Shop by Brand: Maxwell

Rode Counter

Auto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode.

• Rode length monitoring from the helm.
  
• Large LCD display with adjustable red back lighting shows length of anchor rode deployed.
  
• Display in feet or metres.
  
• Docking alarm warns skipper when anchor is close to docking.
  
• Easy set up with pre-programmed calibrations for rope/chain ropes.
  
• Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations.
  
• Works on 12 or 24V DC.
  
• Standard 60mm (2.36) marine instrument console.

Maxwell AA560
Panel Mount Windlass Controller and Rode Counter

• Preset stopping point on retrieval
• One-touch function to deploy and retrieve a preset length of rode
• Adjustable back lit display in feet, metres or fathoms
• Graphic LCD screen featuring intuitive user interface for simple operation
• Displays windlass speed and direction, plus battery voltage
• Safety lock to help protect against accidental windlass deployment
• Logs windlass operation hours to help ensure regular windlass maintenance

Anchor Rode - 15'-1/4" Chain to 150'-1/2" Nylon Brait

15' of 1/4" HT spliced chain to 150' of 1/2" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14

Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait

15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14

Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait

18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and

energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines

Construction: 8-strand Nylon

Specific Gravity: 1.14

Anchor Rode - 20'-3/8" Chain to 200'-5/8" Nylon Brait

20' of 3/8" HT spliced chain to 200' of 5/8" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait

20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14

Anchor Rode - 25'-3/8" Chain to 250'-5/8" Nylon Brait

25' of 3/8" HT spliced chain to 250' of 5/8" Nylon Brait rope

Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.

Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14

ANCHOR SWIVEL SHACKLES

The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers.

ANCHOR SWIVEL SHACKLES

The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers.

Anchor Tensioner 7-12mm

Features:

• Pulls anchor tight to keep it snug in the bow roller
  
• Takes weight off the windlass and prevent accidental deployment of anchor
  
• Cam action offers up to 150kg of tension with minimal effort
  
• No need to drill holes - uses existing cleat or bollard
  
• Huge 500mm of adjustability
  
• Self locking lever with quick release pin for added peace of mind
  
• Fits 7-12mm (1/4"-1/2") chain

ANCHORMAX™ Windlass

Features:

• Has an extremely high power to weight ratio
  
• ompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor
  
• Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft)
  
• Fitting to the boat is simplicity itself as no dismantling of the winch is required
  
• Gear housings are marine-grade alloy and the drum is stainless steel
  
• Supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions
  
• Not recommended for use to haul halyards
  
• Not recommended for use to haul chain

Note: Each winch is supplied as a single direction (clockwise) fully tested unit complete with fitting instructions, deck switch, templates and fastenings.

STANDARD EQUIPMENT

• Footswitch

SPECIFICATIONS
Maximum Line Pull	386kg (850lb)
Speed @ nominal working load	24m/min (76ft per min) (80 amps with 100kg/220lb load)
Voltage	12v
Power	600w
Weight	8kg(17.6lb)
Maximum Boat Load	10m (33ft)
Max. Boat Weight	4 Tons

Bearing Kit 300-3500

Spare gearbox bearing kit for Maxwell VC1000 windlass. Kit includes: (2) 1" ext circlip, (1) 12 x 28 x 8 ball bearing, (1) 25 x 12 x 47 ball bearing.

Bolt - Hex HD 5/16" UNC x 1-1/2"

SS304

Bush 1/2" Nylon

Features:

• 1/2" Nylon
• 741 330B

Circlip - 1-1/2" Stainless Steel

• 1-1/2"
• Stainless Steel

Circlip Extension 1-1/8" Stainless Steel - 3100-112-SS2

Features:

• 1-1/8"
• Stainless Steel

Clutch Nut RC8 Freedom - 500/800

Features:

• Replacement clutch nut for Freedom rope / chain windlass

Specifications:

• Maxwell Model No. 4376

Dual Install T Junction Connector

AA560 Dual Install T Junction Connector

Extendable Hinged Bow Roller

Extendable Hinged Bow Rollers have a hinged base which allows for shorter or longer overall extension.

