3-Way Bilge Panel - 12/24V Three- positions switch bilge pump control panel 12/24V. Manual, automatic and off. The automatic feature operates in combination with automatic bilge level switches or automatic bilge pumps. Integrated fuse holder, fuse and operating light. |
Accumulator Tank - 0.85L (0.22g) Accumulator and pulsation dampering tank for water pressure systems. Premium solution for a maximum smoothness flow system. Corrosion free. |
Automatic Bilge Pump 1100 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Fixed 29 mm (1,15″) straight discharge port. 4A fuse. For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length. Features: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in Automatic Submersible CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Automatic Bilge Pump 1100 GPH - 24V Fully automatic bilge pump 24V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Fixed 29 mm (1,15″) straight discharge port. 2,5A fuse. For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length. Features:
|
Automatic Bilge Pump 500 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 32 L/min (500 GPH) and 25 L/min (400 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Including 19 mm (3/4″) straight and elbow detachable discharge ports. 1,8A fuse. For pleasure boats up to 6m (20 Ft) length. Features:
|
Automatic Bilge Pump 750 GPH - 24V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Including 19 mm (3/4″) straight and elbow detachable discharge ports. 2,7A fuse. For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length. Features:
|
Bilge Float Switch - 12/24/30V The 12/24/30V bilge float switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed. For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Safe removal of bilgewater when nobody is onboard, approved for 500 000 cycles. 14A fuse. Features:
|
Bilge Pump Heavy Duty 1750 GPH - 12V Submersible heavy duty bilge pump 12V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 6A fuse. For pleasure or commercial boats above 10m (30Ft) length. Interchangeable with Rule 1500, Johnson Pump 16004-00 /32-1600-01. Features:
|
Bilge Pump Heavy Duty 1750 GPH - 24V Submersible heavy duty bilge pump 24V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 3A fuse. For pleasure or commercial boats above 10m (30 Ft) length. Interchangeable with Rule 1500, Johnson Pump 16084-00/32-1600-02. Features:
|
Bilge Pump Heavy Duty 2250 GPH - 12V Submersible heavy duty bilge pump 12V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 8A fuse. For pleasure or commercial boats above 12m (36 Ft) length. Interchangeable with Rule 2000, Johnson Pump 22004/32-2200-01. Features:
|
Bilge Pump Heavy Duty 2250 GPH - 24V Submersible heavy duty bilge pump 24V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 4,5A fuse. For pleasure or commercial boats above 12m (36 Ft) length. Interchangeable with Rule 2000, Johnson Pump 22084/32-2200-02. Features:
|
Bilge Stainer Vertical 25mm (1"0), 38mm (1-1/2") Vertical mounted bilge strainer with non-return valve. Maintains water in the suction line for easy prime. Prevent bilge debris blocking the pump or inlet suction line. Easy to maintain and clean. |
Cartridge Aerator Pump - 500 GPS - 12V - Angled Cartridge Aerator Pump 12V with flowrate 32l/min (500GPH) with angeled intake. Equipped with both straight and elbow 19mm (3/4″) detachable ports. Amperage 1,8A, fuse size 5A. Easy to install, maintain and to replace the cartridge. |
Cartridge Bilge Pump 1100GPH - 12V Submersible bilge pump 12V with pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Replaceable cartridge motor. Easy maintenance and low power consumption. Fixed 29 mm (1,15″) straight discharge port. Amperage 4A, fuse size 5A. For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length. |
Cartridge Bilge Pump 750GPH - 12V Submersible bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Replaceable cartridge motor. Easy maintenance and low power consumption. Including 19 mm (3/4″) straight and elbow detachable discharge ports. Amperage 2,7 A, fuse size 5A. For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length. |
Cartridge Bilge Pump Low 750GPH - 12V Submersible low bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Replaceable cartridge motor. Easy maintenance and low power consumption. Including 19 mm (3/4″) straight and elbow detachable discharge ports. Amperage 2,7 A, fuse size 5A. For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length. |
Digital Bilge Switch - 12/24V The 12/24V digital bilge switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed. For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Field sensing digital technology, fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. Features:
|
Digital High Water Alarm - 12V The 12V digital bilge sensor detects when there is water in the bilge or a tank. Field sensing digital technology, fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. 12V display panel, 1 LED and piezo alarm integrated, including 152mm (6″) wire leads, fuse and fuse holder. Features:
|
Active Carbon Filter Prevents outside odor coming from tank by connecting it at the highest point along the breather hose. With 16,19,25 mm (3/8″,3/4″,1″) adjustable ports. Features:
|
Comfort Seat SC Original softclose seat for Comfort models. Features:
|
Compact Seat Original wooden seat for Compact and Design models. Features:
|
Control Panel 2kW - 12V Illuminated on/off control - 12V |
Control Silent Electric Toilet Rocker Switch 2 function rocker switch control panel 12/24V for waste disposal and flushing. Features:
|
Solenoid Valve - 24V 24V electric valve to be used with centralized fresh water system. Features:
|
Vented Loop 19 19mm (3/4″) air valve loop to prevent back siphoning for waste water systems. Safety requirement for waste water systems mounted below water line. Features:
|
Vented Loop 25 25mm (1″) air valve loop to prevent back siphoning for waste water systems. Safety requirement for waste water systems mounted below water line. Features:
|
Vented Loop 38 38mm (1,5″) air valve loop to prevent back siphoning for waste water systems. Safety requirement for waste water systems mounted below water line. Features:
|
Y-Valve HD Heavy Duty Y-valve for installation in waste discharge and bilge pump-out systems. Allows waste water to be diverted to tank or pump-out. Features:
|
Premium Impeller Kit - 39.7 x 12 x 19.2mm - 6 Blade - Single Flat Insert Replaces JMP 7013-01, Sherwood 08000K. Specifications:
|
Premium Impeller Kit 95 x 24 x 101.5mm - 12 Blade - Spline Insert Replaces JMP 8350-01, Johnson Pump 09-705BT-01, Sherwood 18000K. Specifications:
|
Solenoid Valve - 12V 12V Electric Valve to be used with centralized fresh water system. Features:
|
WPS/WD Inlet Strainer 40 Mesh Inlet strainer 40 mesh universal quick connect for WPS/ WD pump inlets. Protects the pump to ensure long service life and optimal performance. Easy regular manitainance by just opening the lid and cleaning the inside filter metal mesh. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |