Shop by Brand: Barton Marine

ClamSeal

The ClamSeal™ can instantly repair splits and tears up to 3.5" (90mm) in length without using any hand tools or adhesives.

ClamSeal™ is a glueless repair system that instantly repairs small tears or splits in inflatables above or below the waterline, regardless of the fact that the material may be wet.

The system works by using two half 'shells' that screw together tightly, using the inflatable material itself as a water and air-tight seal.  It is quick and easy to fit and provides an immediate repair that keeps you afloat until a more permanent repair can be made.

The ClamSeal™ can be carried as part of your emergency equipment onboard.  It can be used at sea, on shore, and even underwater as no adhesive or tape is involved.  The clever mechanics of the ClamSeal™ design mean this simple product can keep you safely afloat.

Compatible With:

• RIBs
• Dinghies
• Liferafts
• Buoyancy bags
• Virtually any inflatable product

Features:

• Quick and easy to fit
• Requires no adhesive or tape
• Can be used above or below the waterline
• Provides an instant repair
• Reusable again and again

*Sold as an Individual 

Dinghy Mast Prop

Designed to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.

The yolk features a soft neoprene pad to protect the mast, shrouds, and lines. Generous eyelets in the yolk allow for a securing line to be easily attached. A trailer board can be fitted to the cross plate with 2 x 6mm screws (not supplied).

Features:

• Easy to fit
• No fastenings required
• Fully and easily adjustable
• Increases towing safety
• Prevents damage to mast and deck

Double Rope Clutch

Max Rope Diameter:Up 12mm(0.47")
Fastening: 6mm x 4 (0.24" x 4)
SWL:550kg (1,212.54lbs)

The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.

The true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.

A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).

The clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.

The D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts.

Drain Plug - Black 15mm (19/32")

This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.

Specifications:

• Length: 15mm (19/32")
• weight: 7gm(.23oz)

Extra Large Wincher Pair

The Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.

The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.

Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.

Technical Specifications:

• Fits Drum Diameter - 3.5" to 4" (90 to 100 mm)
• Maximum Rope Diameter - .47" to .63" (12 to 16 mm)
• Weight - 13.65 oz (387 g) 

*Sold as a Pair

Furling Drum - 3.74"

Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.

Features:

• Holds up to 8.5M of Line

Specifications:

• Drum Diameter: 95mm
• Sail Area: 100 square foot
• Break Load: 1,108kg
• Safe Working Load: 554kg
• Weight: 281g

Furling Top Swivel

The top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.

Features:

• Drum Diameter: 25mm
• Sail Area: 100 square foot
• Break Load: 1,108kg
• Safe Working Load: 554kg
• Weight: 55g

Genoa Car - Fits 25mm (1") T Track

Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob

A popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.

Features:

• 'Spectro' grey anodized finish
• Anodized and supplied in metric lengths
  • The stainless steel plunger stops with positive action
  • Molded nylon slide inserts ensure free running
  • Large, easy-grip plunger knobs
  • Heavy-duty Genoa car options
  • Variety of applications on larger dinghies, dayboats, and light cruisers/racers
  • Cars and sliders are compatible with all makes of 'T' track
  • Modified slider inserts available for obscure sizes
  • 25mm 'T' Section Track
  • Drilled for fastenings and plunger stops

Specifications and Dimensions:

• Length: 80mm (3.15")
• Width: 42mm (1.65")
• Height: 87mm (3.43")
• Sheave Ø: 40mm (1.57")
• Max Rope Ø; 2 x 12mm (2 x 0.47")
• Break Load: 2,280kg (5,026.54lbs)
• SWL: 1,140kg (2,513.3lbs)
• Weight: 247g (0.54lbs)

Genoa Car - Fits 32mm (1-1/4") T Track

Feature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is through-bolted and riveted for extra strength.

A popular range of Genoa cars and sliders designed to run on a 32mm (1-1/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.

Molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.

Features:

• 'Spectro' grey anodized finish
• The stainless steel plunger stops with positive action
• Molded nylon slide inserts ensure free running
• Large, easy-grip plunger knobs
• Cars and sliders are compatible with all makes of 'T' track
• Modified slider inserts available for obscure sizes

32mm 'T' Section Track

Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths.