Extendable Hinged:

• A - 198mm (7-13/16")
  
• B - 125mm (4-15/16")
  
• C - 73mm (2-7/8")
  
• D - 101mm (4")
  
• H - 75mm (2-15/16")
  
• H1 - 239mm (9-3/8")
  
• L - 527mm (20-1/4")

Fixed Bow Roller - Size 1

Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.

Size 1:

• L - 205mm (8-1/8")
  
• B - 72mm (2-7/8")
  
• H - 74mm (3")
  
• C - 44mm (1-3/4")

Fixed Bow Roller w/Loop

Maxwell also featurs a Fixed Bow Roller with an Anchor Loop.

Fixed with Loop:

• A - N/A
  
• B - 134mm (5-1/4")
  
• C - 75mm (3")
  
• D - N/A
  
• H - 65mm (2-9/16")
  
• H1 - 155mm (6-1/8")
  
• L - 460mm (18-1/8")

Foot Switch & Cover - Stainless Steel

Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.

Features:

• Rated at 150 amps and suitable for 12V or 24V applications
• Nickel-plated copper contacts ensure corrosion-free, reliable operation
• Polished stainless steel bezel and cover

Pressure Arm Upgrade Kit

Made specifically for Maxwell's Freedom Series of Windlasses.

Freedom Shaft Service Kit

Maxwell shaft service kit for Maxwell Freedom series windlasses.

Gearbox Key

Maxwell Windlass Gearbox Key 3150

9.53X, 9.53X67 ST ST

Hinged Bow Roller - Size 1

Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.

Size 1:

• L - 320mm (12-5/8")
  
• B - 92mm (3-5/8")
  
• H - 72mm (2-7/8")
  
• h - 133mm (5-1/4")
  
• C - 44mm (1-3/4")

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with Capstan

Designed for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.

Kit Includes

• Windlass
  
• On/Off Breaker Panel
  
• Reversing Solenoid
  
• Up/down Panel Switch
  
• Clutch Release Handle

Features

• The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass
  
• Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope.
  
• The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope.
  
• The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  
• Case Material: Anodized Aluminum
  
• The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
  
• This two piece watertight case allows for quick and easy, on-deck,routine maintenance.
  
• Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up.
  
• The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
  
• The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
  
• The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
  
• High quality Stainless Steel chainwheels
  
• The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
  
• The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker.
  
• Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required.
  
• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
  
• Exclusive Maxwell 3 YEAR Limited Warranty


Specifications


• Maximum PUll: 1540 lbs
  
• Chain Short Link: 5/16" or 8mm
  
• Chain Speed (Anchor Retrieval): 79 ft per Minute
  
• Rope Speed (Anchor Retrieval): 65 ft per Minute
  
• Rope Size (Nylon 3 strand or 8 Plait): 5/8"
  
• Power Supply (DC): 12VDC
  
• Motor Power: 1000 Watts
  
• Net weight: 42 lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope

Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Features:

• Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  
• 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
  
• 2-piece watertight case allows for quick and easy, on-deck, routine maintenance
  
• Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
  
• Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
  
• Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters
  
• Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
  
• The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
  
• The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  
• Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
  =
• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.

HRC6

• Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
• Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
• Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
• High efficiency spur gearbox incorporating a robust non-backwind mechanism
• High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
• Emergency "free fall" function in the event of onboard power failure
• Revolutionary new chainwheel - see over
• Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
• Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
• Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
• Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection

Specifications:

• Model: HRC6
• Maximum Pull: 900lbs
• Chain Short Link: 1/4"
• Rope Size (Nylon): 1/2"
• Line Speed(Anchor Retrieval): 108'/min
• Power Supply(DC): 12V or 24V
• Motor Power: 600W
• Net Weight: 25lbs

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.

HRC8

• Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
• Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
• Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
• High efficiency spur gearbox incorporating a robust non-backwind mechanism
• High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
• Emergency "free fall" function in the event of onboard power failure
• Revolutionary new chainwheel - see over
• Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
• Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
• Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
• Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection
• Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle

Specifications:

• Model: HRC8
• Maximum Pull: 900lbs
• Chain Short Link: 5/16"
• Rope Size (Nylon): 9/16"
• Line Speed(Anchor Retrieval): 108'/min
• Power Supply(DC): 12V
• Motor Power: 600W
• Net Weight: 25lbs