Shop by Brand: FLIR Systems

AX8™ Marine Thermal Monitoring System

Gain an entirely new view of your vessel's mechanical system with the FLIR AX8 thermal monitoring camera. Combining thermal and visible cameras in a small, affordable package, the AX8 integrates with Raymarine multifunction displays (MFDs) and sends audible and visual alerts when the temperature of machine parts rise above preset thresholds.

Keep a watchful eye on such critical equipment as engines, exhaust manifolds, and shaft bearings and spot problems before they leave you stranded on the water. And FLIR's exclusive MSXr imaging blends visible and thermal images for more detailed imagery that is easier to understand.

Spot Potential Problems Before They Happen
State-of-the-art thermal monitoring of engines and onboard machinery. Powered by Lepton, FLIR's most advanced micro thermal camera. Exclusive Multi-Spectral Dynamic Imaging (MSX®) for easy-to-understand thermal imagery.

On Board Thermal Alarming & Visual Analysis
Stream live thermal video of exhaust manifolds, propeller shafts, electrical panels, and other machinery. Program specific areas to generate automated spot alarms when temperatures exceed pre-set thresholds. Evaluate ongoing temperature trends. Help avoid costly repairs and unwanted breakdowns.

Raymarine Integration
View thermal, visible, and MSX video imagery on Raymarine LightHouse IIT MFDs. Continuous thermal monitoring with audible and visual alarms across the Raymarine network. Connect up to eight AX8 cameras using Ethernet
View and record thermal video and snapshots from any Raymarine display on the network. Easy setup and alarm programming with a PC and web browser.

Ethernet Cable for M-Series - 100'

FLIR's 100' Ethernet Cable is for connecting the FLIR M-Series Cameras to the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 100' long

Ethernet Cable for M-Series - 25'

FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 25' long

Ethernet Cable for M-Series - 50'

FLIR's 50' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 50' long

Ethernet Cable for M-Series - 75'

FLIR's 75' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 75' long

Free Standing Mount

Optional FLIR Free Standing Mount for FLIR's AX8™.

IP To Analog Video Decoder

IP to Analog Video Decoder converts IP video signal from camera to analog composite signal.

Features:

• IP to Analog Video Decoder
• Converts IP video signal from camera to analog composite signal

FLIR is the global leader in Infrared cameras, night vision and thermal imaging systems. The products play pivotal roles in a wide range of industrial, commercial and government activities in more than 60 countries.

JCU-2 Joystick Control Unit & POE Injector Kit

JCU-2 Joystick Control Unit

The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus.

Includes 

• Joystick Control Unit (JCU2)
• Mounting hardware

Power Over Ethernet Injector - 12V

FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

Includes:

• JCU-2 keypad
• Keypad mat
• Mounting gasket
• 4 x mounting screws, rubber washers, mounting clamps
• Cable gland nut
• RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft)
• Documentation pack 
• POE injector

JCU-2 Joystick Controller

The joystick is the primary control for the M400 & M400XR and the M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus.

Includes: 

• Includes:
  • JCU-2 keypad
  • Keypad mat
  • Mounting gasket
  • 4 x mounting screws, rubber washers, mounting clamps
  • Cable gland nut
  • RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft)
  • Documentation pack 

JCU3 Compact Joystick for M100/200 - Raymarine RayNet Network

FLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces.

The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard.

The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200, M400, M-Series, MD-Series as well as Raymarine T200, T300and T400 camera systems.

MD-625 Thermal Night Vision Camera

This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series' display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space.

Now even small boats can see clearly at night with the MD-Series Fixed Mount Thermal Night Vision Camera from FLIR.

Fast-moving crafts will appreciate the enhanced long-range performance of the MD-625 camera with a high-resolution 640 x 480 thermal imager and 25mm lens. The MD-625 has a 2X and 4X digital zoom for enlarging distant targets & 30 Hz refresh for smooth, clear images.

The MD-Series delivers stunning detail and clarity day or night thanks to its state-of-the-art FLIR thermal imaging technology. The camera can easily detect floating objects, navigation aids, other vessels, and even people in the water with ease.

Engineered for smaller cruising, fishing and sailing vessels, MD-Series is both compact and lightweight. The camera measures 5.9" in diameter and just 7" high. The small footprint allows the camera to easily mount on any T-top, cabin roof, radar arch or mast.

Features:

• 640 x 480 resolution
  
• 4x e-zoom
  
• Ethernet-enabled for simple integration into your current electronics
  
• Slim profile (7" high and only three pounds) makes for an unobtrusive mount

Click here for information on exporting FLIR products.

Power Over Ethernet Injector - 12V

FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

RJ45 Waterproof Connector

FLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord.

FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.

Weather Cover for Joystick Control Unit

FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover.

Features:

• Protective covering
  
• Protects the electronics of your Joystick Control Unit (JCU)
  
• Guards against moisture, salt and other irritants found in marine environments