Specifications and Dimensions:

• Length: 109mm (4.3")
• Width: 52mm (2.05")
• Height: 102mm (4.02")
• Sheave Ø: 50mm (1.97)
• Max Rope Ø; 2 x16mm (2 x 0.63")
• Break Load: 3,280kg (7,231.7lbs)
• SWL: 1,640kg (3,615.6lbs)
• Weight: 469g (1.03lbs)

Genoa Slide with Loop for 32mm Track

Have a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4") 'T' track. All are manufactured from high-quality marine grade aluminum and finished with our unique 'Spectro' grey anodized finish for added protection. This slider has molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion. 

Features:

• 'Spectro' grey anodized finish
• The stainless steel plunger stops with positive action
• Molded nylon slide inserts ensure free running
• Large, easy-grip plunger knobs
• Heavy-duty Genoa car options

32mm 'T' section track

Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths

Specifications & Dimensions:

• Length: (mm) 109 / (inch) 4-5/16"
• Width: (mm) 52 / (inch) 2-1/16"
• Height: (mm) 50 / (inch) 1-15/16"
• Break Load: (kg) 2980 / (lbs.) 6,570
• SWL: (kg) 1490 / (lbs.) 3,285 
• Weight (grams): 254 g

Large Wincher Pair

The Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.

The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.

Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.

Technical Specifications:

• Fits Drum Diameter - 3" to 3.5" (76.2 to 88.9 mm)
• Maximum Rope Diameter - .47" to .55" (12 to 14 mm)
• Weight - 9.8 oz (278 g) 

*Sold as a Pair

Line Tamer - Grey Pair

A line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. 

Features:

Suitable for rope coils of up to 7.87" (20) cm diameter

*Sold as a Pair

Line Tamer - White Pair

A line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. 

Features:

• Suitable for rope coils of up to 7.87" (20) cm diameter

*Sold as a Pair

Medium Wincher Pair

The Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.

The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.

Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.

Technical Specifications:

• Fits Drum Diameter - 2.75" to 3" (70 to 80 mm)
• Maximum Rope Diameter - .39" to .55" (10 to 14 mm)
• Weight - 7.87 oz (223 g) 

*Sold as a Pair

Ratchet Block - 55mm

The Barton Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats and for small yachts up to 30 feet.

Combining high-performance engineering and contemporary design, the 2-3/16" (55 mm) ratchet block is the first in a planned range of sizes, it also offers a stainless steel lever that locks the swivel head if desired.

The new Ratchet Block allows sailors to easily handhold loaded lines and offer a balance between holding power and controlled easing.

Designed for low friction and longevity in harsh marine environments, the Ratchet Block body is manufactured from a composite of high-density nylon and glass fiber reinforced polymer with a high level of UV protection. Internal components are of marine grade 316 stainless steel and the 12 faced aluminum sheave is anodized in gunmetal silver

Technical Specifications:

• Safe Working Load - 661 lb (300 kg) 
• Breaking Load - 2,646 lb (1,200 kg) 
• Maximum Rope Diameter - 3/8" (10 mm)
• Weight - 4.8 oz (135 grams)

*Sold as an Individual

Series 3 Single Snap Shackle & Becket Block - 45mm

Plain Bearing Blocks

Barton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.

Specifications

• Sheave size: 45mm x 13mm
• Max rope diameter: 10mm
• Safe working load: 400kg / 881lbs
• Breaking load: 800kg / 1763lbs
• Length: 120mm
• Weight: 107g

Shroud Cleat with Eye

Barton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.

Features:

• Wide eye opening for stowage of shackles
• Clamps onto shroud wire without causing damage
• Simple and convenient to install
• Durable marine grade nylon construction

Specifications:

• Color - Black
• Material - Nylon
• Length - 100mm (4")
• Weight - 26 grams

In the Box:

• Shroud cleat w/eye
• Mounting hardware

Size 2 Single Upright Block

Plain Bearing Blocks

Barton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.

