1.2-Liter Pump Kit Use Garmin's 1.2 Liter per minute (0.32 gallon per minute) pump kit with your Reactor™ 40 system to pump hydraulic fluid to the steering cylinders and steer the boat. Improved with ORB hydraulic ports and threaded cable collars for increased durability. In The Box
|
10" Protective Cover - Plastic Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.
|
12" Protective Cover - Magnetic Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this magnetic protective cover.
|
12" Protective Cover - Plastic Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.
|
12-Pin To Dual 4-Pin Transducer Y-Cable
Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.
|
12-Pin Transducer Y-Cable Connect a port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
|
16" Protective Cover - Magnetic Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this magnetic protective cover.
|
16" Protective Cover - Plastic Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.
|
2-Pin Power Cable
Use Garmin's 2-pin power cable with your GPSMAP® 4xxx Series or GPSMAP® 5xxx Series. Compatible Devices:
|
20' Marine Network Cable, RJ45
|
Plastic transom mount transducer with depth and temperature. Operating frequency of 200 and 50 kHz. Beamwidth of 15 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.
|
Transducer Extension Cable
Use this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit. Compatible Devices:
|
4-Pin Female to 5-Pin Male NMEA 2000® Adapter Cable for echoMAP™ CHIRP 5Xdv
Connect your compatible 5-inch echoMAP™ CHIRP chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable.
|
4-Pin Transducer to 12-Pin Sounder Adapter Cable Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.
|
4-Pin Transducer to 8-Pin Sonar Port Connect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.
|
40 foot marine network cable - RJ45
|
NMEA 2000 right angle cable
|
6-Pin Female to 8-Pin Male Adapter
This adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.
|
8-Pin Female to Wire Block Adapter Garmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.
|
8-Pin Trnasducer Extension Cable- 10'
Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.
|
8-Pin Transducer Extension Cable - 30'
Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable.
|
8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
|
8-Pin Transducer to 4-Pin Sounder Adapter Cable Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable. Compatible Devices:
|
9-Axis Heading Sensor
Premium solution for exceptional heading accuracy. The 9-axis heading sensor is the premium solution that is easy to install and provides fast calibration and exceptional heading accuracy. Features:
Accurate Heading Even at Low Speed Its heading output at 10 Hz and accuracy of plus or minus 2 degrees ensures your chart orientation and boat heading line match up with reality, even at lower speeds. It also allows for MARPA tracking and improves radar overlay experience. Effective in Rough Waters You can also be confident your heading information will remain accurate, even in rough sea conditions where your bow is pitching and rolling or - in sailboat applications - when heeled over. Provides heading and rate-of-turn output at 10 Hz and trim and heel output at 1 Hz. Easy Installation, Fast Calibration The 9-axis heading sensor installs easily with NMEA 2000® plug-and-play interface and a simple 2-step precision calibration process for compatible Garmin chartplotters. For displays other than Garmin, basic calibration is also supported. The heading sensor's 9-axis MEMS technology allows installation in any orientation located away from magnetic interference. All of our heading sensors are built to withstand bilge environments. In The Box:
|
Active Speaker Connect your compatible VHF radio to a handset for on-board communication. The active speaker has a knob to adjust volume up or down as needed on the compatible handset.
|
Actuator Power Cable
10" x 7" x 2" actuator power cable
|
Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin
010-10182-01 Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise.
|
AIS™ 800 Blackbox Transceiver **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Help Avoid Running into Trouble on the Water
Increase your situational awareness and confidence on the water with the Garmin AIS 800 transceiver. It has 5 watts of transmit power and provides faster position reporting than ever before¹. It transmits your vessel information to other AIS receivers in your area while it receives their AIS target data. Garmin AIS 800 has an internal VHF antenna splitter, which allows the VHF and AIS to share a single antenna. It includes a built-in GPS (with connector for optional external antenna) and integrates seamlessly into the Garmin onboard system. The transceiver features NMEA 2000 connectivity for easy integration with compatible chartplotters and multifunction displays. And it’s all packed into an easy-to-install black box unit with a small footprint. In The Box
¹When cruising above 14 knots
|
Class B Compact Drive Unit
The Class B Compact Drive Unit works with the GHP™ 12 marine autopilot system to control your sailboat's steering system. This device is designed for use with sailboats with up to 48,400 lbs of displacement. Compatible Devices:
|
B117 Bronze Thru-Hull Depth/Temp - 8-Pin This bronze thru-hull mount transducer performs well at high speeds. An excellent choice for fiberglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required
|
Airmar B150M
w/0° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Entry Level Chirp Solution. Provides good depth capability and good target separation. Max Depth - 1,500' Suppoarted Deadrise/Transom Angles - 0-7° Deadrise
|
Airmar B150M
w/12° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Entry Level Chirp Solution. Provides good depth capability and good target separation. Max Depth - 1,500' Suppoarted Deadrise/Transom Angles - 8-15° Deadrise
|
|
|
|
|
Copyright © 2009-2023 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |