Shop by Brand: Clipper

The AIS Engine 3 is supplied with a free copy of `SeaClear' and a trial version of Software on Board. A data cable to connect to the 9 pin serial port of a PC and a 12 volt power cable
The AIS Engine 3 and a conventional marine antenna are all you need to start plotting vessels on your PC or AIS compatible plotter. The software runs in windows 95, 98, ME, XP, 2000, NT and Vista, it includes a world map on which vessels are plotted. Any vessel on the screen can be selected and its AIS data displayed. This includes the vessels name, MMSI number, position, call sign and destination etc. Also included on the AIS Engine is an optional input for a GPS (RMC sentence). With this connected the users own vessel is shown on the chart with its latitude and longitude displayed in a window.

The unit can receive ships on either the A or B AIS channels. In default setting it alternates between the two channels.

The AIS engine can also be used with plotters or other PC software that have an AIS input facility. Check compatibility with your software supplier. An NMEA 0183HS input at 38,400 baud is required to accept the VDM AIS strings corresponding to ITU-1371.

If your PC does not have a spare 9 pin serial port a low cost serial to USB converter is available as an optional extra.

Technical Data:

• Operating frequencies - 162.025 and 161.975 mHz
  
• Supply voltage - 10 to 16 volts DC
  
• Supply current - 43mA
  
• All class A and B AIS Messages relayed
  
• Antenna input - 50 ohm BNC
  
• Data connector - 9 pin 'D' type
  
• Mounting - via two moulded flanges
  
• Dimensions - 115 x 100 x 30mm
  
• Output format - NMEA 0183 (38400 Baud)
  
• VDM encapsulation string conforming to ITU-1371
  
• NMEA RMC from GPS
  
• Supplied with Software, fused power cable and data cable
  (Various receiver parameters are factory preset but can be altered from the PC if software is available.)

AIS Plotter/Radar - Requires GPS Input & VHF Antenna

The Nasa Marine AIS SART Plotter is the first stand alone AIS receiver / plotter specifically designed for the leisure boat market.

The unit consists of a dual frequency AIS receiver, demodulator, signal processor and a backlit matrix display. It receives an NMEA input (RMC) from the boats GPS which puts the user at the centre of a radar style screen. A COG pointer is selectable by the user. All AIS carrying vessels and SART transponders are displayed with bearing and range relative to the user. Any vessel on the screen can be selected by the user. The selected vessel is highlighted and its data displayed on the right of the screen. This data includes the vessel’s MMSI number, name, course over ground, speed over ground, range, latitude and longitude.

The display, with ranges of 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 and 32 nautical miles shows AIS carrying vessels and SART transponders in a format normally associated with conventional radar. A trail of previous positions clearly shows the relative track of all the targets on the screen. A box to the right of the screen displays the speed over the ground, the vessel name, mmsi number and the latidude and longitude of any target selected by the user.

As each vessel leaves a trail of previous positions the user can instantly see its relative position and bearing. Should any vessel cause concern (particularly if there is a risk of collision) it can be selected and its AIS data displayed. The MMSI number is immediately available so, in the last resort, a DSC call can be made directly to that vessel. If the user selects his own vessel then the screen repeats the users GPS position, course and speed over ground.

Each vessel’s status is shown by a different symbol so the user can see if a vessel is underway, at anchor, fishing etc.

The compact unit has a white backlit LCD display, operates from 12 volts and consumes little power.

*AIS SART Plotter is an AIS receiver only and does not transmit AIS data. It should not be confused with an AIS transponder.

Specifications:

• Ranges 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 and 32 Nautical Miles
• Receives class A, B and SART AIS transmissions
• Tracks up to 30 vessels
• Uses standard Marine VHF antenna
• 161.975 and 162.025 MHZ operation
• Uses standard NMEA0183 GPS input
• High contrast display with white backlight
• Supply voltage 12 – 15v DC
• Consumption 50mA @ 12v
• (100mA with backlight)
• Optional stirrup mount bracket available
• Dimensions – width 150mm,
• Height 112mm, Depth 42mm

The BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.

Specifications:

• 
  
• Supply voltage: 8-16 volts DC
• Supply current: 3 milliamps
  
• Battery capacities: 5-600 AMP Hour
• Load Current: 100 Amps Max
  
• Charge Current: 100 Amps Max
• Shunt: Standard 50 millivolt @ 100 Amp

Cables Supplied:

• 
  
• 100 Amp shunt link to M8 Ring terminal.
• 5 meter from display unit to battery - fused and fitted with ring terminals for shunt, fuse holder, and M8 ring terminal to battery.

Display Unit:

• 
  
• Standard 110m squre clipper case. High contrast LCD, backlit for night viewing.
• Minimum voltage visual alarm
  
• Simple operation: 4 keys to select backlight, Volt/Amp/State of charge screen, AMP hours or time to run.

Bluetooth Battery Monitor

When you need a battery monitor but don't have space for the display or routing thecables would be a nightmare, there is now a solution. The BM-1(BT) will monitor yourboat or caravan's lead-acid batteries and transmit the data directly to your mobile phone,or tablet, wirelessly by bluetooth.
A simple Android app, freely available from the nasamarine.com website or Google PlayStore, (requires Android V4.3 or later) shows your service battery voltage, current flowingin or out, state of charge and time to charge or discharge the battery. An audible alarmwarns if the battery level gets dangerously low. It will also show the starter batteryvoltage. For apple users a more sophisticated app, with additional features can bepurchased from the Apple app store. Compatible with iPhone, iPad and iPod touch.Offers Apple Watch App for iPhone. (Requires iOS 9.0 or later)
The monitor, which draws a meagre 2 mA, is supplied with a 100 amp shunt and a premadecable assembly to simplify connection to your service battery.

Compact battery monitor, just 124 x 62mm x 23mm!

Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.

Caravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation.

The unit continually monitors the voltage, the current (charge or discharge) and calculates the state of charge together with the time remaining to charge or discharge the battery.

This information can lead to a more efficient use of the battery enhancing its life and reducing the risk of failure.

Operation is very simple. One screen displays the voltage, current (charge or discharge) and a bar graph showing the remaining capacity. A flashing alarm is also included to warn if the capacity is getting too low. A second screen shows the remaining time available at the current charge/discharge rate together with the remaining capacity in both analog and digital format.

The BM1 Compact consumes a miserly 1.5mA!

Clipper BM-2 Battery Monitor

The BM-2 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 200 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.

Specifications:

• 
  
• Supply voltage: 8-16 volts DC
• Supply current: 1.5 milliamps
  
• Battery capacities: 5-600 AMP Hour
• Load Current: 199 Amps Max
  
• Charge Current: 199 Amps Max
• Shunt: Standard 50 millivolt @ 200 Amp

Cables Supplied:

• 
  
• 200 Amp shunt link to M8 Ring terminal.
• 5 meter from display unit to battery - fused and fitted with ring terminals for shunt, fuse holder, and M8 ring terminal to battery.

Display Unit:

• 
  
• Standard 110m squre clipper case. High contrast LCD, backlit for night viewing.
• Minimum voltage visual alarm
  
• Simple operation: 4 keys to select backlight, Volt/Amp/State of charge screen, AMP hours or time to run.

The Clipper Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has 7 levels of illumination and gives True or magnetic heading. The sensor which is gimballed for plus/minus 45 degrees of pitch and roll, is mounted in a position where stray magnetic fields are at a minimum. An electronic auto calibration then cancels out small errors.

Steer to Course Function - When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound.

Technical Specifications:

• Supply voltage nominal 12v DC
  
• Consumption, 120mA+ (25mA for display illumination max)
  
• Fluxgate accuracy +/- 1 degree
  
• Adjustable Damping
  
• 1 Degree display resolution
  
• Display case size 110 x 110 m
  
• Depth behind panel 30mm
  
• Fluxgate 175mm diameter x 95mm
  
• Sensor supplied with 5 meters of cable
  
• Face Cover included
  
• Extension cables available

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.

Technical Specifications:

• 40mm high digits
  
• Depth below transducer/below keel/below surface
  
• Deep and shallow alarms (audible and visual)
  
• User selectable feet or metres
  
• Intelligent gain control & manual override
  
• Selectable display rate and depth averaging rate
  
• Depth trend indicator
  
• High transmit power
  
• All settings stored in non-volatile memory
  
• Tactile keypad
  
• Complete with weather cover and transducer
  
• Consumption 20mA +25Ma for backlight (max)

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.

Technical Specifications:

• 40mm high digits
  
• Depth below transducer/below keel/below surface
  
• Deep and shallow alarms (audio and visual)
  
• User selectable feet or meters
  
• Intellegent gain control & manual override
  
• Selectable display rate and depth averaging rate
  
• Depth trend indicator
  
• No echo indicator
  
• High transmit power
  
• All settings stored in non volatile memory
  
• Tactile keypad
  
• Consumption 20mA + 25Ma for backlight (max)
  
  ***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit.
  

Spare 150kHz depth transducer with 7 meter cable.

Best selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting.

Technical Specifications:

• Depth Sounder in feet and meters
  
• Shallow alarm and keel offset
  
• Complete with well proven Transducers
  
• Speed in MPH, Knots and Km/H
  
• Trip and Total Distance in Miles, Nautical Miles, and Kilometers
  
• Speed Limit Alarm
  
• Face Cover included

EX-1 Exhaust Temperature Monitor/Alarm

The EX-1 continually displays the exhaust gas temperature in wet exhaust systems giving advanced warning of potential problems.

The EX-1 measures the exhaust gas temperature directly and displays it in degrees centigrade or Fahrenheit. Once the normal working temperature has been established a maximum temperature, a few degrees higher, can be programmed into the EX-1 which will then sound an alarm if that temperature is exceeded.Even a small rise in temperature can indicate a potential problem such as a minor blockage, leak or failing pump which can be corrected before a complete failure occurs.

Technical Specifications

• Compact size 125 x 62 x 23mm with high contrast LCD
  
• Supply current less than 1.5mA
  
• Supply Voltage 8 to 15 volts DC.
  
• Supplied with sensor and 5M cable
  
• Temperature range -35 to +170° Centigrade
  
• Threshold range -35 to +170° Centigrade.( -31 to +338° Fahrenheit.)

Complete kit for mounting depth transducer inside GRP hull.

Protect your Clipper instrument from the elements with this spare weather cover.

MOBi Fob

• Waterproof fob uses standard AAA type batteries
  
• Compact display size: 150 x 112 x 42mm
  
• Fob weight:100 grams
  
• Fob dimensions 77 x 47 x 38mm max with belt clip

MOBi Man Overboard Indicator

The MOBi is a state of the art, fail-safe transponder man overboard system. It consists of a base unit and up to eight active transponders for crew or valuable equipment. In operation the base station sequentially interrogates each transponder which then broadcasts its presence. In the event of a crew member falling overboard the drop in signal level is detected by the base unit which sounds a high intensity audible alarm. To aid identification of the missing crew member the base station continually displays the names of all the crew currently logged on, the signal levels of their transponder fob and their current status. Three AAA cells power each transponder for several weeks of continuous use. Should the base station be turned off the transponders will go to sleep with a life of several years.

Technical Specifications:

• Failsafe transponder technology
  
• Pin code identified
  
• High contrast display with white backlight
  
• Current consumption 50mA at 12V + 50mA for backlight
  
• Complete with 3 MOBi fobs
  
• Waterproof fob uses standard AAA type batteries
  
• Compact display size: 150 x 112 x 42mm
  
• Fob weight:100 grams
  
• Fob dimensions 77 x 47 x 38mm max with belt clip

NMEA Compass Sensor

• Compact and waterproof NMEA compass sensor transmits NMEA 0183 sentence HDG to Clipper, Target and Cruiser or other equipment.
• Complete with 10 meters of cable
• Accuracy +/- 2 degrees
• Gimballed to +/- 30 degrees
• Output frequency 1Hz
• Outputs NMEA 0183 sentence HDG
  
• 12V supply
• Dimensions 72mm x 68mm x 40mm
• Weight 475 grams including 10 meter cable

Spare paddlewheel and spindle, simple fit for all Clipper Logs.

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. As with all Nasa instruments - they are excellent value too.

Technical Specifications:

• 40mm high characters
  
• Speed (Knots/m.p.h.)
  
• Trip Distance (N.Miles / Miles)
  
• Total Distance (N.Miles / Miles)
  
• Trend indicator shows acceleration / deceleration
  
• Selectable speed averaging
  
• Tactile keypad
  
• Complete with weather cover and paddlewheel unit
  

Complete Paddle Wheel Unit

Spare complete log impellor unit with skin fitting and 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Supernova Combi Tri and Anchor L.E.D Mastlight

Supernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.