Specifications

• Sheave size: 35mm x 12mm
• Max rope diameter: 8mm
• Safe working load: 370kg / 815lbs
• Breaking load: 740kg / 1630lbs
• Length: 80mm
• Weight: 73g

Size 5 Vang Tackle 4:1

Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. 

Compatible With:

• Boats up to 35' (10.7 M)

Technical Specifications:

• Head - Snap Shackle
• Mechanical Advantage - 4:1
• Line - 40' (12.2 M) of 3/8" (10 mm) Braided polyester line
• Safe working load - 1,650 lb (750 kg)

In the Box:

• N05641 Fiddle block with snap shackle
• Becket and Cam cleat
• N054400 Fiddle block with snap shackle
• Line

*Sold as an Individual

Slab Reefing Kit
Supplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and 'Spectro' anodised aluminium.
Complete with sufficient length of 'T' Track and end stops.

Supplied with 60cm of 25mm anodised 'T' Track

For Yachts up to 8.5M (28')

Small Furling Drum - 2.99"

Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.

Features:

• Holds up to 4.3M of Line

Specifications:

• Drum Diameter: 76mm
• Sail Area: 60 square foot
• Break Load: 1,108kg
• Safe Working Load: 554kg
• Weight: 218g

Small Wincher Pair

The Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.

The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.

Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.

Technical Specifications:

• Fits Drum Diameter - 2.5" to 2.75" (64 to 70 mm)
• Maximum Rope Diameter - .31" to .39" (8 to 10 mm)
• Weight - 7.13 oz (202 g) 

*Sold as a Pair

Stainless Steel Rubbing Strakes - 203 x 19mm (7-7/8" x 3/4"

By popular demand Barton Marine introduces a range of stainless steel rubbing strakes,to help prevent rope wear to deck edges and coamings.These attractive strakes are easy to fit and will last a lifetime.

Stanchion Cleat

Designed to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.

Technical Specifications:

• Material - Nylon
• Dimensions (Cleat length) - 4.37" (111 mm)
• Weight - 3.17 oz (90 g)
• Maximum Stanchion (Tube) Size - 1" (25mm) 

*Sold as an Individual 

Towable Genoa Car - Fits 25mm(1") T-Track

Towable genoa cars
With tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown.

• Length:170mm
  
• Width:42mm
  
• Height:87mm
  
• Sheave Diameter:40mm
  
• Max Rope Diameter:2 x 12mm
  
• Break Load:2,280kg
  
• Safe Working Load:1,140kg
  
• Weight:297g

A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique
'Spectro' grey anodised finish for added protection.

All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.

• 'Spectro' grey anodised finish
  
• Stainless plunger stops with positive action
  
• Moulded nylon slide inserts ensure free running
  
• Large, easy-grip plunger knobs

Towable Genoa End & Becket - Fits 25mm(1") T-Track

• Length:88mm
  
• Width:37mm
  
• Height:50mm
  
• Sheave Diameter:35mm
  
• Max Rope Diameter:8mm
  
• Break Load:N/A
  
• Safe Working Load:N/A
  
• Weight:121g

A popular range of genoa cars and sliders designed to run on 25mm (1") 'T'
track. All are manufactured from high quality marine grade aluminium and
finished with our unique
'Spectro' grey anodised finish for added protection.

All cars and sliders have moulded nylon inserts to ensure free, smooth
running under load and prevent damage to finish or potential corrosion.

• 'Spectro' grey anodised finish
  
• Stainless plunger stops with positive action
  
• Moulded nylon slide inserts ensure free running
  
• Large, easy-grip plunger knobs

Transom Pintle

Manufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.

Features:

• Pintle Diameter: 9.5mm
• Fastenings Diameter: 5mm
• Weight: 70g

Winch Handle Pocket

The winch handle pocket is manufactured to safely store and secure a wide range of handle types. 

Convenient hole on the bottom to allow drainage and increased airflow.

Technical Specifications:

• Dimensions - 12.6" x 3.54" x 1.97" (320 x 90 x 50 mm)
• Material - Moulded PVC

*Sold as an Individual