"x 20' Wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook.

Heavy-Duty Winch Strap Replacement - Yellow - 2" x 25'

A 2"x 25' Wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook.

Heavy-Duty Winch Strap Replacement - Yellow - 3" x 20'

A 3" x 20' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook. For use on 3" wide winch strap drums.

Heavy-Duty Winch Strap Replacement - Yellow - 3" x 25'

A 3" x 25' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook.  For use on 3" wide winch strap drums.

Heavy-Duty Winch Strap Replacement - Yellow - 3" x 30'

A 3" x 30' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook.  For use on 3" wide winch strap drums.

Original 10" & 6" Set 

The Original Rod Saver 10 Inch & 6 Inch Strap is the most popular model.  10" strap for the handle end of the rod and 6" strap for the tips.  Holds up to 6 rods.  Includes stainless steel mounting hardware.

Original Rod Holder 10" Single Strap

The Original Rod Saver 10 Inch strap is still hard to beat when it comes to keeping fishing rods in the boat and out of the water. This single strap model includes stainless steel mounting hardware

Original Rod Holder 8" & 6" Set - Double Strap

The Original 8 Inch and 6 Inch strap is our smallest set of 2 straps.  8 Inch strap for the handle end of the rod and the 6 inch strap for the tips.  Holds up to 4 Rods.  includes stainless steel mounting hardware.

Paddle Bucket Trailer Tie-Down - 1" x 4' - Pair

This is a 1" x 4' economical tie-down with protective pad and hook and loop closure for smaller boats. Features two zinc chromate S Hooks. It includes a webbing pad sewn behind the buckle to protect the boat finish. 750 lb. capacity.

Paddle Buckle Trailer Tie-Down - 2" x 6' - Pair

This 2" x 6' popular tie-down system is made with a 2” paddle buckle, polypropylene belt and protective pad with hook and loop closure for boat protection. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 1,000 lb. capacity - sold in pairs.

Paddle Buckle Trailer Tie-Down with Vinyl Pad - 2" x 4' - Pair

This 2" x 4' popular tie-down system is made with a 2” paddle buckle, polypropylene belt and protective pad with hook and loop closure and vinyl pad for additional boat protection. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 1,000 lb. capacity - sold in pairs.

Poly Rod Strap

The Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most chemicals.

Portable Side Mount with Dual Lock 4 Rod Holder

The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 4 Rods.

Portable Side Mount with Dual Lock 6 Rod Holder

The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 6 Rods. 

Portable Side Mount with Dual Lock 8 Rod Holder

The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.

 Power Pole Cover f/Pro Series & Sportsman 8' Models Only

Power Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.