Leapers UTG PRO 1in 2pc Medium Profile P.O.I Picatinny Rings / Each

The Leapers UTG PRO 1 inch 2 pc Medium Profile P.O.I Picatinny Rings are proudly designed and made in the USA. The Medium Profile P.O.I rings have a 28mm center height to fit optics with a 1 inch tube and up to a 55mm outer objective. The Innovative P.O.I addresses 3 of the most critical areas in scope rings. They are progressively machined for a precise inner ring surface to achieve a seamless ring-to-scope interaction. The low profile and flush-fitting locking side plate is controlled by dual spring loaded guide rods interfacing with the rail with Torx screw locking to ensure secure and repeatable zero hold. The square shaped integral recoil stop interfaces with a Picatinny slop via complete surface contact to eliminate the possibility of forward and aft movement from recoil vibrations. These Picatinny rings are machined from 6061-T6 aluminum alloy and 4605 steel with a matte black hard coat anodize. They are designed to fit on Mil-spec Picatinny rail platforms and each 2 ring set is equipped with 4 top Torx screws designed with a 22mm ring width.