A simple two wire connection powers the Combi light. Connecting the red wire to positive and the black wire to negative will illuminate the tricolor light. Reversing the connections will illuminate the anchor light.A rotary switch is supplied with the Combi light to facilitate the supply reversal.

In the central position both lights are off. Switching clockwise or anticlockwise selects the required lighting configuration.If a toggle or rocker switch is preferred, to match existing switches, then a centreoff two pole changeover switch can be used.

Technical Specifications:

• Supply voltage - 10 to 20 volts (For full brightness)
• Supply current - 200 mA @ 12 volts
  (Typically 90% less than equivalent incandescent lamps)
• Night time visibility - 2 nautical miles minimum
  (25 degrees above and below the centerline)
• Waterproofness - IP65 (Water jets), IP67 (Submersion)
  
• Dimensions - 91 mm diameter x 133 mm Height (including mounting)
• Configuration: Anchor light version - 360 degrees white;
  Tri-color version - 112.5 degrees Red, 112.5 degrees green, 135 degrees white

Supernova navigation lights are intended for use on vessels up to 12 metres in length. They comply with CE generic EMC standards and are waterproof to IP65 and IP67. There is no specific EU standard for LED navigation lights. Supernova lights do not have any national approvals.

Supernova Tricolor Navigation Light

Supernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.

Specifications:

• Supply voltage – 10V to 20V (For full brightness)
• Supply current – 200mA @ 12V (Typically 90% less than equivalent incandescent lamp)
• Night time visibility – 2 nautical miles minimum (25° above and below the centerline)
• Waterproof Rating – IP67 (Submersion)
• Dimensions – 91mm diameter x 113mm Height (including mounting)

Configuration:

• Anchor light version – 360 degrees white
• Tri-color version – 112.5 degrees red, 112.5 degrees green,135 degrees white

Wind Anemometer Cup Kit for Version 2 - 3 Wire Units

Spare anemometer cup assembly with fixings and illustrated fitting instructions. 

Clipper, Target, Cruiser Wind Version 2 – Three wire mast units, Wireless and Tactical masthead units.

Spare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units.  For 5 wired units.

The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard.

Technical Specifications:

• 
  
• Supply voltage Nominal 12v DC
• Consumption, 50mA+ (25mA for display illumination max)
  
• Keypad adjustment of masthead alignment
• 7 levels of display backlighting
  
• Display case size 110 x 110 mm
• Depth behind panel 30mm
  
• Anemometer head 210 x 140mm
• 5 and 20 meter extension cables available
• Compatible with Standard Horizon CP180 and CP300 plotters

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wired Tactical Wind Mast Sensor

A high performance system that sends NMEA wind speed and direction data 10 times a second.

In demanding conditions, where high performance is essential, the Clipper Tactical wind mast sensor is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. The output data is in the NMEA 0183 format and can be used to drive any compatible display that utilises the MWV sentence.

Features:

• Mast transmitter supplied with 20M of cable
• NMEA 0183 4800 Baud data sentence MWV – update rate = 10 per second
• Wind speed 0 to 99.9 Kts
• Wind direction 0 to 360°
• Supply voltage nominal 12V
• Wind sensor supply current 9mA

Wireless Masthead & Data Box

The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit.

• Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery.
  
• Easy insta ll ation with mast in place no wires to run down
  
• Simple masthead alignment through base unit
  
• Light weight - 190 grams

Specifications:

• Sleep time > 15,000 Hours *
  
• Operating time > 2,000 Hours *
  
• Charging time < 150 Hours of bright daylight

* Fully charged with no further daylight

NMEA 0183 4800 Baud
0/P Level 0 to 12 volt
from 220 ohm source resistance.
NMEA data sentence MWV
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17mA
Fuse 1 Amp.

Display
Wind speed and direction data to any compatible NMEA device
The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

Display Unit Spcifications

• Supply voltage Nomina l12V DC
  
• NMEA 0183 input sentence MWV
  
• 9 levels of display backlighting
  
• Display case size 110 x 11Omm
  
• Depth behind panel 30mm
  
• Consumption, 1OmA+ (1OmA for display illumination max)